LED modules for general lighting - Safety specifications (IEC 62031:2008)

This International Standard specifies general and safety requirements for light-emitting diode (LED) modules: - LED modules without integral control gear for operation under constant voltage, constant current or constant power; - self-ballasted LED modules for use on d.c. supplies up to 250 V or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz.

LED-Module für Allgemeinbeleuchtung - Sicherheitsanforderungen (IEC 62031:2008)

Modules de DEL pour éclairage général - Spécifications de sécurité (CEI 62031:2008)

La présente Norme internationale spécifie les exigences générales et les exigences de sécurité relatives aux modules de diodes électroluminescentes (DEL):  - modules de DEL sans appareillage d'alimentation intégré pour fonctionnement sous tension constante, courant constant ou puissance constante;  - modules de DEL à ballast intégré pour utilisation sur des alimentations à courant continu jusqu'à 250 V ou à courant alternatif 50 Hz ou 60 Hz jusqu'à 1 000 V.

Moduli LED za splošno razsvetljavo - Varnostne specifikacije (IEC 62031:2008)

Ta mednarodni standard določa splošne in varnostne zahteve za module z organskimi svetlečimi diodami (LED): – module LED brez vgrajene kontrolne naprave za delovanje pod konstantno napetostjo, tokom in močjo; – module LED z vgrajeno predstikalno napravo, ki uporabljajo napajalnike z enosmerno napetostjo do 250 V ali izmenično napetostjo do 1000 V s frekvenco 50 Hz ali 60 Hz.

General Information

Status
Withdrawn
Publication Date
13-Oct-2008
Withdrawal Date
05-Jan-2023
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Jan-2023
Due Date
29-Jan-2023
Completion Date
06-Jan-2023

Relations

Buy Standard

Standard
SIST EN 62031:2008
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62031:2008
01-december-2008
Moduli LED za splošno razsvetljavo - Varnostne specifikacije (IEC 62031:2008)
LED modules for general lighting - Safety specifications (IEC 62031:2008)
LED-Module für Allgemeinbeleuchtung - Sicherheitsanforderungen (IEC 62031:2008)

Modules de DEL pour éclairage général - Spécifications de sécurité (CEI 62031:2008)

Ta slovenski standard je istoveten z: EN 62031:2008
ICS:
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 62031:2008 en,fr

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62031:2008
---------------------- Page: 2 ----------------------
SIST EN 62031:2008
EUROPEAN STANDARD
EN 62031
NORME EUROPÉENNE
September 2008
EUROPÄISCHE NORM
ICS 29.140.99; 31.080.99
English version
LED modules for general lighting -
Safety specifications
(IEC 62031:2008)
Modules de DEL pour éclairage général - LED-Module für Allgemeinbeleuchtung -
Spécifications de sécurité Sicherheitsanforderungen
(CEI 62031:2008) (IEC 62031:2008)

This European Standard was approved by CENELEC on 2008-07-01. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the

Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62031:2008 E
---------------------- Page: 3 ----------------------
SIST EN 62031:2008
EN 62031:2008 - 2 -
Foreword

The text of document 34A/1237/FDIS, future edition 1 of IEC 62031, prepared by SC 34A, Lamps, of

IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was

approved by CENELEC as EN 62031 on 2008-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-07-01
NOTE In this standard, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of the International Standard IEC 62031:2008 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60968 NOTE Harmonized as EN 60968:1990 (modified).
IEC 62384 NOTE Harmonized as EN 62384:2006 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 62031:2008
- 3 - EN 62031:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
Publication Year Title EN/HD Year
IEC 60598-1 (mod) 2003 Luminaires - EN 60598-1 2004
Part 1: General requirements and tests + corr. August 2007
A1 2006 A1 2006
1) 2)
IEC 60838-2-2 - Miscellaneous lampholders - EN 60838-2-2 2006
Part 2-2: Particular requirements - Connectors
for LED modules
IEC 61347-1 (mod) 2007 Lamp controlgear - EN 61347-1 2008
Part 1: General and safety requirements
IEC 61347-2-13 2006 Lamp controlgear - EN 61347-2-13 2006
Part 2-13: Particular requirements for d.c. or
a.c. supplied electronic controlgear for LED
modules
IEC 62471 (mod) 2006 Photobiological safety of lamps and lamp EN 62471 2008
systems
ISO 4046-4 2002 Paper, board, pulps and related terms - - -
Vocabulary -
Part 4: Paper and board grades and
converted products
Undated reference.
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 62031:2008
---------------------- Page: 6 ----------------------
SIST EN 62031:2008
IEC 62031
Edition 1.0 2008-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
LED modules for general lighting – Safety specifications
Modules de DEL pour éclairage général – Spécifications de sécurité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX
ICS 29.140.99 ; 31.080.99 ISBN 2-8318-9503-0
---------------------- Page: 7 ----------------------
SIST EN 62031:2008
– 2 – 62031 © IEC:2008
CONTENTS

FOREWORD...........................................................................................................................3

INTRODUCTION.....................................................................................................................5

1 Scope...............................................................................................................................6

2 Normative references .......................................................................................................6

3 Terms and definitions .......................................................................................................7

4 General requirements .......................................................................................................8

5 General test requirements ................................................................................................8

6 Classification....................................................................................................................9

7 Marking ............................................................................................................................9

7.1 Mandatory marking for built-in or independent modules...........................................9

7.2 Location of marking ...............................................................................................10

7.3 Durability and legibility of marking .........................................................................10

8 Terminals .......................................................................................................................10

9 Provisions for protective earthing ...................................................................................10

10 Protection against accidental contact with live parts .......................................................10

11 Moisture resistance and insulation..................................................................................10

12 Electric strength .............................................................................................................10

13 Fault conditions ..............................................................................................................11

13.1 General .................................................................................................................11

13.2 Overpower condition .............................................................................................11

14 Conformity testing during manufacture ...........................................................................11

15 Construction ...................................................................................................................11

16 Creepage distances and clearances ...............................................................................11

17 Screws, current-carrying parts and connections..............................................................11

18 Resistance to heat, fire and tracking...............................................................................12

19 Resistance to corrosion ..................................................................................................12

Annex A (normative) Tests...................................................................................................13

Annex B (informative) Overview of systems composed of LED modules and control

gear ......................................................................................................................................14

Annex C (informative) Conformity testing during manufacture ..............................................15

Bibliography..........................................................................................................................16

Figure B.1 – Overview of systems composed of LED modules and control gear ....................14

---------------------- Page: 8 ----------------------
SIST EN 62031:2008
62031 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
LED MODULES FOR GENERAL LIGHTING –
SAFETY SPECIFICATIONS
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any

equipment declared to be in conformity with an IEC Publication.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62031 has been prepared by subcommittee 34A: Lamps, of IEC

technical committee 34: Lamps and related equipment.
The text of this first edition is based on the following documents:
FDIS Report on voting
34A/1237/FDIS 34A/1256/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------
SIST EN 62031:2008
– 4 – 62031 © IEC:2008
NOTE In this standard, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.

The committee has decided that the contents of this publication will remain unchanged until

the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in

the data related to the specific publication. At this date, the publication will be

• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN 62031:2008
62031 © IEC:2008 – 5 –
INTRODUCTION

The first edition of a safety standard for LED modules for general lighting applications

acknowledges the need for relevant tests for this new source of electrical light, sometimes

called “solid state lighting”.

The provisions in the standard represent the technical knowledge of experts from the fields of

the semiconductor industry and those of the traditional electrical light sources.

Two types of LED modules are covered: with integral and external control gear.
---------------------- Page: 11 ----------------------
SIST EN 62031:2008
– 6 – 62031 © IEC:2008
LED MODULES FOR GENERAL LIGHTING –
SAFETY SPECIFICATIONS
1 Scope

This International Standard specifies general and safety requirements for light-emitting diode

(LED) modules:

٭ LED modules without integral control gear for operation under constant voltage, constant

curr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.