ISO/IEC 22051:2002 specifies the physical and magnetic characteristics of magnetic tape cartridges, using magnetic tape 12,65 mm wide so as to provide physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format, thereby allowing data interchange between drives by means of such cartridges. The linearly recorded format, called Super Digital Linear Tape 1 (SDLT 1), has 448 tracks. It uses a combination of magnetic and optical technologies known as Laser-Guided Magnetic Recording (LGMR). The back surface of the tape presents optically detected servo marks. The format is derived from the DLT Format. It provides for a capacity of 110 Gbytes of uncompressed user data, or typically 220 Gbytes of compressed user data. Together with a standard for volume and file structure this document provides for full data interchange between data processing systems.

  • Standard
    59 pages
    English language
    sale 15% off

ISO/IEC 22050:2002 specifies the physical and magnetic characteristics of magnetic tape cartridges, using magnetic tape 12,65 mm wide so as to provide physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format, thereby allowing data interchange between drives by means of such cartridges. The linearly recorded format, called Ultrium-1, has 384 tracks. It uses a timing based servo for improved track following. The format supports variable length Logical Records, high speed search, and the use of a registered algorithm for data compression. ISO/IEC 22050:2002 specifies four types of cartridges depending on the length of tape contained in the case. These four types are referred to as Type A, Type B, Type C and Type D; their nominal uncompressed capacity is 100 Gbytes, 50 Gbytes, 30 Gbytes and 10 Gbytes, respectively. Together with a standard for volume and file structure this document provides for full data interchange between data processing systems.

  • Standard
    128 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format called VXA-1, and thereby allowing data interchange between drives by means of such magnetic tape cartridges. This International Standard specifies three types depending on the length of magnetic tape contained in the case, referred to as Type A, Type B and Type C. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge. If compression is used with this format, it shall be according to International Standard ISO/IEC 15200.

  • Standard
    78 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of magnetic tape cassettes, using magnetic tape 12,65 mm wide so as to provide physical interchange of such cassettes between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format, called Digital Tape Format-2 (DTF-2), thereby allowing data interchange between drives by means of such cassettes. The format supports variable length Logical Records, high-speed search, and the use of a registered algorithm for data compression. This International Standard specifies two sizes of cassette. For the purposes of this International Standard the larger cassette is referred to as Type L, and the smaller as Type S. Together with a standard for volume and file structure, e.g. International Standard ISO 1001, this International Standard provides for full data interchange between data processing systems.

  • Standard
    100 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format called MammothTape-2, and thereby allowing data interchange between drives by means of such magnetic tape cartridges. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge.

  • Standard
    82 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge containing a memory chip to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format - called Advanced Intelligent Tape No.2 with Memory In Cartridge (AIT-2 with MIC) - thereby allowing data interchange between drives by means of such magnetic tape cartridges. The System Log are recorded in the MIC. This International Standard specifies two types of cartridge depending on the thickness of the magnetic tape contained in the case. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge.

  • Standard
    95 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge containing a memory chip to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format - called Advanced Intelligent Tape No. 1 with Memory In Cartridge (AIT-1 with MIC) - thereby allowing data interchange between drives by means of such magnetic tape cartridges. The System Log is recorded in the MIC. This International Standard specifies two types of cartridge depending on the thickness of the magnetic tape contained in the case. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge.

  • Standard
    105 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format - called Digital Data Storage 4 (DDS-4) - thereby allowing data interchange between drives by means of such magnetic tape cartridges. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specifications of the structure and labelling of the information on the interchanged cartridge. Under information interchange circumstances in which a processing algorithm, e.g. for lossless data compression as specified in ISO/IEC 11558, is applied to the host data prior to recording on the tape and a complementary reprocessing algorithm is applied after the data is read from the tape, agreement upon these by the interchange parties is also required.

  • Standard
    102 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of a magnetic tape cartridge, using a magnetic tape 12,7 mm wide, so as to provide physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format known as Parallel Serpentine, thereby allowing data interchange between drives by means of such cartridges. The format supports variable length Logical Records, high speed search, and the use of the algorithm for data compression specified in International Standard ISO/IEC 15200. Information interchange between systems also requires, at a minimum, agreement between the interchange parties upon the interchange code(s) and the specification of the structure and labelling of the information on the interchanged cartridge. Together with a standard for volume and file structure, e.g. International Standard ISO 1001, this International Standard provides for full data interchange between data processing systems.

  • Standard
    75 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of a 12,7 mm wide, 208-track magnetic tape cartridge, to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, a format - called Digital Linear Tape 6 (DLT 6) - and a recording method, thereby allowing data interchange between drives. Together with a labelling standard, for instance International Standard ISO 1001 for Magnetic Tape Labelling, it allows full data interchange by means of such magnetic tape cartridges.

  • Standard
    55 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of a 12,7 mm wide, 208-track magnetic tape cartridge, to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, a format - called Digital Linear Tape 5 (DLT 5) - and a recording method, thereby allowing data interchange between drives. Together with a labelling standard, for instance International Standard ISO 1001 for Magnetic Tape Labelling, it allows full data interchange by means of such magnetic tape cartridges.

  • Standard
    55 pages
    English language
    sale 15% off

This International Standard specifies the physical and magnetic characteristics of a 12,7 mm wide, 128-track magnetic tape cartridge, to enable physical interchangeability of such cartridges between drives. It also specifies the quality of the recorded signals, a format - called Digital Linear Tape 3 Extended (DLT 3-XT) - and a recording method, thereby allowing data interchange between drives. Together with a labelling standard, for instance International Standard ISO 1001 for Magnetic Tape Labelling, it allows full data interchange by means of such magnetic tape cartridges.

  • Standard
    53 pages
    English language
    sale 15% off

This International Standard specifies the media characteristics, the recorded tape format and file structure requirements to enable information interchange between information processing systems using 19,0 mm wide magnetic tape and cassette conforming to IEC 61016 Section 2.

  • Standard
    78 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable physical interchangeability of such cartridges between drives and specifies the quality of the recorded signals, the recording method and the recorded format.

  • Standard
    98 pages
    English language
    sale 15% off

Describes the physical and magnetic characteristics of a magnetic tape cartridge, using magnetic tape 12,65 mm wide, so as to provide physical interchangeability of such cartridges. Specifies the quality of the recorded signals, the recording method and the recorded format.

  • Standard
    105 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics of a 12,7 mm wide, 128-track magnetic tape cartridge, to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, a format, called Digital Linear Tape 3 (DLT 3), and a recording method.

  • Standard
    54 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics of a 12,7 mm wide, 112-track magnetic tape cartridge, to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, a format - called Digital Linear Tape 2 (DLT2) - and a recording method. Together with a labelling standard, e.g. ISO 1001, it allows full data interchange by means of such magnetic tape cartridges.

  • Standard
    55 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics of 12,7 mm wide, 36-track magnetic tape cartridges to enable interchangeabilty of such cartridges.

  • Standard
    71 pages
    English language
    sale 15% off

Cancels and replaces the first edition (1988). Specifies the physical and magnetic characteristics of a 12,7 mm wide, 18 track magnetic tape cartridge to enable interchangeability of such cartridges. Also specifies the quality of the recorded signals, the format and recording method thus allowing, together with ISO 1001 for magnetic tape labelling, full data interchange by means of such magnetic tape cartridges.

  • Standard
    51 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics. Also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges. Specifies two types of cartridges referred to as type A (magnetic tape of nominal thickness of 13 µm and a nominal length of up to 60,5 m) and type B (magnetic tape of a nominal thickness of 9 µm and a nominal length of up to 92,0 m).

  • Standard
    98 pages
    English language
    sale 15% off

La présente Norme internationale spécifie les caractéristiques physiques et magnétiques d'une cartouche à bande magnétique de 3,81 mm de large, dans le but de permettre l'interchangeabilité de telles cartouches. Elle spécifie également la qualité des signaux enregistrés, le format enregistré et la méthode d'enregistrement, permettant ainsi l'échange de données entre lecteurs-enregistreurs au moyen de telles cartouches à bande magnétique. Le format utilisé est connu sous l'appellation : DATA/DAT-DC. La présente Norme internationale spécifie deux types de cartouche. Pour les besoins de la norme, ces cartouches sont référencées comme type A et type B. Pour le type A, la bande magnétique présente une épaisseur nominale de 13 µm et une longueur nominale de 60,5 m. Pour le type B, la bande magnétique présente une épaisseur nominale de 9 µm et une longueur nominale de 92,0 m. L'échange d'information entre systèmes au moyen de la présente Norme internationale exige aussi l'utilisation, au minimum, d'une structure de volumes et de fichiers et d'un code d'échange qui doivent être acceptés par les parties concernées dans l'échange. Il n'est pas du domaine d'application de la présente Norme internationale de spécifier la structure de volumes et de fichiers, ou le code d'échange.

  • Standard
    127 pages
    English language
    sale 15% off

La présente Norme internationale spécifie les caractéristiques physiques et magnétiques d'une cartouche à bande magnétique de 8 mm de large, dans le but de permettre l'interchangeabilité de telles cartouches. Elle spécifie également la qualité des signaux enregistrés, le format et la méthode d'enregistrement, permettant ainsi, avec l'ISO 1001 relative à l'étiquetage des bandes magnétiques, un échange total de données au moyen de telles cartouches à bande magnétique. La présente norme est basée sur l'ISO/CEI 11319, cartouche à bande magnétique de 8 mm de large pour échange d'information -- à enregistrement hélicoïdal --, mais utilisant un enregistrement «double azimut» qui permet de doubler la capacité brute. Le format autorise des enregistrements logiques à longueur variable, une recherche à haute vitesse, et l'utilisation d'un algorithme de compression de données enregistré.

  • Standard
    66 pages
    English language
    sale 15% off

La présente Norme internationale spécifie les caractéristiques physiques et magnétiques d'une cartouche à bande magnétique de 12,7 mm de large, 48 pistes, dans le but de permettre l'interchangeabilité de telles cartouches. Elle spécifie également la qualité des signaux enregistrés, un format appelé Bande Linéaire Numérique 1 (DLT1) et une méthode d'enregistrement. Associée à une norme d'étiquetage, comme par exemple la Norme internationale ISO 1001 pour la structure de volumes et de fichiers des bandes magnétiques, elle permet un échange total de données au moyen de telles cartouches à bande magnétique.

  • Standard
    57 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics to enable interchangeability of the cartridges, the quality of the recorded signals, the format and the recording method, thus allowing, together with ISO 1001, full data interchange, extensions to the transformation of data before it is formatted as in ISO 9661. Cartridge and recording method being identical with those described in ISO 9661. The permissible routes for the flow of data are shown in annex H.

  • Standard
    62 pages
    English language
    sale 15% off

La présente Norme internationale spécifie les caractéristiques physiques et magnétiques d'une cartouche à bande magnétique de 8 mm de large, dans le but de permettre l'interchangeabilité de telles cartouches. Elle décrit également un format et une méthode d'enregistrement, permettant ainsi, avec l'ISO 1001 relative à l'étiquetage des bandes magnétiques, un échange total de données au moyen de telles cartouches à bande magnétique.

  • Standard
    63 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics and also the quality of the recorded signal, the recorded format (DATA/DAT) and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges.

  • Standard
    127 pages
    English language
    sale 15% off

Specifies the physical and magnetic characteristics and also the quality of the recorded signal, the recording method and the recorded format (Digital Data Storage - Data Compression, DDS-DC), thereby allowing data interchange between drives by means of such magnetic tape cartridges.

  • Standard
    102 pages
    English language
    sale 15% off

Includes file structures for data interchange on magnetic tape cassettes. Specifies three systems: 1) basic system; 2) compact system; 3) extended system. Not limited to 3.81 mm magnetic tape cassettes but is also applicable to higher capacity cassettes or cartridges. References: ISO 646; 1001; 3275; 3407.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

Defines the implementation of the 7-bit coded character set and of its 7-bit and 8-bit extentions for the interchange of data on 3.81 mm magnetic tape cassette. References: ISO 646; 2022; 3407.

  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

Prescribes the dimensional, physical and magnetic characteristics and the track layout of a magnetic tape cartridge with a tape width of 6,30 mm (0,25 in) for data interchange between data processing systems using IMFM recording at 252 ftpmm (6 400 ftpi).

  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off

Specifies the quality of recorded signals as well as the track format of a magnetic tape cartridge with a magnetic tape width of 6,30 mm (0,25 inch) using the IMFM method of recording at 252 ftpmm (6 400 ftpi) for data interchange between data processing systems in the start/stop mode.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Outlines the characteristics of a 6.30 mm (0,25 in) magnetic tape cartridges intended for data interchange and physical interchangeability between information processing systems utilizing the ISO 7-bit coded character set (ISO 646), its extensions (ISO 2022) and/or 8-bit character set (ISO 4873). The cartidge is of the twin-hub coplanar type, loaded with 6,30 mm (0,25 in) magnetic tape tor digital recording using the 53 bpmm (1600 bpi) phase-encoding method.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off

Specifies the recording method and a data format for the use of the streaming operating mode for a 7-track format and a 9-track format. Provides for the physical interchange of cartridges between data processing systems. Such a cartridge conforms with ISO 8462 if it meets all requirements for the parts 1 and 2 for the 4-track format and the 9-track format. References: ISO 646, 2022, 4873 and 8462/1.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off

Describes mechanical and functional interchangeability requirements for self-loading cartridges, to be used with reels of 12,7 mm (0.5 in) wide magnetic tape spedified in ISO 1864. Minimum dimensional and functional requirements of the cartridge are given to ensure their interchangeability between tape drives designed for self-loading operation. Different dimensions and features are recommended and optional.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off

Defines the characteristics of a 3.81 mm (0.150 in) magnetic tape cassette to provide data interchange and physical interchangeability between information processing systems utilizing the ISO 7-bit coded character set (ISO 646) and its extensions (ISO 2022). The cassette is of the twin hub coplaner type, loaded with 3.81 mm (0.150 in) wide magnetic tape for digital recording using the 31.5 bits per mm (800 bpi) phase encoding method. The direction of magnetization is in the longitudinal direction of the tape.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off