SIST-TS CEN/TS 81-11:2010
(Main)Safety rules for the construction and installation of lifts - Basics and interpretations - Part 11: Interpretations related to EN 81 family of standards
Safety rules for the construction and installation of lifts - Basics and interpretations - Part 11: Interpretations related to EN 81 family of standards
This Technical Specification is a collection of interpretations related to the EN 81 family of standards (see CEN/TR 81-10:2008). As first issue, this document collects interpretation to EN 81-1:1998, EN 81-2:1998, EN 81-28:2003, EN 81-70:2003 and EN 81-72:2003.
Interpretations to other standards of the EN 81 family will be added when they are available.
Interpretations aim to improve the understanding of the clause(s) they are referring to and by that facilitating common understanding between manufacturers, lift installers, notified bodies, inspection bodies and national authorities.
Interpretations do not have the same status as the standards to which they are related. However, the application of interpretations should give to the interested parties confidence that the relevant standard has not been wrongly applied.
Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Grundlagen und Auslegungen - Teil 11: Auslegungen zur Normenreihe EN 81
Diese Technische Spezifikation ist eine Zusammenstellung von Auslegungen, die sich auf die Normenreihe
EN 81 beziehen (siehe CEN/TR 81-10:2008). In einem ersten Schritt enthält dieses Dokument Auslegungen
zu EN 81-1:1998, EN 81-2:1998, EN 81-28:2003, EN 81-70:2003 und EN 81-72:2003.
Auslegungen zu anderen Normen der Normenreihe EN 81 werden aufgenommen, sobald sie zur Verfügung
stehen.
Auslegungen dienen dazu, das Verständnis der Abschnitte, auf die sie sich beziehen, zu verbessern und
dadurch ein gemeinsames Verständnis zwischen Herstellern, Montagebetrieben, Benannten Stellen,
Überwachungsstellen und nationalen Behörden zu erleichtern.
Auslegungen haben nicht den gleichen Status wie die Normen, auf die sie sich beziehen. Die Anwendung von
Auslegungen gibt den beteiligten Kreisen jedoch die Sicherheit, dass die entsprechende Norm nicht falsch
angewendet worden ist.
Règles de sécurité pour la construction et l'installation des élévateurs - Fondamentaux et interprétations - Partie 11 : Interprétations relatives aux normes de la famille EN 81
Cette Spécification Technique constitue un recueil d'interprétations relatives à la famille des normes EN 81 (voir le CEN/TR 81-10:2008). En tant que première publication, ce document regroupe les interprétations à l’EN 81-1:1998, à l’EN 81-2:1998, à l’EN 81-28:2003, à l’EN 81-70:2003 et à l’EN 81-72:2003.
Les interprétations aux autres normes de la famille EN 81 seront ajoutées au fur et à mesure de leur disponibilité.
Les interprétations ont pour objectif d'améliorer la compréhension de l'(des) article(s) auquel(auxquels) elles font référence et de ce fait, de faciliter une compréhension commune entre les fabricants, les installateurs d'ascenseurs, les organismes notifiés, les organismes de contrôle et les autorités nationales.
Les interprétations n'ont pas le même statut que les normes auxquelles elles se réfèrent. Cependant, l'application des interprétations devrait donner l'assurance aux parties intéressées que la norme concernée n'a pas été appliquée de façon erronée.
Varnostna pravila za konstruiranje in vgradnjo dvigal (liftov) - Osnove in razlaga - 11. del: Razlaga v zvezi s standardi družine EN 81
Ta tehnična specifikacija je zbirka razlag, povezanih z družino standardov EN 81 (glej CEN/TR 81-10:2008). V prvi izdaji tega dokumenta so zbrane razlage EN 81-1:1998, EN 81-2:1998, EN 81- 28:2003, EN 81-70:2003 in EN 81-72:2003. Razlage drugih standardov družine EN 81 se bodo dodajale, ko bodo na voljo. Razlage so namenjene boljšemu razumevanju klavzul, na katere se sklicujejo, s čimer se poveča splošno razumevanje med proizvajalci, monterji dvigal, priglašenimi organi, nadzornimi organi in nacionalnimi organi. Razlage nimajo enakega statusa kot standardi, s katerimi so povezane. Uporaba razlag bi morala zainteresiranim stranem dati zaupanje, da ustrezni standard ni bil napačno uporabljen.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 81-11:2010
01-oktober-2010
1DGRPHãþD
SIST-TS CEN/TS 81-29:2005
Varnostna pravila za konstruiranje in vgradnjo dvigal (liftov) - Osnove in razlaga -
11. del: Razlaga v zvezi s standardi družine EN 81
Safety rules for the construction and installation of lifts - Basics and interpretations - Part
11: Interpretations related to EN 81 family of standards
Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Grundlagen und
Auslegungen - Teil 11: Auslegungen zur Normenreihe EN 81
Règles de sécurité pour la construction et l'installation des élévateurs - Fondamentaux et
interprétations - Partie 11 : Interprétations relatives aux normes de la famille EN 81
Ta slovenski standard je istoveten z: CEN/TS 81-11:2009
ICS:
91.140.90 'YLJDOD7HNRþHVWRSQLFH Lifts. Escalators
SIST-TS CEN/TS 81-11:2010 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 81-11:2010
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 81-11:2010
TECHNICAL SPECIFICATION
CEN/TS 81-11
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
July 2009
ICS 91.140.90 Supersedes CEN/TS 81-29:2004
English Version
Safety rules for the construction and installation of lifts - Basics
and interpretations - Part 11: Interpretations related to EN 81
family of standards
Règles de sécurité pour la construction et l'installation des Sicherheitsregeln für die Konstruktion und den Einbau von
élévateurs - Fondamentaux et interprétations - Partie 11 : Aufzügen - Grundlagen und Auslegungen - Teil 11:
Interprétations relatives aux normes de la famille EN 81 Auslegungen zur Normenreihe EN 81
This Technical Specification (CEN/TS) was approved by CEN on 23 May 2009 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 81-11:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Contents
Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 List of interpretations . 5
3.1 Interpretations pertaining to EN 81-1:1998 and EN 81-2:1998 . 5
3.2 Interpretations pertaining to EN 81-28:2003 . 15
3.3 Interpretations pertaining to EN 81-70:2003 . 15
3.4 Interpretations pertaining to EN 81-72:2003 . 16
4 Interpretations . 17
4.1 For EN 81-1 and EN 81-2 . 17
4.2 For EN 81-28 . 17
4.3 For EN 81-70 . 17
4.4 For EN 81-72 . 18
Section 4.1 - Interpretations related to EN 81-1 and EN 81-2 . 19
Section 4.2 - Interpretations related to EN 81-28 . 105
Section 4.3 - Interpretations related to EN 81-70 . 106
Section 4.4 - Interpretations related to EN 81-72 . 113
Annex A (normative) List of interpretations pertaining to previous editions of EN 81-1 and EN 81-2 still
valid for EN 81-1/2:1998 . 128
Bibliography . 136
2
---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Foreword
This document (CEN/TS 81-11:2009) has been prepared by Technical Committee CEN/TC 10 “Lifts, escalators
and moving walks”, the secretariat of which is held by AFNOR.
CEN members are free to choose the way in which they implement this CEN Technical Specification.
CEN members are also asked to inform their national committee(s) about this CEN Technical Specification, and
make it available on request.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This CEN Technical Specification supersedes CEN/TS 81-29:2004.
This document is a collection of interpretations related to the EN 81 family of standards. For the time being this
collection of interpretations relates to the following standards: EN 81-1, EN 81-2, EN 81-28, EN 81-70 and
EN 81-72. According to the progress in working out interpretations, this document will be amended and/or
completed.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Introduction
Standards reflect the consensus of the best European expertise and are prepared with highest care. Product
standards cannot be formulated in such a way that they describe all possible technical solutions and therefore
exclude all uncertainties regarding the understanding of the required provisions. On the other hand technology is in
a permanent evolution, the progress of which cannot be incorporated into standards quickly enough.
Interpretations are a practical way to give:
a) answers to questions regarding the understanding of clauses in standards;
b) feedback to the CEN-Committee responsible for a standard about the practical experiences resulting from
the use of the standard;
c) guidance to further development and improvement of standards following:
1) experience, especially accidents and incidents;
2) progress in technology;
3) state of the art.
Information concerning the procedure developed by CEN/TC 10 concerning the elaboration of interpretations is
shown in CEN Technical Report CEN/TR 81-10.
4
---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
1 Scope
This Technical Specification is a collection of interpretations related to the EN 81 family of standards (see
CEN/TR 81-10:2008). As first issue, this document collects interpretation to EN 81-1:1998, EN 81-2:1998, EN 81-
28:2003, EN 81-70:2003 and EN 81-72:2003.
Interpretations to other standards of the EN 81 family will be added when they are available.
Interpretations aim to improve the understanding of the clause(s) they are referring to and by that facilitating
common understanding between manufacturers, lift installers, notified bodies, inspection bodies and national
authorities.
Interpretations do not have the same status as the standards to which they are related. However, the application of
interpretations should give to the interested parties confidence that the relevant standard has not been wrongly
applied.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 81-1:1998, Safety rules for the construction and installation of lifts − Part 1: Electric lifts
EN 81-2:1998, Safety rules for the construction and installation of lifts − Part 2: Hydraulic lifts
EN 81-28:2003, Safety rules for the construction and installation of lifts – Lifts for the transport of persons and
goods – Part 28: Remote alarm on passenger and goods passenger lifts
EN 81-70:2003, Safety rules for the construction and installation of lifts – Particular applications for passenger and
goods passenger lifts – Part 70: Accessibility to lifts for persons including persons with disability
EN 81-72:2003, Safety rules for the construction and installation of lifts − Particular applications for passenger and
goods passenger lifts – Part 72: Firefighters lifts
CEN/TR 81-10:2008, Safety rules for the construction and installation of lifts – Basics and interpretations – Part 10:
System of the EN 81 series of standards
3 List of interpretations
The following lists show the valid interpretations contained in this document.
3.1 Interpretations pertaining to EN 81-1:1998 and EN 81-2:1998
Table 1 shows the list of interpretations in their numerical order.
Table 2 shows the list of interpretations in order of the chapters of EN 81-1:1998 and EN 81-2:1998 with the
corresponding keywords.
A number of interpretations pertaining to EN 81-1:1978, EN 81-1:1985 and EN 81-2:1987 are considered still valid
1)
for EN 81-1:1998 and EN 81-2:1998. Annex A shows the lists of these interpretations .
1)
These interpretations are available from the National CEN Member organisations or CEN/TC 10 secretariat.
5
---------------------- Page: 7 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 1 — List of interpretations in numerical order (EN 81-1 and EN 81-2)
Interpretation Date of Valid for
Related clause Key words
number validity (edition 1998)
501 5.6.1 2001-04-15 EN 81-1/2 Protection in the well; rigid screen
Filters; hydraulic control and
502
12.5.7 2001-04-15 EN 81-2
safety devices
503 J.1 (table) 2001-04-15 EN 81-1/2 Fixing of the glass panels; glass
Dimensions of the glass panels;
504 J.1 (table) 2001-04-15 EN 81-1/2
glass
505 13.3.2 2001-04-15 EN 81-1/2 Door motor; overload protection
Machine-room accesses; main
506
13.4.2 2001-04-15 EN 81-1/2
switch
Emergency electrical operation;
507 14.2.1.4 2001-04-15 EN 81-1
inspection operation
6
---------------------- Page: 8 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 1 — List of interpretations in numerical order (EN 81-1 and EN 81-2) (continued)
Interpretation Date of Valid for
Related clause Key words
number validity (edition 1998)
Laboratory tests; safety circuits
508
F.6 2001-04-15 EN 81-1/2
containing electronic components
Electric safety circuits; printed
509 H.1 (table) 2001-04-15 EN 81-1/2
circuits boards
Electric safety circuit; gathering
510 14.1.2.1.3; H.1 (table) 2001-04-15 EN 81-1/2
information
511
15 2001-04-15 EN 81-1/2 Data plate; safety device
Final limit switch; actuation zone;
512 10.5.3.1; 10.5.3.2 2001-04-15 EN 81-2
creeping
Final limit switch; actuation zone;
513 10.5.3.1; 10.5.3.2 2001-04-15 EN 81-2
creeping
Emergency alarm device; two-
way voice communication
514
14.2.3.3 2001-04-15 EN 81-1/2
Interpretation 514 is replaced
by 562
Bypass of landing door and/or car
515 14.1.2.1.3 2001-04-15 EN 81-1/2
door contacts
516 5.9 2002-12-31 EN 81-1/2 Illumination; lighting; well
Strength of the floor below the
517
5.3.2.2; 5.3.2.3 2001-04-15 EN 81-1/2
buffers
Glass panels; partially enclosed
518 5.3.1.2 2001-04-15 EN 81-1/2 well; points normally accessible to
persons
13.1.2; 14.1.2.2.2; 14.1.2.2.3; Code IP; degree of protection;
519 2001-04-15 EN 81-1/2
16.2 a) 6) diagram; graphic symbol
Balancing weight; counterweight;
520 9.8.3.1 2001-04-15 EN 81-1 safety gear; safety rope;
suspension means
521 10.3.1 2001-04-15 EN 81-1/2 Car and counterweight buffer
522 15 2001-04-15 EN 81-1/2 Electronic component; marking
Goods passenger lift; maximum
523 8.2.2.4 2001-04-15 EN 81-2:1998
available car area; rated load
1.3 g); 8.11.3; 8.18.1 b); Rated speed 1 m/s
524
2001-04-15 EN 81-2
10.3.6; 10.3.7
Rated speed 0,63 m/s; safety
525 9.8.2.1 d) 2001-04-15 EN 81-2
gear
526 9.9.2.1 2001-04-15 EN 81-2 Clamping device; tripping speed
527 9.9.5.1; 9.9.5.2 2001-04-15 EN 81-2 Clamping device; release
Energy accumulation type
528 D.2 n) 1) 2001-04-15 EN 81-2
buffers; test
Exceptions to tests; pendulum
529 J.7 2001-04-15 EN 81-1/2
shock test
530 J.7 2001-04-15 EN 81-1/2 Plain glass panel; door
7
---------------------- Page: 9 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 1 — List of interpretations in numerical order (EN 81-1 and EN 81-2) (continued)
Interpretation Date of Valid for
Related clause Key words
number validity (edition 1998)
531
14.2.2.2 2001-04-15 EN 81-1/2 Door; stopping device
Maximum allowable pressure;
532 1.2; 1.3 2001-04-15 EN 81-2
non-toxic fluid; scope
Reduced buffer stroke; monitoring
533 10.4.3.2; 12.8 2001-04-15 EN 81-1
the slowdown
Alarm devices; emergency
534 5.10 2001-04-15 EN 81-1/2
release; pit
Ascending car; overspeed;
535 9.10.3 2001-04-15 EN 81-1
retardation of the car
Access to the interior of machine
536 6.2.2 b) 2001-04-15 EN 81-1/2
room by means of a ladder
Anti-rebound device;
537
9.6.2 2001-04-15 EN 81-1
compensation with ropes
Accessibility of rupture valve;
538 12.5.5.2; 12.5.6.2 2001-04-15 EN 81-2
restrictor
5.7.3.2 Accessibility of the pit
(EN 81-1)
539 2001-04-15 EN 81-1/2
5.7.2.2
(EN 81-2)
Inspection controls in relation to
540 14.2.1.3 2001-04-15 EN 81-1/2
glass lifts
Electric installations; electrical
541 13.1.1.2; 13.5.1.3; 13.5.3.6 2001-04-15 EN 81-1/2
wiring; method of installation
Guide rails; yield point; tensile
542 10.1.2.1 2001-04-15 EN 81-1/2
strength
543 16.1.3; F.0.2 2001-04-15 EN 81-1/2 Type examination certificate
544
8.2.1; Table 1.1 2001-12-14 EN 81-1/2 Available car area; tolerance
545 10.5.3.1 2001-12-14 EN 81-1 Final limit switch on drum drive lift
Sheave equivalent number
546
Annex N; Table N.1 2001-12-14 EN 81-1
evaluation N
equiv(t)
5.7.3.3 b) 2) Pit; horizontal distance
(EN 81-1)
547 2002-12-31 EN 81-1/2
5.7.2.3 b) 2)
(EN 81-2)
Safety circuits; connections; type
548
14.1.2.1.3; 14.1.2.3; F.6 2001-12-14 EN 81-1/2
examinations
549 8.17.4 2001-12-14 EN 81-1/2 Lighting; emergency; intensity
550 6.3.6 2001-12-14 EN 81-1/2 Machine room; illumination
551 5.9 2001-12-14 EN 81-1/2 Pit; car roof lighting
Monitoring device (for the function
552 12.7.1; 12.7.3 a) 2001-12-14 EN 81-1
check); main contactors
553 3; 14.1.2.4 2002-12-31 EN 81-1/2 Electric safety chain
8
---------------------- Page: 10 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 1 — List of interpretations in numerical order (EN 81-1 and EN 81-2) (continued)
Interpretation Date of Valid for
Related clause Key words
number validity (edition 1998)
554 12.12.4 2003-12-08 EN 81-2 Motor run-time limiter
9.8.1.1; 9.8.1.2; 9.8.8; 9.9.11.1; Safety gear on car/counterweight;
555 2002-12-31 EN 81-1
9.10.1; 9.10.4; 9.10.5 electric safety device
Tripping the safety gear by the
556 9.10.3.2, Annex D.2 2003-12-08 EN 81-2 breakage of the suspension
means, test
Car buffer; distance between car
557 10.3.3 2002-12-31 EN 81-2
floor and landing
558
14.2 2002-12-31 EN 81-2 Emergency electrical control
9.9.2 Overspeed governor; very heavy
(EN 81-1) rated load; very low speed
559 2002-12-31 EN 81-1/2
9.10.2.2
(EN 81-2)
560 12.4.2.1, Annex D.2 2003-12-08 EN 81-1 Electro-mechanical brake; test
9.1.2; 9.6; 9.9.6 Suspension ropes; compensation
(EN 81-1) ropes; overspeed governor ropes
561
2005-02-11 EN 81-1/2
9.1.2; 9.10.6
(EN 81-2)
562 14.2.3.3 2006-06-15 EN 81-1/2 Two-way voice communication
Electric personal protection;
563
13.6.1 2002-12-31 EN 81-1/2
lighting and socket outlets
Buffers with non-linear
564 10.4.1.2.2 2002-12-31 EN 81-1/2 characteristics; fully compressed
buffer
5.7.1.1 d); 5.7.2.2 c); 5.7.3.3 a) Pit; headroom; rectangular block
(EN 81-1)
565 2002-12-31 EN 81-1/2
5.7.1.1 d); 5.7.2.3 a)
(EN 81-2)
Pulleys; well; headroom
566 6.1.2 2002-12-31 EN 81-1/2
Wall-panels of glass; risk of falling
567
5.3.1.2 2002-12-31 EN 81-1/2
through
Counterweight; rigid screen;
568 5.6.1; 5.6.2 2002-12-31 EN 81-1/2 separation screen; mechanical
strength
Equipment of machine rooms;
569 6.3; 6.4 2002-12-31 EN 81-1/2
pulley rooms; control devices
Inspection operation; control
570 14.2.1.3 2003-12-08 EN 81-1/2
station
571 8.13.3; 8.13.3.2; 8.13.4 2005-02-11 EN 81-1/2 Height of balustrade; car roof
572
8.13.3 2005-02-11 EN 81-1/2 Car roof; balustrade
Mechanical strength; landing
573 7.2.3.1; 8.6.7.1 2005-02-11 EN 81-1/2
doors; car doors
9
---------------------- Page: 11 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 1 — List of interpretations in numerical order (EN 81-1 and EN 81-2) (concluded)
Interpretation Date of Valid for
Related clause Key words
number validity (edition 1998)
Mechanical strength; landing
574 7.2.3.1; 8.3.2.1; 8.6.7.1 2005-02-11 EN 81-1/2
doors; car walls; car doors
7.5.2.1.1.1; 7.5.2.1.1.2; Door closing effort; kinetic
575 2005-02-11 EN 81-1/2
8.7.2.1.1.1; 8.7.2.1.1.2
energy of doors
576 7.7.3.2 2005-02-11 EN 81-1/2 Landing door; automatic closing
577 8.7.2.1.1.3 2005-02-11 EN 81-1/2 Car door; re-opening device
Stopping accuracy; levelling
578
12.1 2005-02-11 EN 81-1/2
accuracy
579 14.2.3 2006-06-15 EN 81-1/2 Emergency alarm device
Energy accumulation type buffers
10.3.4; 10.3.6 2006-06-15 EN 81-1 with non-linear characteristics and
580
with buffered return movement
581 16.3; 16.3.2 2006-06-15 EN 81-1/2 Maintenance instructions
582 8.17.1 2006-06-15 EN 81-1/2 Lift car; lighting; lighting intensity
583 6.5.5 2006-06-15 EN 81-1/2/A2 Lighting; socket outlets
Table 2 — Interpretations in order of the clauses (EN 81-1 and EN 81-2)
Valid for
Interpretation
Related clause Keywords
Date of validity
(edition 1998)
number
Maximum allowable pressure; non-toxic fluid;
1.2 532 2001-04-15 EN 81-2
scope
Maximum allowable pressure; non-toxic fluid;
532
1.3 2001-04-15 EN 81-2
scope
1.3 g) 524 2001-04-15 EN 81-2 Rated speed 1m/s
3 553 2002-12-31 EN 81-1/2 Electric safety chain
Glass panels; partially enclosed well; points
518 2001-04-15
5.3.1.2 EN 81-1/2 normally accessible to persons; wall-panels of
567
2002-12-31
glass; risk of falling through
5.3.2.2 517 2001-04-15 EN 81-1/2 Strength of the floor below the buffers
5.3.2.3 517 2001-04-15 EN 81-1/2 Strength of the floor below the buffers
Protection in the well; rigid screen;
501 2001-04-15
5.6.1 EN 81-1/2 counterweight; rigid screen; separation
568
2002-12-31
screen; mechanical strength
Counterweight; rigid screen; separation
5.6.2 568 2002-12-31 EN 81-1/2
screen; mechanical strength
5.7.1.1 d) 565 2002-12-31 EN 81-1/2 Pit; headroom; rectangular block
539
5.7.2.2 2001-04-15 EN 81-1/2 Accessibility of the pit
565
5.7.2.2 c) 2002-12-31 EN 81-1/2 Pit; headroom; rectangular block
5.7.2.3 a) 565 2002-12-31 EN 81-1/2 Pit; headroom; rectangular block
10
---------------------- Page: 12 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 2 — Interpretations in order of the clauses (EN 81-1 and EN 81-2) (continued)
Valid for
Interpretation
Related clause Keywords
Date of validity
(edition 1998)
number
5.7.2.3 b) 2) 547 2002-12-31 EN 81-1/2 Pit; horizontal distance
5.7.3.2 539 2001-04-15 EN 81-1/2 Accessibility of the pit
5.7.3.3 a) 565 2002-12-31 EN 81-1/2 Pit; headroom; rectangular block
547
5.7.3.3 b) 2) 2002-12-31 EN 81-1/2 Pit; horizontal distance
516
2002-12-31
5.9 EN 81-1/2 Illumination; lighting; well; pit; car roof lighting
551 2001-12-14
5.10 534 2001-04-15 EN 81-1/2 Alarm devices; emergency release; pit
6.1.2 566 2002-12-31 EN 81-1/2 Pulleys; well; headroom
Access to the interior of machine room by
536
6.2.2 b) 2001-04-15 EN 81-1/2
means of a ladder
Equipment of machine rooms; pulley rooms;
6.3 569 2002-12-31 EN 81-1/2
control devices
6.3.6 550 2001-12-14 EN 81-1/2 Machine room; illumination
Equipment of machine rooms; pulley rooms;
569
6.4 2002-12-31 EN 81-1/2
control devices
583
6.5.5 2006-06-15 EN 81-1/2/A2 Lighting; socket outlets
Mechanical strength; landing doors; car
573 2005-02-11 doors.
7.2.3.1 EN 81-1/2
574
2005-02-11 Mechanical strength; landing doors; car walls;
car doors.
7.5.2.1.1.1 575 2005-02-11 EN 81-1/2 Door closing effort; kinetic energy of doors
7.5.2.1.1.2 575 2005-02-11 EN 81-1/2 Door closing effort; kinetic energy of doors
7.7.3.2 576 2005-02-11 EN 81-1/2 Landing door; automatic closing
8.2.1; Table 1.1 544 2001-12-14 EN 81-1/2 Available car area; tolerance
Goods passenger lift; maximum available car
8.2.2.4 523 2001-04-15 EN 81-2
area; rated load
Mechanical strength; landing doors; car walls;
8.3.2.1 574 2005-02-11 En 81-1/2
car doors
Mechanical strength; landing doors; car
573
doors.
8.6.7.1 2005-02-11 EN 81-1/2
Mechanical strength; landing doors; car walls;
574
car doors
8.7.2.1.1.1 575 2005-02-11 EN 81-1/2 Door closing effort; kinetic energy of doors
8.7.2.1.1.2 575 2005-02-11 EN 81-1/2 Door closing effort; kinetic energy of doors
8.7.2.1.1.3 577 2005-02-11 EN 81-1/2 Car door; re-opening device
8.11.3 524 2001-04-15 EN 81-2 Rated speed 1 m/s
8.13.2 571 2005-02-11 EN 81-1/2 Height of balustrade; car roof
571 2005-02-11 Height of balustrade; car roof
8.13.3 EN 81-1/2
572
2005-02-11 Car roof; balustrade
571
8.13.4 2005-02-11 EN 81-1/2 Height of balustrade; car roof
582
8.17.1 2006-06-15 EN 81-1/2 Lift car; lighting; lighting intensity
11
---------------------- Page: 13 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 2 — Interpretations in order of the clauses (EN 81-1 and EN 81-2) (continued)
Valid for
Interpretation
Related clause Keywords
Date of validity
(edition 1998)
number
8.17.4 549 2001-12-14 EN 81-1/2 Lighting; emergency; intensity
524
8.18.1 b) 2001-04-15 EN 81-2 Rated speed 1 m/s
Suspension ropes; compensation ropes;
9.1.2 561 2005-02-11 EN 81-1/2
overspeed governor ropes
Suspension ropes; compensation ropes;
9.6 561 2005-02-11 EN 81-1
overspeed governor ropes
Anti-rebound device; compensation with
9.6.2 537 2001-04-15 EN 81-1
ropes
Safety gear on car/counterweight; electric
555
9.8.1.1 2002-12-31 EN 81-1
safety device
Safety gear on car/counterweight; electric
9.8.1.2 555 2002-12-31 EN 81-1
safety device
525
9.8.2.1 d) 2001-04-15 EN 81-2 Rated speed 0,63 m/s; safety gear
Balancing weight; counterweight; safety gear;
520
9.8.3.1 2001-04-15 EN 81-1/2
safety rope; suspension means
Safety gear on car/counterweight; electric
9.8.8 555 2002-12-31 EN 81-1
safety device
Overspeed governor; very heavy rated load;
9.9.2 559 2002-12-31 EN 81-1/2
very low speed
9.9.2.1 (last indent) 526 2001-04-15 EN 81-2 Clamping device; tripping speed
9.9.5.1 527 2001-04-15 EN 81-2 Clamping device; release
9.9.5.2 527 2001-04-15 EN 81-2 Clamping device; release
Suspension ropes; compensation ropes;
9.9.6 561 2005-02-11 EN 81-1
overspeed governor ropes
Safety gear on car/counterweight; electric
9.9.11.1 555 2002-12-31 EN 81-1
safety device
Safety gear on car/counterweight; electric
555
9.10.1 2002-12-31 EN 81-1
safety device
Overspeed governor; very heavy rated load;
9.10.2.2 559 2002-12-31 EN 81-1/2
very low speed
Ascending car; overspeed; retardation of the
9.10.3 535 2001-04-15 EN 81-1
car
9.10.3.2; Tripping the safety gear by the breakage of
556 2003-12-08 EN 81-2
Annex D.2 the suspension means; test
Safety gear on car/counterweight; electric
9.10.4 555 2002-12-31 EN 81-1
safety device
Safety gear on car/counterweight; electric
555
9.10.5 2002-12-31 EN 81-1
safety device
Suspension ropes; compensation ropes;
9.10.6 561 2005-02-11 EN 81-2
overspeed governor ropes
10.1.2.1 542 2001-04-15 EN 81-1/2 Guide rails; yield point; tensile strength
Car and counterweight buffer
521 2002-04-15 EN 81-1/2 Energy accumulation type buffers with non-
10.3.1
580
2006-06-15 EN 81-1 linear characteristics and with buffered return
movement
12
---------------------- Page: 14 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 2 — Interpretations in order of the clauses (EN 81-1 and EN 81-2) (continued)
Valid for
Interpretation
Related clause Keywords
Date of validity
(edition 1998)
number
Car buffer; distance between car floor and
557
10.3.3 2002-12-31 EN 81-2
landing
Rated speed 1 m/s
524 2001-04-15 Energy accumulation type buffers with non-
10.3.6 EN 81-2
580
2006-06-15 linear characteristics and with buffered return
movement.
10.3.7 524 2001-04-15 EN 81-2 Rated speed 1 m/s
Buffers with non-linear characteristics; fully
10.4.1.2.2 564 2002-12-31 EN 81-1/2
compressed buffer
Reduced buffer stroke; monitoring the
10.4.3.2 533 2001-04-15 EN 81-1
slowdown
512
2001-04-15
Actuation zone; creeping; final limit switch;
10.5.3.1 513 2001-04-15 EN 81-1/2
final limit switch on drum drive lift
545 2001-12-14
512
10.5.3.2 2001-04-15 EN 81-2 Actuation zone; creeping; final limit switch
513
12.1 578 2005-02-11 EN 81-2 Stopping accuracy; levelling accuracy
12.4.2.1;
560
2003-12-08 EN 81-1 Electro-mechanical brake; test
Annex D.2
12.5.5.2 538 2001-04-15 EN 81-2 Accessibility of rupture valve; restrictor
12.5.6.2 538 2001-04-15 EN 81-2 Accessibility of rupture valve; restrictor
12.5.7 502 2001-04-15 EN 81-2 Filters; hydraulic control and safety devices
Monitoring device (for the function check);
12.7.1 552 2001-12-14 EN 81-1
main contactors
Monitoring device (for the function check);
12.7.3 a) 552 2001-12-14 EN 81-1
main contactors
Reduced buffer stroke; monitoring the
533
12.8 2001-04-15 EN 81-1
slowdown
12.12.4 554 2003-12-08 EN 81-2 Motor run-time limiter
Electric installations; electrical wiring; method
13.1.1.2 541 2001-04-15 EN 81-1/2
of installation
Code IP; degree of protection; diagram;
13.1.2 519 2001-04-15 EN 81-1/2
graphic symbol
13.3.2 505 2001-04-15 EN 81-1/2 Door motor; overload protection
13.4.2 506 2001-04-15 EN 81-1/2 Machine-room accesses; main switch
Electric installations; electrical wiring; method
13.5.1.3 541 2001-04-15 EN 81-1/2
of installation
Electric installations; electrical wiring; method
13.5.3.6 541 2001-04-15 EN 81-1/2
of installation
Electric personal protection; lighting and
13.6.1 563 2002-12-31 EN 81-1/2
socket outlets
13
---------------------- Page: 15 ----------------------
SIST-TS CEN/TS 81-11:2010
CEN/TS 81-11:2009 (E)
Table 2 — Interpretations in order of the clauses (EN 81-1 and EN 81-2) (concluded)
Valid for
Interpretation
Related clause Keywords
Date of validity
(edition 1998)
number
Electric safety circuit; gathering information;
510 2001-04-15
safety circuits; connections; type
14.1.2.1.3 515 2001-04-15 EN 81-1/2
examinations; bypass of landing door and/or
548 2001-12-14
car door contacts
Code IP; degree of protection; diagram;
519
14.1.2.2.2 2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.