SIST EN 1870-1:2007/kprA1:2008

Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws

Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 1: Tischkreissägemaschinen (mit und ohne Schiebetisch), Formatkreissägemaschinen und Baustellenkreissägemaschinen

Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 1: Scies circulaires à table de menuisier (avec ou sans table mobile), scies au format et scies de chantier

Varnost lesnoobdelovalnih strojev - Krožne žage - 1. del: Delovne mize (s podajalno mizo ali brez nje), žage za rezanje na mero in žage na gradbišču

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Oct-2008
• ICS: 25.080.60 - Sawing machines
• ICS: 79.120.10 - Woodworking machines
• Technical Committee: VSN - Safety of machinery
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 29-Aug-2012
• Due Date: 03-Sep-2012
• Completion Date: 29-Aug-2012
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 1870-1:2007/prA1 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws

Relations

• Revised: SIST EN 1870-1:2007 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
• Effective Date: 01-Oct-2008
• Consolidated By: SIST EN 1870-1:2007+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 1870-1:2007+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 1870-1:2007+A1:2009 - Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
• Effective Date: 01-Apr-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1870-1:2007/kprA1:2008
01-oktober-2008
9DUQRVWOHVQRREGHORYDOQLKVWURMHY.URåQHåDJHGHO'HORYQHPL]HV
SRGDMDOQRPL]RDOLEUH]QMHåDJH]DUH]DQMHQDPHURLQåDJHQDJUDGELãþX
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw
benches (with and without sliding table), dimension saws and building site saws
Sicherheit von Holzbearbeitungsmaschinen - Kreissägemaschinen - Teil 1:
Tischkreissägemaschinen (mit und ohne Schiebetisch), Formatkreissägemaschinen und
Baustellenkreissägemaschinen
Sécurité des machines pour le travail du bois - Machines à scier circulaires - Partie 1:
Scies circulaires à table de menuisier (avec ou sans table mobile), scies au format et
scies de chantier
Ta slovenski standard je istoveten z: EN 1870-1:2007/prA1
ICS:
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 1870-1:2007/kprA1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1870-1:2007/kprA1:2008

---------------------- Page: 2 ----------------------

SIST EN 1870-1:2007/kprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 1870-1:2007
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2008
ICS 79.120.10

English Version
Safety of woodworking machines - Circular sawing machines -
Part 1: Circular saw benches (with and without sliding table),
dimension saws and building site saws
Sécurité des machines pour le travail du bois - Machines à Sicherheit von Holzbearbeitungsmaschinen -
scier circulaires - Partie 1: Scies circulaires à table de Kreissägemaschinen - Teil 1: Tischkreissägemaschinen
menuisier (avec ou sans table mobile), scies au format et (mit und ohne Schiebetisch), Formatkreissägemaschinen
scies de chantier und Baustellenkreissägemaschinen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 142.
This draft amendment A1, if approved, will modify the European Standard EN 1870-1:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1870-1:2007/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1870-1:2007/kprA1:2008
EN 1870-1:2007/prA1:2008 (E)
Contents Page
Foreword.3
1 Modification to the Foreword .4
2 Modification to 5.4.5, Ergonomics and handling.4
3 Modification to 6.2.1, Marking of the machine.4
4 Modification to 6.3, Instruction handbook .4
5 Modification to Annex ZA .4
6 Addition of Annex ZB .5

2

---------------------- Page: 4 ----------------------

SIST EN 1870-1:2007/kprA1:2008
EN 1870-1:2007/prA1:2008 (E)
Foreword
This document (EN 1870-1:2007/prA1:2008) has been prepared by Technical Committee CEN/TC 142
“Woodworking machines - Safety”, the secretariat of which is held by UNI.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of the Machinery Directive.
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.

3

---------------------- Page: 5 ----------------------

SIST EN 1870-1:2007/kprA1:2008
EN 1870-1:2007/prA1:2008 (E)
1 Modification to the Foreword
Replace the fifth paragraph with the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.".
2 Modification to 5.4.5, Ergonomics and handling
After the last but one paragraph, add: "Circular saw benches, dimension saws and building site saws
components with a mass exceeding 25 kg shall include necessary attachments to accommodate the fitting of
a lifting device e.g. lugs positioned such as to avoid their overturn or fall or move in an uncon
...