SIST EN ISO 150:2007
(Main)Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006)
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006)
This International Standard specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.
Rohleinöl, Lackleinöl und Leinölfirnis für Beschichtungsstoffe - Anforderungen und Prüfung (ISO 150:2006)
Huiles de lin brutes, raffinées et cuites, pour peintures et vernis - Spécifications et méthodes d'essai (ISO 150:2006)
L'ISO 150:2006 spécifie les exigences et les méthodes d'essai correspondantes des huiles de lin brutes, raffinées et cuites, pour peintures et vernis.
Surova, rafinirana in kuhana olja iz lanenih semen za barve in lake - Specifikacije in preskusne metode (ISO 150:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 150:2007
01-julij-2007
Surova, rafinirana in kuhana olja iz lanenih semen za barve in lake - Specifikacije
in preskusne metode (ISO 150:2006)
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods
of test (ISO 150:2006)
Rohleinöl, Lackleinöl und Leinölfirnis für Beschichtungsstoffe - Anforderungen und
Prüfung (ISO 150:2006)
Huiles de lin brutes, raffinées et cuites, pour peintures et vernis - Spécifications et
méthodes d'essai (ISO 150:2006)
Ta slovenski standard je istoveten z: EN ISO 150:2007
ICS:
87.060.99 Druge sestavine barv Other paint ingredients
SIST EN ISO 150:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 150:2007
---------------------- Page: 2 ----------------------
SIST EN ISO 150:2007
EUROPEAN STANDARD
EN ISO 150
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2007
ICS 87.060.20
English Version
Raw, refined and boiled linseed oil for paints and varnishes -
Specifications and methods of test (ISO 150:2006)
Huiles de lin brutes, raffinées et cuites, pour peintures et Rohleinöl, Lackleinöl und Leinölfirnis für
vernis - Spécifications et méthodes d'essai (ISO 150:2006) Beschichtungsstoffe - Anforderungen und Prüfung (ISO
150:2006)
This European Standard was approved by CEN on 21 January 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 150:2007: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 150:2007
EN ISO 150:2007 (E)
Foreword
The text of ISO 150:2006 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 150:2007 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2007, and conflicting national
standards shall be withdrawn at the latest by August 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 150:2006 has been approved by CEN as EN ISO 150:2007 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 150:2007
INTERNATIONAL ISO
STANDARD 150
Second edition
2006-02-15
Raw, refined and boiled linseed oil for
paints and varnishes — Specifications
and methods of test
Huiles de lin brutes, raffinées et cuites, pour peintures et vernis —
Spécifications et méthodes d'essai
Reference number
ISO 150:2006(E)
©
ISO 2006
---------------------- Page: 5 ----------------------
SIST EN ISO 150:2007
ISO 150:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2006 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 150:2007
ISO 150:2006(E)
Contents Page
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Required characteristics and their tolerances . 2
5 Sampling . 2
6 Density . 2
7 Refractive index . 2
8 Clarity . 2
9 Phosphoric acid test (PAT) value (for raw linseed oil only) . 4
10 Drying time (for boiled linseed oil only) . 7
11 Assessment of break in alkali-refined linseed oils . 7
12 Test report . 8
Annex A (informative) Standard values for the composition of fatty acids of raw linseed oil . 9
©
ISO 2006 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 150:2007
ISO 150:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 150 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 10, Test
methods for binders for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 150:1980), which has been technically revised.
The main changes are:
— The requirements for turbidity (clarity) have been changed.
— The maximum acid value for alkali-refined linseed oil has been changed to 1,0 mg KOH/g.
— The determination of unsaponifiable-matter content, foots, colophony (rosin), fish oil and mineral acid have
been deleted because they are no longer necessary.
— The determination of volatile-matter content has been replaced by the determination of water content.
— The determination of ash has been deleted because it is not required very often.
— Standard values for the composition of fatty acids of raw linseed oil have been added (see Annex A).
©
iv ISO 2006 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 150:2007
INTERNATIONAL STANDARD ISO 150:2006(E)
Raw, refined and boiled linseed oil for paints and varnishes —
Specifications and methods of test
1Scope
This International Standard specifies the requirements and the corresponding methods of test for raw, refined
and boiled linseed oils for paints and varnishes.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 835-1, Laboratory glassware — Graduated pipettes — Part 1: General requirements
ISO 1517:1973, Paints and varnishes — Surface-drying test — Ballotini method
ISO 2114, Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value
and total acid value
ISO 2811-1, Paints and varnishes — Determination of density — Part 1: Pyknometer method
ISO 3681, Binders for paints and varnishes — Determination of saponification value — Titrimetric method
ISO 3961, Animal and vegetable fats and oils — Determination of iodine value
ISO 4630-1, Clear liquids — Estimation of colour by the Gardner colour scale — Part 1: Visual method
ISO 4630-2, Clear liquids — Estimation of colour by the Gardner colour scale — Part 2: Spectrophotometric
method
ISO 4793, Laboratory sintered (fritted) filters — Porosity grading, classification and designation
ISO 5661, Petroleum products — Hydrocarbon liquids — Determination of refractive index
ISO 8534, Animal and vegetable fats and oils — Determination of water content — Karl Fischer method
ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
raw linseed oil
oil obtained solely from mature seeds of linseed (Linum usitatissimum L.)
3.2
acid-refined linseed oil
oil obtained by refining raw linseed oil with acid
©
ISO 2006 – All rights reserved 1
---------------------- Page: 9 ----------------------
SIST EN ISO 150:2007
ISO 150:2006(E)
3.3
alkali-refined linseed oil
oil obtained by refining raw linseed oil with sodium hydroxide or other alkali solution
3.4
boiled linseed oil
oil obtained by incorporating driers in raw linseed oil or refined linseed oil and heating either alone or while
blowing air or oxygen through the oil
3.5
break
separation of an (insoluble) mucilaginous product which occurs when certain unrefined vegetable oils are
heated
NOTE When separation occurs, the oil is said to “break”. The insoluble matter is also referred to as the “break”.
4 Required characteristics and their tolerances
Raw, refined and boiled linseed oils shall have the characteristics specified in Table 1.
5 Sampling
Take a representative sample of the oil in accordance with ISO 15528.
6Density
◦
Determine the density at 23 C or another agreed temperature by the method specified in ISO 2811-1. (See
Footnote “a” to Table 1.)
7 Refractive index
◦
Determine the refractive index at 23 C or another agreed temperature by the method specified in ISO 5661.
(See Footnote “a” to Table 1)
8Clarity
8.1 Raw oil
◦
Heat a well-mixed test portion to 65 C and examine it immediately for the presence of insoluble impurities.
8.2 Alkali-refined, acid-refined and boiled oil
◦ ◦
Keep a well-mixed test portion at 15 C to 20 C for 24 h and then examine it for the presence of sediment and
for other insoluble matter.
©
2 ISO 2006 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 150:2007
ISO 150:2006(E)
Table 1 — Required characteristics and their tolerances
Requirement
Characteri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.