SIST EN ISO 7369:2020
(Main)Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2020)
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2020)
The vocabulary in ISO 7369:2004 is out of date and that this standard needs to be revised to update the definitions in accordance to EN ISO 10380, EN 14585 and the PED (Pressure Equipment Directive).
Revision of EN ISO 7369:2004 under VA/CEN lead with Eric Winterbert as project leader is accepted by ISO/TC 5/SC 11 (Resolution 1/2016).
The exact scope of the revision will be clarified by the project group before launching the NWIP ballot.
EN-ISO 7369 defines current terms concerning metal hoses, metal hose assemblies and component parts.This document applies to:a) stripwound metal hoses and hose assemblies;b) corrugated metal hoses and hose assemblies.
Rohrleitungen - Metallschläuche und Metallschlauchleitungen - Vokabular (ISO 7369:2020)
Dieses Dokument definiert die derzeit üblichen Begriffe für Metallschläuche, Metallschlauch¬leitungen und Bauteile.
Dieses Dokument gilt für:
a) gewickelte Metallschläuche und –schlauchleitungen;
b) gewellte Metallschläuche und –schlauchleitungen.
ANMERKUNG 1 Diese Schläuche können mit Umflechtung, Ummantelung oder Auskleidung verwendet werden.
ANMERKUNG 2 Entsprechende Begriffe auf Englisch, Französisch, Deutsch und Niederländisch sind in Anhang A enthalten.
Tuyauteries - Tuyaux et tuyauteries métalliques flexibles - Vocabulaire (ISO 7369:2020)
Le présent document définit les termes courants relatifs aux tuyaux métalliques flexibles, aux tuyauteries métalliques flexibles et à leurs pièces constitutives.
Le présent document est applicable aux:
a) tuyaux métalliques et tuyauteries métalliques flexibles agrafés;
b) tuyaux métalliques et tuyauteries métalliques flexibles onduleux.
NOTE 1 Ces tuyaux flexibles peuvent être utilisés équipés d'une tresse, revêtus extérieurement ou intérieurement.
NOTE 2 Les termes équivalents en anglais, français, allemand et néerlandais sont indiqués dans l'Annexe A.
Cevovod - Kovinske cevi in cevni priključki - Slovar (ISO 7369:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7369:2020
01-julij-2020
Nadomešča:
SIST EN ISO 7369:2004
Cevovod - Kovinske cevi in cevni priključki - Slovar (ISO 7369:2020)
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2020)
Rohrleitungen - Metallschläuche und Metallschlauchleitungen - Vokabular (ISO
7369:2020)
Tuyauteries - Tuyaux et tuyauteries métalliques flexibles - Vocabulaire (ISO 7369:2020)
Ta slovenski standard je istoveten z: EN ISO 7369:2020
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.040.10 Železne in jeklene cevi Iron and steel pipes
SIST EN ISO 7369:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7369:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 7369:2020
EN ISO 7369
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2020
EUROPÄISCHE NORM
ICS 01.040.23; 23.040.70 Supersedes EN ISO 7369:2004
English Version
Pipework - Metal hoses and hose assemblies - Vocabulary
(ISO 7369:2020)
Tuyauteries - Tuyaux et tuyauteries métalliques Rohrleitungen - Metallschläuche und
flexibles - Vocabulaire (ISO 7369:2020) Metallschlauchleitungen - Vokabular (ISO 7369:2020)
This European Standard was approved by CEN on 28 April 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7369:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7369:2020
EN ISO 7369:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7369:2020
EN ISO 7369:2020 (E)
European foreword
This document (EN ISO 7369:2020) has been prepared by Technical Committee ISO/TC 5 "Ferrous
metal pipes and metallic fittings" in collaboration with Technical Committee CEN/TC 342 “Metal hoses,
hose assemblies, bellows and expansion joints” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7369:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 7369:2020 has been approved by CEN as EN ISO 7369:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 7369:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 7369:2020
INTERNATIONAL ISO
STANDARD 7369
Fourth edition
2020-04
Pipework — Metal hoses and hose
assemblies — Vocabulary
Tuyauteries — Tuyaux et tuyauteries métalliques flexibles —
Vocabulaire
Reference number
ISO 7369:2020(E)
©
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 7369:2020
ISO 7369:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7369:2020
ISO 7369:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General . 1
3.2 Construction . 3
3.2.1 Metal hoses (stripwound or corrugated) . 3
3.2.2 Metal hose assemblies . 4
Annex A (informative) Equivalent terms in English, French, German and Dutch .5
Bibliography . 7
© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 7369:2020
ISO 7369:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by the European Committee for Standardization (CEN) TechnicalCommittee
CEN/TC 342, Metal hoses, hose assemblies, bellows and expansion joints, in collaboration with ISO
Technical Committee ISO/TC 5, Ferrous metal pipes and metallic fittings, Subcommittee SC 11, Metal
hoses and expansion joints, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
This fourth edition cancels and replaces the third edition (ISO 7369:2004), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— shift updated normative references into Bibliography;
— introduction of new definitions related to "design pressure", "metal braid strand", "braided braid"
and " nominal size of metal hose assembly";
— revision of definitions related to "maximum allowable pressure", "maximum allowable temperature"
and "minimum allowable temperature";
— update of Annex A to include French, German and Dutch terms and deletion of Annexes B, C, D and E.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 7369:2020
ISO 7369:2020(E)
Introduction
It was decided to produce a standard under the Vienna Agreement on technical cooperation between
ISO and the European Committee for Standardization CEN in order to maintain one document. The
opportunity was taken to re-format and add addi
...
SLOVENSKI STANDARD
oSIST prEN ISO 7369:2019
01-julij-2019
Cevovod - Kovinske cevi in cevni priključki - Slovar (ISO/DIS 7369:2019)
Pipework - Metal hoses and hose assemblies - Vocabulary (ISO/DIS 7369:2019)
Rohrleitungen - Metallschläuche und Metallschlauchleitungen - Vokabular (ISO/DIS
7369:2019)
Tuyauteries - Tuyaux et tuyauteries métalliques flexibles - Vocabulaire (ISO/DIS
7369:2019)
Ta slovenski standard je istoveten z: prEN ISO 7369
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.040.10 Železne in jeklene cevi Iron and steel pipes
oSIST prEN ISO 7369:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 7369:2019
---------------------- Page: 2 ----------------------
oSIST prEN ISO 7369:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 7369
ISO/TC 5/SC 11 Secretariat: SNV
Voting begins on: Voting terminates on:
2019-05-06 2019-07-29
Pipework — Metal hoses and hose assemblies —
Vocabulary
Tuyauteries — Tuyaux et tuyauteries métalliques flexibles — Vocabulaire
ICS: 01.040.23; 23.040.70
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 7369:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO 7369:2019
ISO/DIS 7369:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 7369:2019
ISO/DIS 7369:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Definitions relating to construction . 3
4.1 Metal hoses (stripwound or corrugated) . 3
4.2 Metal hose assemblies . 4
Annex A (informative) Equivalent terms in English . 5
Annex B (informative) Equivalent terms in French . 6
Annex C (informative) Equivalent terms in German . 7
© ISO 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 7369:2019
ISO/DIS 7369:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 5, Ferrous metal pipes and metallic fittings,
Subcommittee SC 11, Metal hoses and expansion joints.
This fourth edition cancels and replaces the third edition (ISO 7369:2004), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— update of normative references;
— introduction of new definitions related to "design pressure", "metal braid strand", "braided braid"
and " nominal size of metal hose assembly";
— revision of definitions related to "maximum allowable pressure", "maximum allowable temperature"
and "minimum allowable temperature";
— update of Annexes A, B and C and deletion of Annexes D and E.
Annexes A, B and C are for information only.
iv © ISO 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 7369:2019
ISO/DIS 7369:2019(E)
Introduction
It was decided to produce a Standard under the Vienna Agreement on technical cooperation between
ISO and the European Committee for Standardization CEN in order to maintain one document. The
opportunity was taken to re-format and add additional information, which was not available when the
standard was originally produced.
© ISO 2019 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 7369:2019
---------------------- Page: 8 ----------------------
oSIST prEN ISO 7369:2019
DRAFT INTERNATIONAL STANDARD ISO/DIS 7369:2019(E)
Pipework — Metal hoses and hose assemblies —
Vocabulary
1 Scope
This International Standard defines current terms concerning metal hoses, metal hose assemblies and
component parts.
This International Standard applies to:
a) Stripwound metal hoses and hose assemblies;
b) Corrugated metal hoses and hose assemblies.
NOTE These hoses may be used braided, covered or lined.
2 Normative references
The following normative documents contain provisions, which, through reference in this text,
constitute provisions of this International Standard. For dated references, subsequent amendments
to, or revisions of, any of these publications do not apply. However, parties to agreements based on
this International Standard are encouraged to investigate the possibility of applying the most recent
editions of the normative documents indicated below. For undated references, the latest edition of the
normative document referred to applies. Members of ISO and IEC maintain registers of currently valid
International Standards.
ISO 6708:1995, Pipework components — Definition and selection of DN (nominal
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.