SIST EN 60317-61:2012

Specifications for particular types of winding wires - Part 61: Polyester glass fibres wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

This part of IEC 60317 specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 180.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 61: Flachdrähte aus Kupfer, blank oder lackisoliert und umhüllt mit Polyesterglasgewebe, imprägniert mit Harz oder Lack oder unimprägniert, Temperaturindex 180

Spécifications pour types particuliers de fils de bobinage - Partie 61: Fil de section rectangulaire en cuivre nu ou émaillé, guipé de fibres de verre polyester imprégnées de vernis ou de résine, d'indice de température 180

La CEI 60317-61:2012 spécifie les exigences relatives au fil de bobinage en cuivre nu ou émaillé, guipé de fibres de verre avec polyester, imprégnées de vernis ou de résine, d'indice de température 180. La gamme des dimensions nominales des conducteurs couverte par la présente norme est:  - largeur: min. 2,0 mm; max. 16,0 mm;  - épaisseur: min. 0,80 mm; max. 5,60 mm. Mots clé: fil de bobinage en cuivre

Specifikacije za posebne vrste navijalnih žic - 61. del: Navita poliestrska steklena vlakna s smolo ali prevleko, impregnirano ali neimpregnirano, gola ali emajlirana pravokotna bakrena žica, toplotni indeks 180

Ta del standarda IEC 60317 določa zahteve za bakreno žico, navito s poliestrskimi steklenimi vlakni, impregnirano, golo ali emajlirano pravokotno bakreno žico, toplotni indeks 180.

General Information

• Status: Withdrawn
• Publication Date: 25-Oct-2012
• Withdrawal Date: 04-Jul-2023
• ICS: 29.060.10 - Wires
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-Jul-2023
• Due Date: 28-Jul-2023
• Completion Date: 05-Jul-2023
• Ref Project: EN 60317-61:2012 - Specifications for particular types of winding wires - Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

Relations

• Replaced By: SIST EN IEC 60317-61:2020 - Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 30-Jun-2020
• Revised: SIST EN IEC 60317-61:2020 - Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
• Effective Date: 31-Jul-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-61:2012
01-december-2012
Specifikacije za posebne vrste navijalnih žic - 61. del: Navita poliestrska steklena
vlakna s smolo ali prevleko, impregnirano ali neimpregnirano, gola ali emajlirana
pravokotna bakrena žica, toplotni indeks 180
Specifications for particular types of winding wires - Part 61: Polyester glass fibres
wound resin or varnish impregnated, bare or enamelled rectangular copper wire,
temperature index 180
Spécifications pour types particuliers de fils de bobinage - Partie 61: Fil de section
rectangulaire en cuivre nu ou émaillé, guipé de fibres de verre polyester imprégnées de
vernis ou de résine, d'indice de température 180
Ta slovenski standard je istoveten z: EN 60317-61:2012
ICS:
29.060.10 Žice Wires
SIST EN 60317-61:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-61:2012

---------------------- Page: 2 ----------------------

SIST EN 60317-61:2012

EUROPEAN STANDARD
EN 60317-61

NORME EUROPÉENNE
September 2012
EUROPÄISCHE NORM

ICS 29.060.10


English version


Specifications for particular types of winding wires -
Part 61: Polyester glass fibre wound, minimum class 180,
resin or varnish impregnated, bare or enamelled rectangular copper wire,
temperature index 180
(IEC 60317-61:2012)


Spécifications pour types particuliers  Technische Lieferbedingungen für
de fils de bobinage - bestimmte Typen von Wickeldrähten -
Partie 61: Fil de section rectangulaire Teil 61: Flachdrähte aus Kupfer, blank
en cuivre nu ou émaillé, guipé de fibres oder lackisoliert und umhüllt mit
de verre avec polyester de classe Polyesterglasgewebe, imprägniert
d’au moins 180, imprégnées de vernis mit Harz oder Lack oder unimprägniert,
ou de résine, d'indice de température 180 Temperaturindex 180
(CEI 60317-61:2012) (IEC 60317-61:2012)



This European Standard was approved by CENELEC on 2012-08-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-61:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60317-61:2012
EN 60317-61:2012 - 2 -
Foreword
The text of document 55/1322/FDIS, future edition 1 of IEC 60317-61, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60317-61:2012.
The following dates are fixed:
(dop) 2013-05-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This standard is to be read in conjunction with EN 60317-0-8:2012.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 60317-61:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60264 Series NOTE Harmonised as EN 60264 Series (not modified).
IEC 60317 Series NOTE Harmonised as EN 60317 Series (not modified).
IEC 60851 Series NOTE Harmonised as EN 60851 Series (not modified).

---------------------- Page: 4 ----------------------

SIST EN 60317-61:2012
- 3 - EN 60317-61:2012
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60317-0-8 2012 Specifications for particular types EN 60317-0-8 2012
of winding wires -
Part 0-8: General requirements - Polyester
glass fibre wound, resin or varnish
impregnated or not impregnated, bare
or enamelled rectangular copper wire

---------------------- Page: 5 ----------------------

SIST EN 60317-61:2012

---------------------- Page: 6 ----------------------

SIST EN 60317-61:2012



IEC 60317-61

®


Edition 1.0 2012-07




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Specifications for particular types of winding wires –

Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish

impregnated, bare or enamelled rectangular copper wire, temperature index 180




Spécifications pour types particuliers de fils de bobinage –

Partie 61: Fil de section rectangulaire en cuivre nu ou émaillé, guipé de fibres


de verre avec polyester de classe d’au moins 180, imprégnées de vernis ou de

résine, d'indice de température 180












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX K


ICS 29.060.10 ISBN 978-2-83220-188-6



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60317-61:2012
– 2 – 60317-61 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and general notes and appearance . 6
3.1 Terms and definitions . 6
3.2 General notes . 6
3.2.1 Methods of test . 6
3.2.2 Winding wire . 7
3.3 Appearance . 7
4 Dimensions . 7
5 Electrical resistance . 7
6 Elongation . 7
7 Springiness . 7
8 Flexibility and adherence . 7
9 Heat shock . 7
10 Cut-through . 8
11 Resistance to abrasion . 8
12 Resistance to solvents . 8
13 Breakdown voltage . 8
14 Continuity of insulation . 8
15 Temperature index . 8
16 Resistance to refrigerants . 8
17 Solderability . 8
18 Heat or solvent bonding . 8
19 Dielectric dissipation factor .
...