EN 736-1:2018
(Main)Valves - Terminology - Part 1: Definition of types of valves
Valves - Terminology - Part 1: Definition of types of valves
This European Standard specifies the denominations of valves to provide a uniform and systematic terminology for all types of valves.
Armaturen - Terminologie - Teil 1: Definition der Grundbauarten
Diese Europäische Norm legt die Benennung von Armaturen fest, um eine einheitliche und systematische Terminologie für alle Armaturenbauarten bereitzustellen.
Appareils de robinetterie - Terminologie - Partie 1 : Définition des types d'appareils
La présente Norme Européenne spécifie les dénominations des appareils de robinetterie pour fournir une terminologie uniforme et systématique pour tous les types d’appareils de robinetterie.
Ventili - Terminologija - 1. del: Definicija osnovnih vrst ventilov
Ta standard določa nazive ventilov. Njegov namen je zagotavljanje enotne in sistematične terminologije za vse tipe ventilov. Zaradi klasifikacije pojmov točka 4 določa pojme, ki se nanašajo na osnovne oblikovne značilnosti, točka 5 pa določa pojme, ki se nanašajo na funkcionalne značilnosti ventilov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2018
1DGRPHãþD
SIST EN 736-1:2000
Ventili - Terminologija - 1. del: Definicija osnovnih vrst ventilov
Valves - Terminology - Part 1: Definition of types of valves
Armaturen - Terminologie - Teil 1: Definition der Grundbauarten
Appareils de robinetterie - Terminologie - Partie 1 : Définition des types d'appareils
Ta slovenski standard je istoveten z: EN 736-1:2018
ICS:
01.040.23 7HNRþLQVNLVLVWHPLLQVHVWDYQL Fluid systems and
GHOL]DVSORãQRUDER 6ORYDUML components for general use
(Vocabularies)
23.060.01 Ventili na splošno Valves in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 736-1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 01.040.23; 23.060.01 Supersedes EN 736-1:1995
English Version
Valves - Terminology - Part 1: Definition of types of valves
Appareils de robinetterie - Terminologie - Partie 1 : Armaturen - Terminologie - Teil 1: Definition der
Définition des types d'appareils Grundbauarten
This European Standard was approved by CEN on 17 December 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 736-1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Types of valves related to design . 4
4.1 Basic types . 4
4.1.1 General . 4
4.1.2 Gate valve . 4
4.1.3 Globe valve . 4
4.1.4 Plug and ball valve . 4
4.1.5 Butterfly valve and eccentric plug valve . 5
4.1.6 Diaphragm valve. 5
4.2 Examples of basic types . 7
5 Types of valves related to function . 8
5.1 General . 8
5.2 Isolating valve . 8
5.3 Regulating valve . 8
5.4 Control valve . 8
5.5 Safety valve . 8
5.6 Bursting disc safety device . 8
5.7 Check valve . 9
5.8 Diverting valve . 9
5.9 Mixing valve . 9
5.10 Automatic steam trap . 9
5.11 Bleed valve . 9
Bibliography . 10
European foreword
This document (EN 736-1:2018) has been prepared by Technical Committee CEN/TC 69 “Industrial
valves”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2018 and conflicting
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.