iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 115:1997

(Main)

Safety rules for the construction and installation of escalators and passenger conveyors

Safety rules for the construction and installation of escalators and passenger conveyors

1.1 This standard is applicable for all new escalators and passenger conveyors (pallet or belt type).   1.2 Existing escalators and passenger conveyors are not subject to this standard. It is, however, recommended that they be adapted to this standard.   1.3 If some dimensions of this standard cannot be kept due to structural conditions in existing buildings, it has to be defined in the individual case which alternative measures are necessary.  Note: In addition see 0.5 and 0.6

Sicherheitsregeln für die Konstruktion und den Einbau von Fahrtreppen und Fahrsteigen

Diese Norm gilt für alle neu zu errichtenden Fahrtreppen und Fahrsteige (Paletten- oder Gurtkonstruktion). Bestehende Fahrtreppen und Fahrsteige unterliegen nicht dieser Norm. Es wird jedoch empfohlen, sie dieser Norm anzupassen. Können durch bauliche Gegebenheiten bei bestehenden Gebäuden einige Maße dieser Norm nicht eingehalten werden, so ist im Einzelfall festzulegen, welche Ersatzmaßnahmen erforderlich sind.

Regles de sécurité pour la construction et l'installation des escaliers mécaniques et trottoirs roulants

La présente norme s'applique a toute nouvelle installation d'escaliers mécaniques et de trottoirs roulants (a plateaux ou a bande). Les escaliers mécaniques et les trottoirs roulants existants ne sont pas soumis a la présente norme. Il est toutefois recommandé qu'ils soient adaptés a celle-ci. Si certaines dimensions indiquées dans cette norme ne peuvent etre respectées en raison des conditions de structure des bâtiments existants, il doit etre défini, cas par cas, les mesures de remplacement nécessaires.

Varnostna pravila za konstruiranje in vgradnjo tekočih stopnic in trakov za osebe

General Information

Status
Withdrawn
Publication Date
31-Jul-1997
Withdrawal Date
16-Aug-2009
ICS
91.140.90 - Lifts. Escalators
Technical Committee
DTN - Lift and transport appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Aug-2009
Due Date
06-Sep-2009
Completion Date
17-Aug-2009
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN 115:1995 - Safety rules for the construction and installation of escalators and passenger conveyors

Relations

Amended By
SIST EN 115:1997/A1:1999 - Safety rules for the construction and installation of escalators and passenger conveyors
Effective Date
01-Apr-1999
Replaced By
SIST EN 115-1:2009 - Safety of escalators and moving walks - Part 1: Construction and installation
Effective Date
01-Sep-2009
Amended By
SIST EN 115:1997/A2:2004 - Safety rules for the construction and installation of escalators and passenger conveyors
Effective Date
01-Nov-2004
Child
SIST EN 115-1:2009 - Safety of escalators and moving walks - Part 1: Construction and installation
Effective Date
10-Jan-2008

Buy Standard

EN 115:1997EN 115:1997
PreviousNext
Standard
EN 115:1997
English language
74 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheitsregeln für die Konstruktion und den Einbau von Fahrtreppen und FahrsteigenRegles de sécurité pour la construction et l'installation des escaliers mécaniques et trottoirs roulantsSafety rules for the construction and installation of escalators and passenger conveyors91.140.90Lifts. EscalatorsICS:Ta slovenski standard je istoveten z:EN 115:1995SIST EN 115:1997en01-avgust-1997SIST EN 115:1997SLOVENSKI
STANDARD



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



SIST EN 115:1997



S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 81-77:2022(Main)
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions
EN 81-77:2022

This document specifies the special provisions and safety rules for passenger and goods passenger lifts where these lifts are installed in buildings and constructions intended to withstand seismic events in compliance with EN 1998 1:2004 (Eurocode 8).
This document does not introduce any specific provisions and safety rules for lifts when ad ≤ 1 m/s2 as defined in Annex A.
This document does not address other risks due to seismic events (e.g. fire, flood, explosion).
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-70:2021+A1:2022(Main)
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability
EN 81-70:2021+A1:2022

This document specifies the minimum requirements for the safe and independent access and use of lifts
by persons, including persons with disabilities. It covers the needs of persons with disabilities according
to Annex A.
NOTE For guidance on solutions for increased accessibility and usability, see Annex D.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-58:2022(Main)
Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test
EN 81-58:2022

This document specifies the fire resistance requirements for lift landing doors which can be exposed to a fire from the landing side. This document applies to all types of lift landing doors used as a means of access to lifts in buildings and which are intended to provide a fire barrier to the spread of fire via the lift well.
It also specifies the method of testing and classification of fire resistance of lift landing doors. The test method is only valid for furnaces where the door is mounted in a vertical position. The test method allows for the measurement of integrity and if required the measurement of radiation and thermal insulation.
This document covers the hazard of fire spreading to the lift well during a defined period of time. The fire resistance requirements are expressed in terms of integrity (E), insulation (EI) and radiation (EW).
This document do not cover other technical requirements in addition to fire resistance requirements. The other technical requirements are specified in relevant product standards referring to this document.
This document refers to CO2 as means of tracing the propagation of fire. The document does not cover hazards due to emission of gasses.
This document is not applicable to lift landing doors installed in lifts before the date of its publication.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-21:2022(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building
EN 81-21:2022

This document specifies the safety rules related to passenger and goods/passenger lifts installed in existing buildings where limitations enforced by certain building constraints mean that some requirements of EN 81 20:2020 cannot be met.
This document is intended to be read and applied in conjunction with EN 81-20:2020. It addresses the following constraints and gives requirements for alternative solutions:
-   existing perforate walls of the lift well;
-   reduction in available well are leading to reduced distance between car, counterweight or balancing weight;
-   counterweight or balancing weight in a separate existing well;
-   reduced building dimensions and clearances leading to:
-   reductions in available space for headroom and pit;
-   reduced car roof balustrade dimensions;
-   reduced height of sill apron;
-   reduced height of machine and/or pulley room;
-   reduced available area for access door/trap door;
-   reduction in available height of landing doors.
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-28:2022(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts
EN 81-28:2022

This document covers the risk of entrapment of users in the car and in the well, and gives the technical requirements for the alarm systems for passenger and goods passenger lifts, as described in the EN 81 series.
This includes:
-   activation of the alarm,
-   transmission of the alarm,
-   information for use and maintenance,
-   site testing to verify the requirements of this document have been met before the lift is used.
Excluded are:
-   the failure of the communication network (see Annex A), including mobile network signal strength or similar;
-   the failure of the network power supply such that all the lifts in a geographical area create entrapment simultaneously.
This document is not applicable to alarm systems for lifts installed before the date of its publication.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-71:2022(Main)
Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts
EN 81-71:2022

This document gives requirements in order to ensure the safety of persons when using lifts which are subject to different expected levels of vandalism:
-   Category 1, where lifts are in general public, in locations which are unobserved and limited acts of vandalism might occur, e.g. an enclosed lift in a shopping center;
-   Category 2, where lifts are in general public, in locations which are unobserved where stronger acts of vandalism can be expected e.g. a lift in a public car park.
NOTE   See Annex A for further information with regard to the selection of the vandal resistance category to be applied.
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12158-1:2022(Main)
Builders' hoists for goods - Part 1: Hoists with accessible platforms
EN 12158-1:2021

1.1   This standard deals with power operated temporarily installed builders hoists (referred to as "hoists" in this standard) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a load carrying device:
-   designed for the transportation of goods only;
-   guided;
-   travelling vertically or along a path within 15 degrees max. of the vertical;
-   supported or sustained by drum driven wire rope, chain, rack and pinion, hydraulic jack (direct or indirect), or an expanding linkage mechanism;
-   where masts, when erected, may or may not require support from separate structures;
-   which permits the access of instructed persons during loading and unloading;
-   which are driven by appointed persons;
-   which permits, if necessary, during erection, dismantling, maintenance and inspection, the access and travel by persons who are competent and authorised.
1.2   The standard identifies hazards as listed in clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
1.3   This European standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   noise.
1.4   This standard is not applicable to
-   builders hoists for persons and materials;
-   lifts according to EN 8

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-22:2021(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Passenger and goods passenger lifts with inclined travel path
EN 81-22:2021

1.1   This document specifies the safety rules for the construction and installation of permanently installed new electric lifts, with traction or positive drive, serving defined landings levels, having a vehicle designed to convey passengers or passengers and loads, suspended by ropes or chains and travelling in a vertical plan along guide rails that are inclined at an angle of between 15° and 75° in relation to the horizontal.
1.2   In addition to the requirements of this document, supplementary requirements shall be considered in special cases (potentially explosive atmosphere, extreme climate conditions, seismic conditions, transporting dangerous goods, etc.).
1.3   This document does not cover:
a)   lifts with drives other than those stated in 1.1;
b)   installation of electric lifts in existing buildings to the extent that space does not permit;
c)   important modifications (see Annex E) to a lift installed before this standard is brought into application;
d)   lifting appliances, such as paternosters, mine lifts, theatrical lifts, appliances with automatic caging, skips, lifts and hoists for building and public works sites, ships' hoists, platforms for exploration or drilling at sea, construction and maintenance appliances;
e)   safety during transport, installation, repairs, and dismantling of lifts;
f)   lifts with rated speed ≤ 0,15 m/s.
However, this document may usefully be taken as a basis.
Noise is not dealt with in this document because it is not relevant to the safe use of the lift.
Vibrations are dealt with for electric parts only. Direct effects on human bodies are not considered as harmful.
1.4   This document does not specify the additional requirements necessary for the use of lifts in case of fire.
1.5   Taking into account the state of art, the scope of the present standard is limited as follows:
-   inclination: a variation in inclination is permitted for the guideway;
-   travel path: confined within the vertical plane;
-   maximum capacity of the car: 7 500 kg (100 passengers);
-   maximum rated speed (v): 4 m/s.
These both characteristics (capacity and speed) are linked by the relation given in the following Figure 1.
[Figure 1 not represented]
Key
Q   maximum capacity
V   rated speed
Figure 1 - Speed and capacity
The document applies to all the constituent components of the including: running tracks, guides, safety gear operating device, counter-rails, but excludes the supporting structures, civil engineering structures and anchorages that are dealt with by other regulations.

  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    225 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 115-2:2021(Main)
Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks
EN 115-2:2021

This document gives rules for improving the safety of existing escalators and moving walks with the aim of reaching an equivalent level of safety to that of a newly installed escalator and moving walk by the application of today’s state of the art for safety.
NOTE   Due to situations such as the existing machine or building designs, it may not be possible in all cases to reach today’s state of the art for safety. Nevertheless the objective is to improve the level of safety wherever possible.
This document includes the improvement of safety of existing escalators and moving walks for:
a)   users;
b)   maintenance and inspection personnel;
c)   persons outside the escalator or moving walk (but in its immediate vicinity);
d)   authorised persons.
This document is not applicable to:
a)   safety during transport, installation, repairs and dismantling of escalators and moving walks;
b)   spiral escalators;
c)   accelerating moving walks.
However, this document can usefully be taken as a reference basis.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 8100-30:2021(Main)
Lifts for the transport of persons and goods - Part 30: Class I, II, III and VI lifts installation
ISO 8100-30:2019

This document specifies the necessary dimensions to permit the installation of passenger lifts of class I, II, III and VI.
These dimensions reflect the requirements for the apparatus.
This document is applicable to all new lift installations, irrespective of drive systems, including a car with one entrance, to be installed in a new building. However, for arrangements with counterweight at the side, a through-entrance configuration is possible. Where relevant, this document is also applicable to an installation in an existing building.
This document is not applicable to lifts of rated speed greater than 6,0 m/s.
NOTE It is the responsibility of the user to consult the manufacturer for such installations.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off
  • Standard
    31 pages
    French language
    sale 15% off