SIST EN ISO 22074-6:2024
(Main)Railway infrastructure - Rail fastening systems - Part 6: Test method for resistance to severe environmental conditions (ISO 22074-6:2021)
Railway infrastructure - Rail fastening systems - Part 6: Test method for resistance to severe environmental conditions (ISO 22074-6:2021)
This document specifies a laboratory test procedure for finding the effect of exposure to severe environmental conditions on the fastening system.
This test procedure applies to a complete fastening assembly including embedded rail with mechanical fastenings. It is not applicable to embedded rail systems relying on adhesive components to secure the rail.
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 6: Prüfverfahren für die Beständigkeit gegen extreme Umwelteinflüsse (ISO 22074-6:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 6: Méthode d'essai pour la détermination de résistance aux conditions environnementales sévères (ISO 22074-6:2021)
Le présent document spécifie une procédure d'essai en laboratoire pour déterminer l'effet de l'exposition à des conditions environnementales sévères sur le système de fixation.
Cette procédure d'essai s'applique à un système de fixation complet, y compris un rail enrobé avec fixations mécaniques. Elle ne s'applique pas aux systèmes de rails enrobés qui s'appuient sur des composants adhésifs pour fixer le rail.
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 6. del: Preskusna metoda za odpornost na izredne okoljske razmere (ISO 22074-6:2021)
Ta dokument določa laboratorijski preskusni postopek za ugotavljanje učinka izpostavljenosti izrednim okoljskim razmeram na pritrdilni sistem.
Ta preskusni postopek se uporablja za celoten pritrdilni sestav, vključno z vgrajeno tirnico z mehanskim pritrjevanjem. Ne uporablja se za sisteme za vgrajene tirnice, ki uporabljajo lepilne komponente za pritrjevanje tirnice.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22074-6:2024
01-maj-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 6. del: Preskusna metoda
za odpornost na izredne okoljske razmere (ISO 22074-6:2021)
Railway infrastructure - Rail fastening systems - Part 6: Test method for resistance to
severe environmental conditions (ISO 22074-6:2021)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 6: Prüfverfahren für die
Beständigkeit gegen extreme Umwelteinflüsse (ISO 22074-6:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 6: Méthode d'essai pour la
détermination de résistance aux conditions environnementales sévères (ISO 22074-
6:2021)
Ta slovenski standard je istoveten z: EN ISO 22074-6:2024
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN ISO 22074-6:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22074-6:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 22074-6:2024
EN ISO 22074-6
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 45.080
English Version
Railway infrastructure - Rail fastening systems - Part 6:
Test method for resistance to severe environmental
conditions (ISO 22074-6:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail Bahninfrastruktur - Schienenbefestigungssysteme -
- Partie 6: Méthode d'essai pour la détermination de Teil 6: Prüfverfahren für die Beständigkeit gegen
résistance aux conditions environnementales sévères extreme Umwelteinflüsse (ISO 22074-6:2021)
(ISO 22074-6:2021)
This European Standard was approved by CEN on 23 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22074-6:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22074-6:2024
EN ISO 22074-6:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22074-6:2024
EN ISO 22074-6:2024 (E)
European foreword
The text of ISO 22074-6:2021 has been prepared by Technical Committee ISO/TC 269 “Railway
applications” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22074-6:2024 by Technical Committee CEN/TC 256 “Railway applications” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slov
...
SLOVENSKI STANDARD
oSIST prEN ISO 22074-6:2024
01-februar-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 6. del: Preskusna metoda
za odpornost na izredne okoljske razmere (ISO 22074-6:2021)
Railway infrastructure - Rail fastening systems - Part 6: Test method for resistance to
severe environmental conditions (ISO 22074-6:2021)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 6: Prüfverfahren für die
Beständigkeit gegen extreme Umwelteinflüsse (ISO 22074-6:2021)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 6: Méthode d'essai pour la
détermination de résistance aux conditions environnementales sévères (ISO 22074-
6:2021)
Ta slovenski standard je istoveten z: prEN ISO 22074-6
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
oSIST prEN ISO 22074-6:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 22074-6:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22074-6:2024
INTERNATIONAL ISO
STANDARD 22074-6
First edition
2021-03
Railway infrastructure — Rail
fastening systems —
Part 6:
Test method for resistance to severe
environmental conditions
Infrastructure ferroviaire — Systèmes de fixation du rail —
Partie 6: Méthode d'essai pour la détermination de résistance aux
conditions environnementales sévères
Reference number
ISO 22074-6:2021(E)
©
ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22074-6:2024
ISO 22074-6:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22074-6:2024
ISO 22074-6:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test specimens. 2
7 Procedure. 2
8 Test report . 2
© ISO 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 22074-6:2024
ISO 22074-6:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that comm
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.