Steel wire and wire products -Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings

This part of this European Standard specifies the requirements for the mass, other properties and testing of aluminium coatings on steel wire and steel wire products of circular or other cross-section.

Stahldraht und Drahterzeugnisse - Überzüge aus Nichteisenmetall auf Stahldraht - Teil 3: Überzüge aus Aluminium

Dieser Teil dieser Europäische Norm legt die Anforderungen an Masse, andere Aigenschaften und Prüfung von Aluminiumüberzügen auf Stahldrahterzeugnissen mit rundem oder anderem Querschnitt fest.

Fils et produits tréfilés en acier - Revêtements métalliques non ferreux sur fils d'acier - Partie 3: Revêtements d'aluminium

Domaine d'application
La présente partie de la présente norme européenne spécifie les exigences en matière de masse, des autres caractéristiques et d'essai de revêtements d'aluminium sur fils en acier de section circulaire ou autre et produits dérivés.

Jeklena žica in žični izdelki - Neželezne kovinske prevleke na jekleni žici - 3. del: Aluminijeve prevleke

General Information

Status
Published
Publication Date
20-Mar-2001
Withdrawal Date
29-Sep-2001
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
04-Mar-2020

Buy Standard

Standard
EN 10244-3:2002
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Überzüge aus Nichteisenmetall auf Stahldraht - Teil 3: Überzüge aus AluminiumFils et produits tréfilés en acier - Revetements métalliques non ferreux sur fils d'acier - Partie 3: Revetements d'aluminiumSteel wire and wire products -Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.40Kovinske prevlekeMetallic coatingsICS:Ta slovenski standard je istoveten z:EN 10244-3:2001SIST EN 10244-3:2002en01-september-2002SIST EN 10244-3:2002SLOVENSKI
STANDARD



SIST EN 10244-3:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10244-3March 2001ICS 25.220.40English versionSteel wire and wire products - Non-ferrous metallic coatings onsteel wire - Part 3: Aluminium coatingsFils et produits tréfilés en acier - Revêtements métalliquesnon ferreux sur fils d'acier - Partie 3: Revêtementsd'aluminiumStahldraht und Drahterzeugnisse - Überzüge ausNichteisenmetall auf Stahldraht - Teil 3: Überzüge ausAluminiumThis European Standard was approved by CEN on 21 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10244-3:2001 ESIST EN 10244-3:2002



Page 2EN 10244-3:2001ContentsForeword.31Scope.42Normative reference.43Terms and definitions.44Requirements relating to coating.44.1Material.44.2Coating mass.44.3Appearance of coating.54.4Adherence of the coating.54.5Special finishes.55Tests conditions.55.1Samples.55.1.1General.55.1.2Length of samples.55.2Determination of mass of coating.5SIST EN 10244-3:2002



Page 3EN 10244-3:2001ForewordThis European Standard has been prepared by Technical Committee ECISS/TC 30 "Steel wires", thesecretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by September 2001, and conflicting national standardsshall be withdrawn at the latest by September 2001.This European Standard for non-fer
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.