SIST EN 13674-1:2011/kFprA1:2016

Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above

The same as for EN 13674-1:2011.

Bahnanwendungen - Oberbau - Schienen - Teil 1: Vignolschienen ab 46 kg/m

Applications ferroviaires - Voie - Rails - Partie 1: Rails Vignole de masse supérieure ou égale à 46kg/m

Železniške naprave - Zgornji ustroj - Tirnica - 1. del: Vignolove tirnice z maso 46 kg/m in več

General Information

• Status: Not Published
• Public Enquiry End Date: 09-Jul-2015
• ICS: 45.080 - Rails and railway components
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 08-Oct-2019
• Due Date: 13-Oct-2019
• Completion Date: 08-Oct-2019
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: EN 13674-1:2011/FprA1 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above

Relations

• Consolidated By: SIST EN 13674-1:2011+A1:2017 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
• Effective Date: 18-Jan-2023
• Amends: SIST EN 13674-1:2011 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
• Effective Date: 01-Jun-2015
• Consolidated By: SIST EN 13674-1:2011+A1:2017 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 13674-1:2011+A1:2017 - Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
• Effective Date: 07-Dec-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13674-1:2011/oprA1:2015
01-junij-2015
äHOH]QLãNHQDSUDYH=JRUQMLXVWURM7LUQLFDGHO9LJQRORYHWLUQLFH]PDVR
NJPLQYHþ
Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above
Bahnanwendungen - Oberbau - Schienen - Teil 1: Vignolschienen ab 46 kg/m
Applications ferroviaires - Voie - Rails - Partie 1: Rails Vignole de masse supérieure ou
égale à 46kg/m
Ta slovenski standard je istoveten z: EN 13674-1:2011/prA1
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
SIST EN 13674-1:2011/oprA1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13674-1:2011/oprA1:2015

---------------------- Page: 2 ----------------------

SIST EN 13674-1:2011/oprA1:2015

EUROPEAN STANDARD
DRAFT
EN 13674-1:2011
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
March 2015
ICS 93.100
English Version
Railway applications - Track - Rail - Part 1: Vignole railway rails
46 kg/m and above
Applications ferroviaires - Voie - Rails - Partie 1: Rails Bahnanwendungen - Oberbau - Schienen - Teil 1:
Vignole de masse supérieure ou égale à 46kg/m Vignolschienen ab 46 kg/m
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 13674-1:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13674-1:2011/prA1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Contents Page
Foreword .3
1 Modification to Clause 2, Normative references .4
2 Modification to Clause 7, Manufacture .4
3 Modifications to Clause 8, Qualifying tests .4
4 Modifications to Clause 9, Acceptance tests .4
5 Modifications to Annex A .5
6 Modifications to Annex E . 11
7 Modifications to Annex F . 12

2

---------------------- Page: 4 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Foreword
This document (EN 13674-1:2011/prA1:2015) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
3

---------------------- Page: 5 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
1 Modification to Clause 2, Normative references
Delete reference to EN 10247.
2 Modification to Clause 7, Manufacture
7.4.2
Add the following note after the first paragraph:
"NOTE 1 A rail can display different indications of position of the rail in the bloom (A,B…Y) along its length."
The existing note below becomes "NOTE 2".
3 Modifications to Clause 8, Qualifying tests
8.4.4
Replace “0,001 35” with “0,00135”.
8.7.2
Second paragraph: Delete «and a maximum number of 200 heats » after “The predictive equations shall be
produced from a minimum number of 100 heats”.
8.8
At the end of the first paragraph, replace "five heats" with "three heats".
4 Modifications to Clause 9, Acceptance tests
9.1.3.2 Table 5a) Chemical composition and mechanical properties
Change the min. required elongation A to min. "8" instead of "9" in the last line of the table (column Elongation
A min %).
9.1.6
Change the first sentence from "Samples shall be prepared and assessed in accordance with EN 10247" to
“Samples shall be prepared and assessed in accordance with Annex F."
9.1.8
th
5 paragraph, replace "0,4" with "0,3" to read:
"HBW > HBW + 0,3 (HBW – HBW )"
2 3 1 3
Change the last sentence before Table 6 and replace "ground" with "removed" to read:
“0,5 mm shall be removed from the rail running surface before a hardness impression is made.”
4

---------------------- Page: 6 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
9.2.2
Table 8 – Straightness, surface flatness and twist tolerances:
Add a footnote f at line “ends”, column “Class A, L”, vertical straightness to read:
f
"e ≤ 0,2 mm"
At the very end of the table add:
“f dimension is measured under the 2 m straight edge.”
9.4.1.2
Table 9 – Drilling and cutting tolerances
a
Add a new footnote b after "Length ".
The new footnote b shall read the following:
b
" These tolerances apply only for rails with fishplate holes, not for rails with handling holes."
9.4.2.3
Last paragraph, remove "or proved" at the end of the following sentence:
"No more than three defects within a length of 10 m of rail and, over the whole length, a maximum of one
defect per 10 m rail length shall be dressed or proved".
5 Modifications to Annex A
Table A.1 – List of profiles and previous rail profiles
Insert new profile 54E6 and add it to Table A.1, no "previous profile name" in the following way:
"
A.20 54E6
"
A.20 becomes A.21, A.21 becomes A.22, A.22 becomes A.23, A.23 becomes A.24.
5

---------------------- Page: 7 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Replace Figure A.7 "Rail profile 49E5" with the following:
"


"
6

---------------------- Page: 8 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Replace Figure A.15 "Rail profile 54E1" with the following:
"


"
7

---------------------- Page: 9 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Replace Figure A.18 "Rail profile 54E4" with the following:
"

"
8

---------------------- Page: 10 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Add the following new Figure A.20 "Rail profile 54E6":
"

"
9

---------------------- Page: 11 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Add the following new Figure A.24 (previous Figure A.23) "Rail profile 60E2":
"

"
10

---------------------- Page: 12 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)

Table A.2 – Rail transition references (see Figure A.24)
In the title replace "(See Figure A.24)" with ("See Figure A.25").
Insert the following line:
"
54E6 46,31 67,00 13,40 12,00 107,16 92,25 66,04 34,97 12,02 1,54 25,36 7,30 0,69
"
6 Modifications to Annex E
Figure E.2 - Datum references for decision
Replace key 4,5 with:
"4, 5 - height of fishplating - must be within ± limits"
Figure E.8 - Fishing height
Replace the keys with:
"1 HF = fishing height (see Figure E.1) and
2 h3 = theoretical"
Figure E.11 - Foot toe thickness
Replace former Figure E.11 with the following new one:

11

---------------------- Page: 13 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
"

"
7 Modifications to Annex F
Insert the following new Annex F:
"
12

---------------------- Page: 14 ----------------------

SIST EN 13674-1:2011/oprA1:2015
EN 13674-1:2011/prA1:2015 (E)
Annex F
(normative)

Microscopic examination of rail steels using standard diagrams to
assess the content of non-metallic inclusions
F.1 General
F.1.1 Degree of purity
The degree of purity (index K3) is a value indicating the content of non-metallic inclusions in the form of oxides
inclusions in the product. The K3 index is a value indicating the content of such oxides by the determination of
the percentage area of non-metallic inclusions in the structure, i.e. the sum obtained by counting inclusions
weighted according to their area, starting from a specified size of inclusion upwards, and referred to an area of
1 000 mm².
F.1.2 Standard diagram plate No. 1
The standard diagram plate No. 1 is a set of diagra
...