iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60073:2001

(Main)

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indication devices and actuators

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indication devices and actuators

Establishes general rules for assigning particular meanings to certain visual, acoustsic and tactile indications. Has the status of a basic safety publication in accordance with IEC Guide 104.

Grund- und Sicherheitsregeln für die Mensch-Maschine-Schnittstelle, Kennzeichnung - Codierungsgrundsätze für Anzeigengeräte und Bedienteile

Principes fondamentaux et de sécurité pour les interfaces homme-machines, le marquage et l'identification - Principes de codage pour les dispositifs indicateurs et les organes de commande

Etablit des règles générales en vue d'attribuer une signification particulière à certaines indications visuelles, acoustiques et tactiles. A le statut d'une publication fondamentale de sécurité conformément au Guide 104

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indication devices and actuators

General Information

Status
Withdrawn
Publication Date
31-Aug-2001
Withdrawal Date
30-Jun-2005
ICS
13.110 - Safety of machinery
29.020 - Electrical engineering in general
Technical Committee
ETC - Electrotechnical technical committe
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2005
Due Date
01-Jul-2005
Completion Date
01-Jul-2005
Ref Project
EN 60073:1996 - Basic and safety principles for man-machine interface, marking and identification - Coding principles for indication devices and actuators

Relations

Replaced By
SIST EN 60073:2003 - Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
Effective Date
06-May-2014
Replaced By
SIST EN 60073:2003 - Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
Effective Date
07-Jun-2022
Replaced By
SIST EN 60073:2003 - Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
Effective Date
28-Jan-2023

Buy Standard

EN 60073:2001EN 60073:2001
PreviousNext
Standard
EN 60073:2001
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60073:2001
01-september-2001
Basic and safety principles for man-machine interface, marking and identification -
Coding principles for indication devices and actuators
Basic and safety principles for man-machine interface, marking and identification -
Coding principles for indication devices and actuators
Grund- und Sicherheitsregeln für die Mensch-Maschine-Schnittstelle, Kennzeichnung -
Codierungsgrundsätze für Anzeigengeräte und Bedienteile
Principes fondamentaux et de sécurité pour les interfaces homme-machines, le
marquage et l'identification - Principes de codage pour les dispositifs indicateurs et les
organes de commande
Ta slovenski standard je istoveten z: EN 60073:1996
ICS:
13.110 Varnost strojev Safety of machinery
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 60073:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60073:2001

---------------------- Page: 2 ----------------------

SIST EN 60073:2001

---------------------- Page: 3 ----------------------

SIST EN 60073:2001

---------------------- Page: 4 ----------------------

SIST EN 60073:2001

---------------------- Page: 5 ----------------------

SIST EN 60073:2001

---------------------- Page: 6 ----------------------

SIST EN 60073:2001

---------------------- Page: 7 ----------------------

SIST EN 60073:2001

---------------------- Page: 8 ----------------------

SIST EN 60073:2001

---------------------- Page: 9 ----------------------

SIST EN 60073:2001

---------------------- Page: 10 ----------------------

SIST EN 60073:2001

---------------------- Page: 11 ----------------------

SIST EN 60073:2001

---------------------- Page: 12 ----------------------

SIST EN 60
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60445:2021(Main)
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors (IEC 60445:2021)
EN IEC 60445:2021

This document applies to the identification and marking of terminals of electrical equipment
such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever
applicable, to combinations of such equipment (e.g. assemblies), and it also applies to the
identification of terminations of certain designated conductors. It also provides general rules for
the use of certain colours or alphanumeric notations to identify conductors with the aim of
avoiding ambiguity and ensuring safe operation. These conductor colours and alphanumeric
notations are intended to be applied on cores, busbars, and electrical equipment, and in cables
or installations.
This basic safety publication focusing on safety essential requirements is primarily intended for
use by technical committees in the preparation of standards in accordance with the principles
laid down in IEC Guide 104 and ISO/IEC Guide 51.
It is not intended for use by manufacturers or certification bodies. One of the responsibilities of
a technical committee is, wherever applicable, to make use of basic safety publications in the
preparation of its publications. The requirements of this basic safety publication will not apply
unless specifically referred to or included in the relevant publications.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62745:2017/A11:2020(Amendment)
Safety of machinery - Requirements for cableless control systems of machinery
EN 62745:2017/A11:2020

IEC 62745:2017(E) specifies requirements for the functionality and interfacing of cableless (for example, radio, infra-red) control systems that provide communication between operator control station(s) and the control system of a machine. Specific requirements are included for such operator control stations that are portable by the operator.

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60204-1:2018(Main)
Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:2016 , modified)
EN 60204-1:2018

This part of IEC 60204 applies to electrical, electronic and programmable electronic
equipment and systems to machines not portable by hand while working, including a group of
machines working together in a co-ordinated manner.
NOTE 1 This part of IEC 60204 is an application standard and is not intended to limit or inhibit technological
advancement.
NOTE 2 In this part of IEC 60204, the term “electrical” includes electrical, electronic and programmable electronic
matters (i.e. “electrical equipment” means electrical, electronic and programmable electronic equipment).
NOTE 3 In the context of this part of IEC 60204, the term “person” refers to any individual and includes those
persons who are assigned and instructed by the user or his agent(s) in the use and care of the machine in
question.
The equipment covered by this part of IEC 60204 commences at the point of connection of the
supply to the electrical equipment of the machine (see 5.1).
NOTE 4 The requirements for the electrical supply installation are given in the IEC 60364 series.
This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical
equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating
current (AC) and not exceeding 1 500 V for direct current (DC), and with nominal supply
frequencies not exceeding 200 Hz.
NOTE 5 Information on electrical equipment or parts of the electrical equipment that operate with higher nominal
supply voltages can be found in IEC 60204-11.
This part of IEC 60204 does not cover all the requirements (for example guarding,
interlocking, or control) that are needed or required by other standards or regulations in order
to protect persons from hazards other than electrical hazards. Each type of machine has
unique requirements to be accommodated to provide adequate safety.
This part of IEC 60204 specifically includes, but is not limited to, the electrical equipment of
machines as defined in 3.1.40.
NOTE 6 Annex C lists examples of machines whose electrical equipment can be covered by this part of
IEC 60204.
This part of IEC 60204 does not specify additional and special requirements that can apply to
the electrical equipment of machines that, for example:
– are intended for use in open air (i.e. outside buildings or other protective structures);
– use, process, or produce potentially explosive material (for example paint or sawdust);
– are intended for use in potentially explosive and/or flammable atmospheres;
– have special risks when producing or using certain materials;
– are intended for use in mines;
– are sewing machines, units, and systems (which are covered by IEC 60204-31);
– are hoisting machines (which are covered by IEC 60204-32);
– are semiconductor fabrication equipment (which are covered by IEC 60204-33).
Power circuits where electrical energy is directly used as a working tool are excluded from
this part of IEC 60204.

  • Standard
    150 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    150 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    150 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60073:2003(Main)
Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 60073:2002

Establishes general rules for assigning particular meanings to certain visual, acoustsic and tactile indications. Has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    35 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60204-1:2018/oprA1:2021(Amendment)
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 60204-1:2018/prA1:2020

Not available

  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60204-32:2023(Main)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
FprEN IEC 60204-32:2023

This part of IEC 60204 applies to electrical, electronic, programmable electronic equipment and systems to hoisting machines and related equipment, including a group of hoisting machines working together in a co-ordinated manner
NOTE 1 In this part of IEC 60204, the term "electrical" includes both electrical and electronic matters (i.e. "electrical equipment" means both the electrical, electronic and programmable electronic equipment).
NOTE 2 In the context of this part of IEC 60204, the term “person” refers to any individual and includes those persons who are assigned and instructed by the user or user’s agent(s) in the use and care of the hoisting machine in question.
The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the hoisting machine (crane-supply-switch) and includes systems for power supply and control feeders situated outside of the hoisting machine, for example, flexible cables or conductor wires or conductor bars (see Figure 3).
NOTE 3 The requirements for the electrical supply installation of electrical equipment of a hoisting machine are given in IEC 60364.
This standard is applicable to equipment or parts of equipment not exceeding 1 000 V AC or 1 500 V DC between lines and with nominal frequencies not exceeding 200 Hz.
NOTE 4 Special requirements for electrical equipment of hoisting machines intended to be operated at higher voltages, see IEC 60204-11 (Annex D)
This part of IEC60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of hoisting machine has unique requirements to be accommodated to provide adequate safety. This part of 60204 doesn´t cover noise risks and vibration risks.
Additional and special requirements can apply to the electrical equipment of hoisting machines including those that
- handle or transport potentially explosive material (e.g. paint or sawdust);
- are intended for use in potentially explosive and/or flammable atmospheres;
- have special risks when transporting or moving certain materials
- are intended for use in mines.
For the purposes of this standard, hoisting machines include cranes of all types, winches of all types and storage and retrieval machines. The following product groups are included:
- overhead travelling cranes;
- mobile cranes;
- tower cranes;
- slewing luffing cranes;
- gantry cranes;
- offshore cranes;
- floating cranes;
- winches of all types;
- hoists and accessories;
- loader cranes;
- cable cranes;
- load holding devices;
- storage and retrieval machines;
- monorail hoists;
- straddle carriers;
- rubber tyred gantry cranes (RTGs).
NOTE 5 Definition of the different crane types see ISO 4306-1
This standard does not cover individual items of electrical equipment other than their selection for use and their erection.

  • Draft
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18473-4:2023(Main)
Functional pigments and extenders for special applications - Part 4: Nanoscale titanium dioxide for photocatalytic application (ISO 18473-4:2022)
EN ISO 18473-4:2023

This document specifies requirements and corresponding test methods for nanoscale titanium dioxide (TiO2) in either powder or suspension form for photocatalytic application.
This document is applicable to modified nanoscale titanium dioxide for photocatalytic application. Such modification can be surface treatment, coating, doping and combination thereof.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day