SIST EN ISO 8092-4:2000

Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997)

Specifies dimensions for the pins of single- and multi-pole connections and specific requirements, for on-board electrical wiring harnesses of road vehicles. Applies to connections designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.

Straßenfahrzeuge - Steckverbindungen für das elektrische Fahrzeug-Bordnetz - Teil 4: Rundstecker für ein- und mehrpolige Steckverbindungen - Maße und besondere Anforderungen (ISO 8092-4:1997)

Dieser Teil von ISO 8092 legt Maße von Rundsteckern für ein- und mehrpolige Steckverbindungen für das elektrische Bordnetz von Straßenfahrzeugen und besondere Anforderungen fest. Er ist auf Steckverbinder anwendbar, die nach der Montage im Fahrzeug nur bei Reparatur und/oder Instandhaltung abgezogen werden.

Véhicules routiers - Connexions pour faisceaux de câblage électrique embarqués - Partie 4: Broches pour raccordements unipolaires et multipolaires - Dimensions et exigences particulieres (ISO 8092-4:1997)

La présente partie de l'ISO 8092 prescrit les dimensions et les exigences particulières relatives aux broches pour raccordements multipolaires pour les faisceaux de câblage électrique à bord des véhicules routiers. Elle est applicable à des connecteurs conçus pour être débranchés après montage dans le véhicule, uniquement en cas de réparation et/ou de maintenance.

Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2000
• Withdrawal Date: 09-May-2024
• ICS: 43.040.10 - Electrical and electronic equipment
• Technical Committee: SS SPL - Technical Board for the general field
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-May-2024
• Due Date: 02-Jun-2024
• Completion Date: 10-May-2024
• Ref Project: EN ISO 8092-4:1999 - Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-4:1997)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8092-4:2000
01-december-2000
Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins
for single- and multi-pole connections - Dimensions and specific requirements
(ISO 8092-4:1997)
Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for
single- and multi-pole connections - Dimensions and specific requirements (ISO 8092-
4:1997)
Straßenfahrzeuge - Steckverbindungen für das elektrische Fahrzeug-Bordnetz - Teil 4:
Rundstecker für ein- und mehrpolige Steckverbindungen - Maße und besondere
Anforderungen (ISO 8092-4:1997)
Véhicules routiers - Connexions pour faisceaux de câblage électrique embarqués -
Partie 4: Broches pour raccordements unipolaires et multipolaires - Dimensions et
exigences particulieres (ISO 8092-4:1997)
Ta slovenski standard je istoveten z: EN ISO 8092-4:1999
ICS:
43.040.10 (OHNWULþQDLQHOHNWURQVND Electrical and electronic
RSUHPD equipment
SIST EN ISO 8092-4:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8092-4:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 8092-4:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 8092-4:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 8092-4:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 8092-4:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 8092-4:2000
INTERNATIONAL Is0
STANDARD 8092-4
First edition
1997-02-O 1
Road vehicles - Connections for on-board
electrical wiring harnesses -
Part 4:
Pins for single- and multi-pole connections -
Dimensions and specific requirements
Vkhicules routiers - Connexions pour faisceaux de &b/age klectrique
embarqu& -
Partie 4: Broches pour raccordements unlpolaires et multlpolaires -
Dimensions et exigences particulikres
Reference number
IS0 8092-4:1997(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 8092-4:2000
IS0 8092-4:1997(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 8092-4 was prepared by Technical Committee
lSO/TC 22, Road vehicles, Subcommittee SC 3, Electrical and electronic
equlpmen t.
IS0 8092 consists of the following parts, under the general title Road
Connections for on-board electrical wiring harnesses:
vehicles -
- Part 1: Tabs for single-pole connections - Dimensions and specific
requlremen ts
- Part 2: Definitions, test methods and general performance require-
ments
-
Part 3: Tabs for multi-pole connections - Dimensions and specific
requirements
- Part 4: Pins for single- and multi-pole connections - Dimensions and
specific requirements
0 IS01997
All rights reserved. Unless otherwrse specified, no par
...