EN 10245-2:2001
(Main)Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
Complementary to prEN 10245-1, this Part 2 of prEN 10245 specifies the characteristics and requirements for steel wire and wire products coated with PVC.
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 2: PVC-beschichteter Draht
Ergänzend zu EN 10245-1 legt dieser Teil 2 von EN 10245 Eigenschaften und Anforderungen für Stahldraht und Drahterzeugnisse, die mit PVC beschichtet sind, fest.
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 2: Fils à revêtement de PVC
Domaine d'application
La présente norme EN 10245-2, qui vient en complément de la norme EN 10245-1, spécifie les caractéristiques et prescriptions relatives aux fils et produits tréfilés en acier à revêtement de PVC.
Jeklena žica in žični izdelki - Organske prevleke na jekleni žici - 2. del: Žica, prevlečena s PVC
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2002
-HNOHQDåLFDLQåLþQLL]GHONL2UJDQVNHSUHYOHNHQDMHNOHQLåLFLGHO äLFD
SUHYOHþHQDV39&
Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 2: PVC-
beschichteter Draht
Fils et produits tréfilés en acier - Revetements organiques sur fils d'acier - Partie 2: Fils a
revetement de PVC
Ta slovenski standard je istoveten z: EN 10245-2:2001
ICS:
25.220.60 Organske prevleke Organic coatings
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 10245-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2001
ICS 25.220.60
English version
Steel wire and wire products - Organic coatings on steel wire -
Part 2: PVC finished wire
Fils et produits tréfilés en acier - Revêtements organiques Stahldraht und Drahterzeugnisse - Organische
sur fils d'acier - Partie 2: Fils à revêtement de PVC Beschichtungen auf Draht - Teil 2: PVC-beschichteter
Draht
This European Standard was approved by CEN on 21 January 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10245-2:2001 E
worldwide for CEN national Members.
Page 2
Contents
Page
Foreword .3
Introduction .4
1 Scope.5
2 Normative references.5
3 Terms and definitions.5
4 Methods of application and classes of PVC coatings.6
5 Requirements and testing methods for the PVC coating material .6
5.1 Requirements .6
5.1.1 The PVC organic coating composition .6
5.1.2 PVC organic coating material consistency .6
5.2 Test methods.7
6 Requirement and test on the PVC coating on wire.7
6.1 Requirements .7
6.2 Test methods.7
7 Performance requirements and testing methods for PVC coatings on wire .8
7.1 Performance requirements .8
7.2 Test methods for performance appraisal .8
8 Retests .8
9 Inspection and quality assurance .9
Page 3
Foreword
This European Standard has been prepared by Technical Committee ECISS/TC 30 "Steel wires", the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2001, and conflicting national standards
shall be withdrawn at the latest by September 2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Page 4
Introduction
This European Standard for organic coatings for steel wire is a number of parts; Part 1 covering the
requirements of a general nature and applying also to coatings for which no specific requirements
have been established in the subsequent parts of this standard.
The subsequent parts of this standard deal more specifically with clearly defined coatings or groups of
coatings. These coatings may have their own particular methods of application and their individual
requirements which are specified in these parts of this standard, in other standards or in
manufacturers data sheets.
Because the standard specifies requirements and tests not only for the coating but also for the
coating material, it has proved not practical to put all the requirements in one clause and all the tests
in another one. Following structure has been chosen in order to limit complexity and to facilitate the
use.
This standard is made up of the following parts :
Part 1 : General Rules
Part 2 : PVC coated wire
Part 3 : PE coated wire
Part 4: Polyester coated wire
In writing this series of standards consideration has been given to the nomenclature and
transformation of organic coating materials as applied to steel wire products. These organic coating
materials may on application to wire and by their integration into the finished wire product change
their characteristics and properties.
This standard specifies characteristics and tests not only for the organic coating but also for the
coating materials both before and after their application to steel wire and wire products. In addition it
specifies the requirements for performance levels and testing methods on organic coating material
which have become an integral and permanent part of the finished wire product. Therefore it has
proven not to be practical to put all requirements in one clause and all the tests in another one.
To aid continuity and in order to limit complexity following structure has been chosen for this standard.
Clause 4 Deals with the characteristics and testing methods of organic coating material
as supplied by the manufacturer for the purposes of its application to the wire product.
Tests described in this section are intended to be carried out by the organic coating
before
material manufacturer or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.