ECISS/TC 30/SC 1 - Wire coatings

This part of this European Standard specifies the requirements for mass, other properties and testing of tin coatings on steel wire and steel wire products of round or other cross section.

This part of this European Standard specifies the requirements for the mass, other properties and testing of aluminium coatings on steel wire and steel wire products of circular or other cross-section.

This part of this European Standard specifies the requirements for mass, other properties and testing of nickel coatings on steel wire and steel wire products of round or other cross-section.

This part of this European Standard specifies the requirements for mass, other properties and testing of copper, bronze and brass coatings on steel wire and steel wire products.

This part of this European Standard defines round and shaped non alloyed steel wire for use in the manufacture of ropes for mine hoisting, man-riding haulage, cableways for the transportation of passengers and other high duty applications.
This part of this European Standard refers to round wires and three types of shaped wire: full lock (Z), half lock (H) and trapezoidal (T).
In addition to the requirements of this part of this European Standard, the requirements of prEN 10264-1 also apply.
It does not apply to steel wire taken from manufactured ropes.
This part of this European Standard specifies the following for cold drawn non alloyed steel wire for ropes for high duty applications:
- dimensional tolerances;
- mechanical characteristics;
- requirements relating to the chemical composition of the steel wire;
- conditions to be satisfied by any coating.

This Part of this European Standard specifies the characteristics of stainless steel wire for the manufacture of ropes that are exposed to corrosion and in some cases to a moderate temperature.
This part of this European standard specifies the following for stainless steel wire for ropes
- dimensional tolerances;
- mechanical characteristics;
- requirements relating to the chemical composition of the stainless steel wire;
- conditions to be satisfied by any coating.

This part of this European Standard defines the general requirements for wire for ropes. Additional requirements are given in the following parts of this standard, which are specific to each category of wire. This standard specifies: - dimensional tolerances; - mechanical characteristics; - requirements relating to the chemical composition of the steel wire; - conditions to be satisfied by any coating.

This part of this European Standard defines cold drawn non alloyed steel wire used for the manufacture of: - ropes made of drawn wire for general applications as defined in EN ...; - ropes made of large diameter drawn wire as definied in EN ...; - ropes made of non alloyed drawn wire for which there is no specific EN standard. This part of this standard does not apply to steel wire taken from manufactured ropes.

Complementary to EN 10245-1, this document specifies the characteristics and requirements for steel wire and wire products coated with polyester.
It covers both thermoplastic and thermosetting polyester.

Complementary to prEN 10245-1, this part of prEN 10245 specifies the characteristics and requirements for steel wire and wire products coated with polyethylene, (PE).

Complementary to prEN 10245-1, this Part 2 of prEN 10245 specifies the characteristics and requirements for steel wire and wire products coated with PVC.

This Standard specifies the requirements for the characteristics and testing methods for organic coating material suitable for the application on to steel wire and wire products of circular or other sections. Other organic materials which are applied intentionally or otherwise such as oils, greases, waxes and tempo rary finishes which do not become integral or a permanent part of the finished wire product are excluded from this standard.

This part of this European Standard specifies the requirements for mass, other properties and testing of zinc and zinc alloy coatings on steel wire and steel wire products of circular or other section.

This part of this European Standard specifies the requirements for the mass other properties and testing of non-ferrous metal coatings on steel wire and steel wire products of circular or other cross-section. This European Standard deals with requirements of general application and is of use for those coatings for which no particular requirement have been laid down in the following parts (2 to 6). Deviations are possible, particularly if required for well defined products. In such case, appropriate requirements shall be part of the relevant product standard.