SIST EN 1673:2002+A1:2010
(Main)Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
This standard specifies safety and hygiene requirements for the design and manufacture of rotary rack ovens with one or more rotary racks. These ovens are used in the food industry and shops (bakeries, pastry-making, etc.) for the batch baking of foodstuffs containing flour, water and other additives. This standard applies to ovens used only for food products except for those containing volatile flammable ingredients. The control of the humidity of the air in the baking chamber is by the production and introduction of steam around normal atmospheric pressure. The following machines are excluded: - experimental and testing machines under development by the manufacturer; - domestic appliances. This standard covers the technical safety requirements for the transport, installation, operation, cleaning and maintenance of these machines (see 5.2 and 5.3 of EN 12100-1:2003)." This document deals with all significant hazards, hazardous situations and events relevant to rotary rack ovens, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Noise is not considered to be a significant hazard. This does not mean that the manufacturer is absolved from reducing noise and making a noise declaration. Therefore a noise test code is given in Annex B. The hazards from the use of gaseous fuel by gas appliances are not covered by this standard. This standard is not applicable to rotary rack ovens which are manufactured before the date of its publication as EN.
Nahrungsmittelmaschinen - Stikken-Backöfen - Sicherheits- und Hygieneanforderungen
Machines pour les produits alimentaires - Fours à chariot rotatif - Prescriptions relatives à la sécurité et l'hygiène
La présente norme spécifie les prescriptions de sécurité et d'hygiène relatives à la conception et à la fabrication
des fours à un ou plusieurs chariots rotatifs.
Ces fours sont utilisés dans l'industrie alimentaire et les commerces de l'alimentation (boulangeries, pâtisseries, etc.)
pour la cuisson non continue de produits alimentaires contenant de la farine, de l'eau et d'autres additifs. Cette norme
s'applique aux fours utilisés exclusivement pour des produits alimentaires, à l'exception de ceux qui contiennent
des ingrédients volatils inflammables.
La régulation de l'humidité de l'air dans la chambre de cuisson est obtenue par la production et l'introduction
de vapeur d'eau sous une pression très voisine de la pression atmosphérique normale.
Les machines suivantes sont exclues de la présente norme :
- machines expérimentales et d'essais en cours de mise au point par le fabricant ;
- appareils à usage domestique.
!La présente norme couvre les prescriptions techniques de sécurité relatives au transport, à l’installation,
au fonctionnement, au nettoyage et à la maintenance de ces machines (voir 5.2 et 5.3 de l’EN 12100-1:2003).
Le présent document traite de tous les phénomènes, situations et événements dangereux significatifs spécifiques
aux fours à chariot rotatif, lorsqu'ils sont utilisés normalement et dans des conditions de mauvaise utilisation
raisonnablement prévisibles par le fabricant (voir Article 4).
Le bruit n’est pas considéré comme un phénomène dangereux significatif. Ceci ne signifie pas que le fabricant de la
machine est dispensé de réduire le bruit et d'établir une déclaration de bruit. Par conséquent, un code d'essai
acoustique est donné en Annexe B."
Les risques dus à l'utilisation de combustibles gazeux dans des appareils à gaz ne sont pas couverts par cette norme.
!La présente norme n’est pas applicable aux fours à chariot rotatif fabriqués avant sa date de publication en tant
que Norme européenne."
Stroji za predelavo hrane - Peči z vrtljivim vozičkom - Varnostne in higienske zahteve
Ta standard določa varnostne in higienske zahteve za načrtovanje in izdelavo peči z vrtljivim vozičkom z enim ali več vrtljivimi vozički. Te peči se uporabljajo v prehrambeni industriji in trgovinah (pekarne, izdelava peciv itd.) za serijsko peko živil, ki vsebujejo moko, vodo in ostale dodatke. Ta standard velja za pečice, ki se uporabljajo samo za živila, razen tistih, ki vsebujejo hlapne gorljive sestavine. Nadzor vlažnosti zraka v komori, v kateri se peče, je v proizvodnji in uvedbi pare pri normalnem atmosferskem pritisku. Izvzeti so naslednji stroji: - eksperimentalni in preskusni stroji, ki jih razvija proizvajalec; - gospodinjski aparati. Ta standard zajema tehnične zahteve glede varnosti za prevoz, namestitev, delovanje, čiščenje in vzdrževanje teh strojev (glej 5.2 in 5.3 EN ISO 12100-1:2003). Ta evropski standard obravnava vse velike nevarnosti, nevarne situacije in primere, ki se tičejo peči z vrtljivim vozičkom, kadar se uporabljajo, kot je predvideno, in pod pogoji napačne uporabe, ki jih razumno predvidi proizvajalec (glej Klavzulo 4). Hrup ne šteje kot velika nevarnost. To ne pomeni, da je proizvajalec oproščen zmanjševanja hrupa in priprave deklaracije o hrupu. Zato je preskusna koda hrupa podana v Dodatku B. Nevarnosti zaradi uporabe plinastega goriva v plinskih napravah niso zajete v tem standardu. Ta standard ne velja za pečice z vrtljivim vozičkom, ki so izdelane pred datumom objave v obliki EN.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DKWHYHNahrungsmittelmaschinen - Stikken-Backöfen - Sicherheits- und HygieneanforderungenMachines pour les produits alimentaires - Fours à chariot rotatif - Prescriptions relatives à la sécurité et l'hygièneFood processing machinery - Rotary rack ovens - Safety and hygiene requirements97.040.20Cooking ranges, working tables, ovens and similar appliances67.260Tovarne in oprema za živilsko industrijoPlants and equipment for the food industryICS:Ta slovenski standard je istoveten z:EN 1673:2000+A1:2009SIST EN 1673:2002+A1:2010en,fr01-marec-2010SIST EN 1673:2002+A1:2010SLOVENSKI
STANDARD
SIST EN 1673:2002+A1:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1673:2000+A1
December 2009 ICS 67.260; 97.040.20 Supersedes EN 1673:2000English Version
Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
Machines pour les produits alimentaires - Fours à chariot rotatif - Prescriptions relatives à la sécurité et l'hygiène
Nahrungsmittelmaschinen - Stikken-Backöfen - Sicherheits- und Hygieneanforderungen This European Standard was approved by CEN on 11 June 2000 and includes Amendment 1 approved by CEN on 24 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1673:2000+A1:2009: ESIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 2 Contents Page Foreword .3Introduction .31Scope .32Normative references .43Description .54!!!!List of significant hazards"""" .74.2Mechanical hazards .74.3Electrical hazards .84.4Thermal hazards .84.5Explosion and fire hazards .84.6Hazard from being trapped inside .84.7Hazard generated by neglecting hygienic design principles .84.8Hazards generated by neglecting ergonomic principles .85!!!!Safety and hygiene requirements and/or protective measures"""" .85.2Mechanical hazards .95.3!!!!Electrical hazards"""". 115.4Thermal hazards . 125.5Fire hazards due to overheating . 135.6Hazard from being trapped inside . 135.7Hygiene requirements . 135.8Hazards generated by neglecting ergonomic principles . 146Verification of the safety and hygiene requirements and/or measures . 147Information for use . 15Annex A (normative)
Principles of design to ensure the cleanability of rotary rack ovens . 17A.1!!!!Terms and definitions"""" . 17A.2Materials of construction . 17A.3Design . 18Annex B (normative)
Noise test code - Grade 2 of accuracy. 35B.1!!!!Terms and definitions"""" . 35B.2Installation and mounting conditions . 35B.3Operating conditions . 35B.4Measurements . 35B.5Emission sound pressure level determination . 35B.6Sound power level determination . 36B.7Measurement uncertainties . 36B.8Information to be recorded . 36B.9Information to be reported . 36B.10Declaration and verification of noise emission values . 37Annex ZA (informative)
!!!!Relationship between this European Standard and the
Essential Requirements of EU Directive 98/37/EC"""" . 39Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 40!!!!Bibliography"""" . 41 SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 3 Foreword This document (EN 1673:2000+A1:2009) has been prepared by Technical Committee CEN/TC 153 "Machinery intended for use with foodstuffs and feed", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 24 October 2009. This document supersedes EN 1673:2000. The start and finish of text introduced or altered by amendment is indicated in the text by tags
!". This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Introduction !This European Standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extend to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard." 1 Scope This standard specifies safety and hygiene requirements for the design and manufacture of rotary rack ovens with one or more rotary racks. SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 4 These ovens are used in the food industry and shops (bakeries, pastry-making, etc.) for the batch baking of foodstuffs containing flour, water and other additives. This standard applies to ovens used only for food products except for those containing volatile flammable ingredients. The control of the humidity of the air in the baking chamber is by the production and introduction of steam around normal atmospheric pressure. The following machines are excluded:
experimental and testing machines under development by the manufacturer; domestic appliances. !This standard covers the technical safety requirements for the transport, installation, operation, cleaning and maintenance of these machines (see 5.2 and 5.3 of EN 12100-1:2003)." This document deals with all significant hazards, hazardous situations and events relevant to rotary rack ovens, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). Noise is not considered to be a significant hazard. This does not mean that the manufacturer is absolved from reducing noise and making a noise declaration. Therefore a noise test code is given in Annex B." The hazards from the use of gaseous fuel by gas appliances are not covered by this standard. !This standard is not applicable to rotary rack ovens which are manufactured before the date of its publication as EN." 2 !!!!Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distances to prevent danger zones being reached by the upper limbs EN 614-1:2006, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 953:1997, Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery — Safety related parts of control systems — Part 1: General principles for design EN 1088:1995, Safety of machinery — Interlocking devices associated with guards — Principles for design and selection EN 1672-2:2005, Food processing machinery — Basic concepts — Part 2: Hygiene requirements EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General requirements (IEC 60204:2005, modified) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IEC 60529:1989) SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 5 EN ISO 3743-1:1995, Acoustics — Determination of sound levels of noise sources — Engineering methods for small, movable sources in reverberant fields — Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane
(ISO 3744:1994) EN ISO 4287:1998, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters (ISO 4287:1997) EN ISO 4871:1996, Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 11688-1:1998, Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12001:1996, Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code (ISO 12001:1996) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13732-1:2008, Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006) EN ISO 13849-1:2008, Safety of machinery — Safety related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006)" 3 Description A rotary rack oven usually consists of the following parts (see figure.1): a) container built with insulated panels; b) baking chamber with access door; c) heat production unit; d) hot air circulation system; e) rack and trays; f) drive unit for rack rotation; g) steam generator; h) steam extractor; i) control panel; SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 6 j) miscellaneous devices (e.g. combustion product flue where gas or fuel fired); k) device to hold the removable rotary racks.
Figure 1 — Parts of a rotary rack oven SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 7
4 !!!!List of significant hazards 4.1 General This clause contains all the significant hazards, hazardous situations and events, as far as they are dealt with in this Standard, identified by risk assessment as significant for this type of machinery, and which require action to eliminate or reduce the risk." 4.2 Mechanical hazards The significant mechanical hazards are: shearing hazard; trapping hazard; impact hazard; loss of stability. The example in figure 2 shows the danger zones: Zone 1: rotation of the rack inside the oven
hazards of shearing, trapping, impact; Zone 2: drive mechanism
hazards of shearing, trapping; Zone 3: space between the rack and the door frame
hazards of shearing, trapping, impact; All zones: sharp corners and edges on touchable parts hazards of cutting.
Figure 2 — Danger zones of a rotary rack oven SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 8 There is also a hazard relating to loss of stability of the trays and of the rack during rotation and on entering the baking chamber. 4.3 Electrical hazards Hazard of electric shock from direct or indirect contact with live components. Hazard of external influences on electrical equipment (e.g. cleaning with water). 4.4 Thermal hazards 4.4.1 Escape of steam from the baking chamber on opening the door creates a hazard of burns. 4.4.2 High temperature of external parts and hand operated components creates a hazard of burns. 4.5 Explosion and fire hazards 4.5.1 Overpressure of steam inside the baking chamber creates a hazard of explosion. 4.5.1.1 The use in the oven of combustible substances (for example sugar) can create a hazard of fire. 4.5.1.2 Improper operation of control and adjustment components of the combustion equipment can create a hazard of overheating of the oven and of fire. 4.6 Hazard from being trapped inside Hazard of burns and suffocation. 4.7 Hazard generated by neglecting hygienic design principles The neglecting of hygienic principles can create unacceptable modification of foodstuff and therefore a risk to human health, i.e. through physical, chemical or microbial pollution. 4.8 Hazards generated by neglecting ergonomic principles During loading and unloading racks, cleaning and maintenance, there is a risk of injury or chronic damage to the body resulting from awkward body postures, heavy lifting, pushing and pulling. 5 !!!!Safety and hygiene requirements and/or protective measures"""" 5.1 !!!!General Machinery shall comply with the safety requirements and/or protective measures of this clause.
In addition, the machine shall be designed according to the principles of EN ISO 12100-2 for relevant but not significant hazards, which are not dealt with by this document. For hazards which are to be reduced by the application of the type B-standards such as EN 294, EN 614-1, EN 953, EN 954-1, EN 1088, EN 60204-1, EN 60529, EN ISO 12100 and EN ISO 13849-1, the manufacturer shall carry out a risk assessment to establish the requirements of the type B-standard. This specific risk assessment shall be part of the general risk assessment of the machine. Interlocking guards shall be at least interlocking without guard locking as defined in EN 1088:1995, 4.2.1 and they shall comply with EN 1088:1995, Clauses 5 and 6. SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 9 The safety related devices and their interface with the control systems shall meet at least category 1 of 6.2.2 of EN 954-1:1996 or present at least a performance level c defined in accordance with EN ISO 13849-1:2006. When fixed guards, or parts of the machine acting as such, are not permanently fixed e. g. by welding, their fixing systems shall remain attached to the guards or to the machinery when the guards are removed." 5.2 Mechanical hazards 5.2.1 !!!!Zone 1: Rotation of the rack inside the oven"""" Where reference is made to interlocking devices throughout clause 5, they shall comply with clause 4.3.1 and clauses 5 and 6 of EN 1088:1995. Safety related control systems be to category 1 of EN 954-1:1996. !deleted text" If the force required to stop the rotating rack is greater than or equal to 150 N, access to the baking chamber, while the rack is rotating, shall be prevented by an interlocking door (e.g. using a rotary cam operated switch). Opening the door shall cause the rack to stop within 3 s. Any operation which requires the rack to rotate under power, with the door open, shall be controlled by a hold-to-run control. 5.2.3 Zone 2: Drive mechanism If the sum of distances from the floor to danger point is less than 2,5 m, access to the external transmission shall be prevented by fixed guards in accordance with EN 953 : 1997. 5.2.4 Zone 3: Space between the rack and the door frame Means shall be provided to prevent hand injury when moving the rack in and out of the oven. Since the movement is manual and controlled by the operator, this may be achieved by providing a clearance of 50 mm between the rack and the sides of the door frame. 5.2.5 All zones - External surfaces and edges !External rough surfaces and sharp edges on the oven shall be avoided in accordance with 4.2.1 of EN ISO 12100-2:2003." 5.2.6 Loss of stability 5.2.6.1 Stability of the rack during the rotation To prevent overturning of the rack during rotation and engagement/disengagement of the drive, one of the solutions shown as examples in figure 3 may be adopted. Other technical solutions giving the same level of safety level are also permitted. In figure 3 b), the rack is manually pushed onto the rotation system lifting hook and then lifted off the ground. The rack shall remain stable during rotation on the oven floor. This may be achieved by a coupling at its axis of rotation or by other means.
SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 10
Figure 3 a) — Rotating platform with ramp Figure 3 b) — Rotating system lift hook The rack is manually pushed onto the rotating platform. The rack is manually engaged and lifted onto the rotating system.
Figure 3 c) — Automatic lifting unit The rack is manually engaged onto the lifting system and automatically lifted when the door is closed. Figure 3 - Examples of rotary rack coupling systems
SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 11 5.2.6.2 Stability of the rack entering the baking chamber To prevent the rack overturning on entering the oven a ramp or other suitable device shall be provided if the difference in level exceeds 10 mm. 5.2.6.3 Stability of the rack The rack shall be stable when titled 10° from the horizontal plane in the most unfavourable position. 5.2.6.4 Stability of the trays When trays are supplied by the manufacturer, the design shall prevent accidental displacement of the trays, especially during loading and unloading of the oven. If the slope of the floor is over 10 degrees, trays shall be secured in the rack. When trays are not supplied by the manufacturers, these requirements shall be described in the instruction handbook. 5.3 !!!!Electrical hazards 5.3.1 General The electrical equipment shall comply with EN 60204-1:2006. Electrical equipment, for example switches, that may be exposed to water, e. g. during cleaning, shall be protected to an appropriate IP rating according to EN 60529 and EN 60204-1. 5.3.2 Safety requirements related to electromagnetic phenomena
The machines shall have sufficient immunity to electromagnetic disturbances to enable them to operate safely as intended and not fail to danger when exposed to the levels and types of disturbances intended by the manufacturer. The manufacturer of the machines shall design, install and wire the equipment and sub-assemblies taking into account the recommendations of the suppliers of these sub-assemblies. 5.3.3 Protection against electric shock The electrical equipment shall comply with Clause 6 of EN 60204-1:2006. 5.3.4 Power circuits Devices for detection and interruption of over-current shall be applied to each live conductor in compliance with 7.2.3 of EN 60204-1:2006. In case of single phase machines, no such device is required for the earthed neutral conductor. 5.3.5 Protection against earth faults in control circuits For machinery supplied from a single-phase conductor and an earthed neutral conductor, there is no requirement for double pole interruption of the control circuit. The single pole interruption shall be in the phase conductor (see 9.4.3.1 of EN 60204-1:2006). SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 12
5.3.6 Emergency stop Machines shall be fitted with at least one emergency stop (see 10.7 of EN 60204-1:2006), as far as the risk assessment carried out by the manufacturer doesn't allow to establish that such a device would not reduce the stopping time, or would not enable the special measures, required to deal with the risk, to be taken. In general no emergency stop is required for rotary rack ovens. In this case particular attention shall be given to the accessibility of the normal OFF switch from the operator position. 5.3.7 Motor enclosures Where a motor has a degree of protection lower than IP23 (see EN 60529:1991) it shall be mounted inside an enclosure (see 14.2 of EN 60204-1:2006) that guarantees a minimum degree of protection of IP23 (see
EN 60529:1991)." 5.4 Thermal hazards 5.4.1 Escape of steam Escape of steam shall be prevented by suitable means, for example by an extractor when opening the door. A special warning on an indelible plate, that cannot be removed, shall be affixed to the front of the door stating that "the door shall be opened with care". When opening the door of the baking chamber: the extractor shall be switched on automatically; the water feeding device to produce steam, if it is automatic, shall be switched off automatically; the air circulation inside the oven shall be switched off automatically. 5.4.2 Hot external surfaces To prevent injury from hot external surfaces, the oven shall be provided with insulation so that the temperature of front metal surfaces does not exceed the 70 °C according to !EN ISO 13732-1:2006", 10 minutes after the door is closed. 5.4.3 Manual controls External crank handles, handles and similar manual controls which in ordinary use are held in the hand for up to 3 s, shall not exceed the temperature limit value of 65 °C for an uncoated metal handle. For other materials, see !EN ISO 13732-1:2006". SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 13 5.5 Fire hazards due to overheating 5.5.1 To prevent overheating of the oven, it shall be controlled by a temperature regulator and by an independent thermostat which prevents the temperature in the baking chamber exceeding 400 °C. 5.5.2 To prevent overpressure inside the baking chamber, a device shall be provided to operate the steam discharge valves (flaps) before opening the door. Such a pressure relief valve shall vent to a safe area e.g. above the oven. 5.6 Hazard from being trapped inside To prevent any person becoming trapped inside the oven, any door of height greater than 80 cm, shall be provided with an opening device on the inside face which require a force no greater than 125 N to operate it. The door shall be provided with a window with transparent material to allow vision inside the oven. When using glass or plastic these shall withstand a temperature of at least 300 °C. 5.7 Hygiene requirements 5.7.1 !General Rotary ovens shall be designed and manufactured in accordance with EN 1672-2:2005 and Annex A. Examples of the 3 hygiene zones, as defined in EN 1672-2:2005, are given in Figure 4." 5.7.2 Food area The food area is as follows: the trays; but not rack, wheels or castors. 5.7.3 Splash area The splash area is as follows: the inside face of the access door; the opening handles of the door; the rack. 5.7.4 Non food area The rest of the oven, including the wheels or the castors of the rack, does not come into contact with the food.
SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 14
. . . . . . . . . . . . . . . . . . .
Food area
Splash area
Non food area Figure 4 a) Figure 4b) Figure 4 — Hygiene areas
Insulation material shall be enclosed by steel plates or other material of similar strength which prevent insects and vermin from entering. 5.8 Hazards generated by neglecting ergonomic principles Awkward body postures during operation, cleaning and maintenance shall be avoided by design. Pushing and pulling with excessive effort shall be avoided e.g. by use of low-friction castor wheels or by the design of the rack coupling mechanism. The force required to hook and to unhook the rack shall be no greater than 150 N. Object with a mass of more than 100 kg shall not be manually handled. To avoid this, for example, an automatic lifting unit may be used. Control devices shall be positioned to allow the operator to reach them as stated in annex A of !EN 614-1:2006". 6 Verification of the safety and hygiene requirements and/or measures !This clause contains the methods of testing for the presence and adequacy of the safety requirements stated in Clause 5. All safety measures of Clause 5 contain self-evidence criteria of acceptance. Verification of the requirements can be made by means of inspection, calculation or testing. These shall be applied to a machine in a fully commissioned condition but partial dismantling may be necessary for the purpose of some checks. Such partial dismantling shall not invalidate the result of verification. Methods of verification are given in Table 1. SIST EN 1673:2002+A1:2010
EN 1673:2000+A1:2009 (E) 15 Table 1 Relevant subclause Method of verification 5.2.1 By operation of the hold-to-run control and by measurement of time and force 5.2.2 5.2.3 By measurement and visual inspection 5.2.4 By visual inspection 5.2.5 By functional test 5.2.5.3 By test : when titled 10°, the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.