SIST EN ISO 22074-8:2024
(Main)Railway infrastructure - Rail fastening systems - Part 8: Test method for vertical stiffness (ISO 22074-8:2022)
Railway infrastructure - Rail fastening systems - Part 8: Test method for vertical stiffness (ISO 22074-8:2022)
This document specifies laboratory test procedures to determine the static and low-frequency dynamic
stiffness of rail pads, baseplate pads and complete rail fastening assemblies.
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 8: Bestimmung der vertikalen Steifigkeiten (ISO 22074-8:2022)
Dieses Dokument legt Laborprüfverfahren für die Bestimmung der statischen und dynamischen Steifigkeit bei niedriger Frequenz von Zwischenlagen, Zwischenplatten und vollständigen Schienenbefestigungssystemen fest.
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 8: Méthode d'essai de la raideur verticale (ISO 22074-8:2022)
Le présent document spécifie les modes opératoires des essais en laboratoire dont l'objectif est de déterminer la raideur statique et la raideur dynamique à basse fréquence des semelles sous rail, des semelles sous selle ainsi que des systèmes de fixation complets.
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 8. del: Preskusna metoda za navpično togost (ISO 22074-8:2022)
Ta dokument določa laboratorijski preskusni postopek za ugotavljanje statične in nizkofrekvenčne dinamične
togosti tirničnih vložkov, vložkov osnovne plošče in celih pritrdilnih sestavov za tirnice.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22074-8:2024
01-maj-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 8. del: Preskusna metoda
za navpično togost (ISO 22074-8:2022)
Railway infrastructure - Rail fastening systems - Part 8: Test method for vertical stiffness
(ISO 22074-8:2022)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 8: Bestimmung der vertikalen
Steifigkeiten (ISO 22074-8:2022)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 8: Méthode d'essai de la
raideur verticale (ISO 22074-8:2022)
Ta slovenski standard je istoveten z: EN ISO 22074-8:2024
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN ISO 22074-8:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22074-8:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 22074-8:2024
EN ISO 22074-8
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 45.080
English Version
Railway infrastructure - Rail fastening systems - Part 8:
Test method for vertical stiffness (ISO 22074-8:2022)
Infrastructure ferroviaire - Systèmes de fixation du rail Bahninfrastruktur - Schienenbefestigungssysteme -
- Partie 8: Méthode d'essai de la raideur verticale (ISO Teil 8: Bestimmung der vertikalen Steifigkeiten (ISO
22074-8:2022) 22074-8:2022)
This European Standard was approved by CEN on 23 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22074-8:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22074-8:2024
EN ISO 22074-8:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22074-8:2024
EN ISO 22074-8:2024 (E)
European foreword
The text of ISO 22074-8:2022 has been prepared by Technical Committee ISO/TC 269 “Railway
applications” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22074-8:2024 by Technical Committee CEN/TC 256 “Railway applications” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 22074-8:2022 has been approved by CEN as EN ISO 22074-8:2024 without any
modification.
3
---------------------- Pa
...
SLOVENSKI STANDARD
oSIST prEN ISO 22074-8:2024
01-februar-2024
Železniška infrastruktura - Sistemi za pritrjevanje tirnic - 8. del: Preskusna metoda
za navpično togost (ISO 22074-8:2022)
Railway infrastructure - Rail fastening systems - Part 8: Test method for vertical stiffness
(ISO 22074-8:2022)
Bahninfrastruktur - Schienenbefestigungssysteme - Teil 8: Bestimmung der vertikalen
Steifigkeiten (ISO 22074-8:2022)
Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 8: Méthode d'essai de la
raideur verticale (ISO 22074-8:2022)
Ta slovenski standard je istoveten z: prEN ISO 22074-8
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
oSIST prEN ISO 22074-8:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 22074-8:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 22074-8:2024
INTERNATIONAL ISO
STANDARD 22074-8
First edition
2022-02
Railway infrastructure — Rail
fastening systems —
Part 8:
Test method for vertical stiffness
Infrastructure ferroviaire — Systèmes de fixation du rail —
Partie 8: Méthode d'essai de la raideur verticale
Reference number
ISO 22074-8:2022(E)
© ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 22074-8:2024
ISO 22074-8:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 22074-8:2024
ISO 22074-8:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols . 2
5 Verification of calibration .2
6 Test procedures for pads.3
6.1 Static test procedure for pads . 3
6.1.1 Principle . 3
6.1.2 Apparatus . 3
6.1.3 Procedure . 4
6.1.4 Test report . 5
6.2 Low-frequency dynamic test
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.