EN 10245-3:2001

Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire

Complementary to prEN 10245-1, this part of prEN 10245 specifies the characteristics and requirements for steel wire and wire products coated with polyethylene, (PE).

Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 3: PE-beschichteter Draht

Ergänzend zu EN 10245-1 legt dieser Teil von EN 10245 Eigenschaften und Anforderungen für Stahldraht und Drahterzeugnisse, die mit Polyethylen (PE) beschichtet sind, fest.

Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 3: Fils à revêtement de PE

Domaine d'application
La présente norme européenne EN 10245-3, qui vient en complément de la norme EN 10245-1, spécifie les caractéristiques et prescriptions relatives aux fils et produits tréfilés en acier à revêtement de polyéthylène (PE).

Jeklena žica in žični izdelki - Organske prevleke na jekleni žici - 3. del: Žica, prevlečena s PE

General Information

• Status: Withdrawn
• Publication Date: 20-Mar-2001
• Withdrawal Date: 25-Oct-2011
• ICS: 25.220.60 - Organic coatings
• Technical Committee: ECISS/TC 106 - Wire rod and wires
• Drafting Committee: ECISS/TC 30/SC 1 - Wire coatings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-Oct-2011
• Completion Date: 26-Oct-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
• Mandate: M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
• Ref Project: SIST EN 10245-3:2002 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire

Relations

• Replaced By: EN 10245-3:2011 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 3: PE-beschichteter DrahtFils et produits tréfilés en acier - Revetements organiques sur fils d'acier - Partie 3: Fils a revetement de PESteel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10245-3:2001SIST EN 10245-3:2002en01-september-2002SIST EN 10245-3:2002SLOVENSKI
STANDARD



SIST EN 10245-3:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10245-3March 2001ICS 25.220.60English versionSteel wire and wire products - Organic coatings on steel wire -Part 3: PE coated wireFils et produits tréfilés en acier - Revêtements organiquessur fils d'acier - Partie 3: Fils à revêtement de PEStahldraht und Drahterzeugnisse - OrganischeBeschichtungen auf Draht - Teil 3: PE-beschichteter DrahtThis European Standard was approved by CEN on 21 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10245-3:2001 ESIST EN 10245-3:2002



Page 2EN 10245-3:2001ContentsPageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Types of PE coating materials.65Requirements and test methods for PE coating material.65.1Requirements.65.1.1The composition and method of application.65.1.2PE organic coating material consistency.65.1.3Density.65.1.4Melt flow index.65.1.5Tensile strength.75.1.6Elongation.75.2Test methods.75.2.1General.75.2.2Melt flow index.76Requirements and test methods for PE coating on wire.76.1Requirements.76.1.1Appearance.
...