SIST EN 60749-11:2004

Semiconductor devices - Mechanical and climatic test methods -- Part 11: Rapid change of temperature - Two-fluid-bath method

Defines the rapid change of temperature test method and the two-fluid-bath method. This test method may also be used, employing fewer cycles, to test the effect of immersion in heated liquids that are used for the purpose of cleaning devices. This test is applicable to all semiconductor devices. It is considered destructive unless otherwise detailed in the relevant specification.

Halbleiterbauelemente - Mechanische und klimatische Prüfverfahren -- Teil 11: Rascher Temperaturwechsel - Zweibäderverfahren

Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques -- Partie 11: Variations rapides de température - Méthode des deux bains

Définit la méthode d'essai de variations rapides de température et la méthode des deux bains. Cette dernière méthode d'essai peut égale-ment être utilisée, en appliquant moins de cycles, pour déterminer l'effet de l'immersion dans des liquides chauds qui est utilisée pour le nettoyage des dispositifs. Cet essai est applicable à tous les dispositifs à semiconducteurs. Il est considéré comme destructif, sauf stipulation contraire dans la spécification applicable.

Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method (IEC 60749-11:2002)

General Information

• Status: Published
• Publication Date: 30-Jun-2004
• ICS: 31.080.01 - Semiconductor devices in general
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2004
• Due Date: 01-Jul-2004
• Completion Date: 01-Jul-2004
• Ref Project: EN 60749-11:2002 - Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method

Relations

• Replaces: SIST EN 60749:2002 + A1:2002 - Semiconductor devices - Mechanical and climatic test methods
• Effective Date: 29-Jan-2023
• Revised: SIST EN 60749:2002 + A1:2002 - Semiconductor devices - Mechanical and climatic test methods
• Effective Date: 13-May-2010
• Replaces: SIST EN 60749:2002 + A1:2002 - Semiconductor devices - Mechanical and climatic test methods
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN 60749-11:2004

STANDARD
julij 2004
Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid
change of temperature - Two-fluid-bath method (IEC 60749-11:2002)
ICS 31.080.01 Referenčna številka
SIST EN 60749-11:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60749-11
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2002
ICS 31.080.01 Partly supersedes EN 60749:1999 + A1:2000 + A2:2001
English version
Semiconductor devices -
Mechanical and climatic test methods
Part 11: Rapid change of temperature -
Two-fluid-bath method
(IEC 60749-11:2002)
Dispositifs à semiconducteurs - Halbleiterbauelemente -
Méthodes d'essais mécaniques Mechanische und klimatische
et climatiques Prüfverfahren
Partie 11: Variations rapides Teil 11: Rascher Temperaturwechsel -
de température - Zweibäderverfahren
Méthode des deux bains (IEC 60749-11:2002)
(CEI 60749-11:2002)
This European Standard was approved by CENELEC on 2002-07-02. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60749-11:2002 E

---------------------- Page: 2 ----------------------

EN 60749-11:2002 - 2 -
Foreword
The text of document 47/1605/FDIS, future edition 1 of IEC 60749-11, prepared by IEC TC 47,
Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60749-11 on 2002-07-02.
This mechanical and climatic test method, as it relates to rapid change of temperature and two-fluid-bath
method, is a complete rewrite of the test contained in 1.2, chapter 3 of EN 60749:1999.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-07-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60749-11:2002 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60749-11:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60749-3 - Semiconductor devices - Mechanical EN 60749-3 2002
and climatic test methods
Part 3: External visual examination
3)
IEC 60068-2-14 1984 Environmental testing EN 60068-2-14 1999
Part 2: Tests - Test N: Change of
temperature

1)
Undated reference.
2)
Valid edition at date of issue.
3)
EN 60068-2-14 includes A1:1986 to IEC 60068-2-14.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
60749-11
INTERNATIONAL
Première édition
STANDARD
First edition
2002-04
Dispositifs à semiconducteurs –
Méthodes d'essais mécaniques et climatiques –
Partie 11:
Variations rapides de température –
Méthode des deux bains
Semiconductor devices –
Mechanical and climatic test methods –
Part 11:
Rapid change of temperature –
Two-fluid-bath method
 IEC 2002 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
G
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60749-11  IEC:2002 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
MECHANICAL AND CLIMATIC TEST METHODS –
Part 11: Rapid change of temperature –
Two-fluid-bath method
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60749-11 has been prepared by IEC technical committee 47:
Semiconductor devices.
The text of this standard is based on the following documents:
FDIS Report on voting
47/1605/FDIS 47/1621/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This mechanical and climatic test method, as it relates to rapid change of temperature and
two-fluid-bath method, is a complete rewrite of the test contained in 1.2, chapter 3 of
IEC 60749.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
The committee has decided that the contents of this publication will remain unchanged
until 2007. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
The co
...