ASTM C219-20a
(Terminology)Standard Terminology Relating to Hydraulic and Other Inorganic Cements
Standard Terminology Relating to Hydraulic and Other Inorganic Cements
SIGNIFICANCE AND USE
3.1 In definitions of cements, ingredients are cited only when they are inherent to the definition, for example portland-pozzolan cement. For ingredients and their quantity limits, if any, that are permitted or prohibited by a specification for a particular cement, see the applicable specification for that cement.
3.2 In definitions of materials including cements, the method of production is included only if it is inherent to the definition.
3.3 Related terms may be found in other terminology documents such as Terminology C11, Terminology C51, Terminology C125, and ACI 116R.
SCOPE
1.1 This terminology defines terms relating to hydraulic and other inorganic cements, their components, characteristics, properties, and the testing thereof. Some terms may have wider application than just to hydraulic cement.
1.2 See individual standards for terms applicable primarily therein, including meanings that may be more restrictive than those given here, and for explanations and descriptions of terms as they apply to those standards.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: C219 − 20a
Standard Terminology Relating to
1
Hydraulic and Other Inorganic Cements
This standard is issued under the fixed designation C219; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* C595/C595MSpecification for Blended Hydraulic Cements
C1328/C1328MSpecification for Plastic (Stucco) Cement
1.1 Thisterminologydefinestermsrelatingtohydraulicand
C1329/C1329MSpecification for Mortar Cement
other inorganic cements, their components, characteristics,
C1437Test Method for Flow of Hydraulic Cement Mortar
properties,andthetestingthereof.Sometermsmayhavewider
3
2.2 ACI Document:
application than just to hydraulic cement.
ACI 116RCement and Concrete Terminology
1.2 See individual standards for terms applicable primarily
therein, including meanings that may be more restrictive than
3. Significance and Use
those given here, and for explanations and descriptions of
3.1 In definitions of cements, ingredients are cited only
terms as they apply to those standards.
when they are inherent to the definition, for example portland-
1.3 This standard does not purport to address all of the
pozzolan cement. For ingredients and their quantity limits, if
safety concerns, if any, associated with its use. It is the
any, that are permitted or prohibited by a specification for a
responsibility of the user of this standard to establish appro-
particular cement, see the applicable specification for that
priate safety, health, and environmental practices and deter-
cement.
mine the applicability of regulatory limitations prior to use.
3.2 In definitions of materials including cements, the
1.4 This international standard was developed in accor-
method of production is included only if it is inherent to the
dance with internationally recognized principles on standard-
definition.
ization established in the Decision on Principles for the
3.3 Related terms may be found in other terminology
Development of International Standards, Guides and Recom-
documents such as Terminology C11, Terminology C51, Ter-
mendations issued by the World Trade Organization Technical
minology C125, and ACI116R.
Barriers to Trade (TBT) Committee.
2. Referenced Documents 4. Terminology
2
2.1 ASTM Standards:
addition, n—a material that is interground or blended in
C11Terminology Relating to Gypsum and Related Building
limited amounts into a hydraulic cement during manufac-
Materials and Systems
ture.
C51Terminology Relating to Lime and Limestone (as used
DISCUSSION—Two classes of additions are recognized as defined
by the Industry) below.
C114Test Methods for Chemical Analysis of Hydraulic
functional addition, n—anadditionintroducedtomodifyone
Cement
or more properties of a hydraulic cement.
C230/C230MSpecification for Flow Table for Use in Tests
processing addition, n—an addition introduced to aid in the
of Hydraulic Cement
manufacture or handling, or both, of a hydraulic cement.
C125Terminology Relating to Concrete and Concrete Ag-
gregates air content, n—offreshlymixedmortarthevolumeofair(and
C294Descriptive Nomenclature for Constituents of Con- other gases) in mortar, expressed as a percentage of total
crete Aggregates volume of mortar.
air-entraining addition, n—a functional addition that will
1
ThisterminologyisunderthejurisdictionofASTMCommitteeC01onCement
entrain air in mortar or concrete.
and is the direct responsibility of Subcommittee C01.91 on Terminology.
Current edition approved Aug. 1, 2020. Published August 2020. Originally
air-entraining hydraulic cement, n—a hydraulic cement
approved in 1948. Last previous edition approved in 2020 as C219–20. DOI:
containing an air-entraining addition in such amount as to
10.1520/C0219-20A.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on Available from American Concrete Institute (ACI), 38800 Country Club Dr.,
the ASTM website. Farmington Hills, MI 48331-3439, http://www.concrete.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
C219 − 20a
cause air to be entrained in mortar within specified limits calibration, n—of measuring instrument, a process that, under
when measure
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: C219 − 20 C219 − 20a
Standard Terminology Relating to
1
Hydraulic and Other Inorganic Cements
This standard is issued under the fixed designation C219; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This terminology defines terms relating to hydraulic and other inorganic cements, their components, characteristics, properties,
and the testing thereof. Some terms may have wider application than just to hydraulic cement.
1.2 See individual standards for terms applicable primarily therein, including meanings that may be more restrictive than those
given here, and for explanations and descriptions of terms as they apply to those standards.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of
regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
C11 Terminology Relating to Gypsum and Related Building Materials and Systems
C51 Terminology Relating to Lime and Limestone (as Used by the Industry)
C114 Test Methods for Chemical Analysis of Hydraulic Cement
C114C230/C230M Test Methods for Chemical Analysis Specification for Flow Table for Use in Tests of Hydraulic Cement
C125 Terminology Relating to Concrete and Concrete Aggregates
C294 Descriptive Nomenclature for Constituents of Concrete Aggregates
C595/C595M Specification for Blended Hydraulic Cements
C1328/C1328M Specification for Plastic (Stucco) Cement
C1329/C1329M Specification for Mortar Cement
C1437 Test Method for Flow of Hydraulic Cement Mortar
3
2.2 ACI Document:
ACI 116R Cement and Concrete Terminology
3. Significance and Use
3.1 In definitions of cements, ingredients are cited only when they are inherent to the definition, for example portland-pozzolan
1
This terminology is under the jurisdiction of ASTM Committee C01 on Cement and is the direct responsibility of Subcommittee C01.91 on Terminology.
Current edition approved April 1, 2020Aug. 1, 2020. Published April 2020August 2020. Originally approved in 1948. Last previous edition approved in 20192020 as
C219 – 19a.C219 – 20. DOI: 10.1520/C0219-20.10.1520/C0219-20A.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Available from American Concrete Institute (ACI), 38800 Country Club Dr., Farmington Hills, MI 48331-3439, http://www.concrete.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
C219 − 20a
cement. For ingredients and their quantity limits, if any, that are permitted or prohibited by a specification for a particular cement,
see the applicable specification for that cement.
3.2 In definitions of materials including cements, the method of production is included only if it is inherent to the definition.
3.3 Related terms may be found in other terminology documents such as Terminology C11, Terminology C51, Terminology C125,
and ACI 116R.
4. Terminology
addition, n—a material that is interground or blended in limited amounts into a hydraulic cement during manufacture.
DISCUSSION—
Two classes of additions are recognized as defined below.
functional addition, n—an addition introduced to modify one or more properties of a hydraulic cement.
processing addition, n—an addition introduced to aid in the manufacture or handling, or both, of a hydraulic cement.
air content, n—of freshly mixed mortar the volume of air (and other gases) in mortar, expressed as a percentage of total volume
of mortar.
air-entraining addition, n—a functional addition that will entrain air in m
...
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C219 − 20a
Standard Terminology Relating to
1
Hydraulic and Other Inorganic Cements
This standard is issued under the fixed designation C219; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* C595/C595M Specification for Blended Hydraulic Cements
C1328/C1328M Specification for Plastic (Stucco) Cement
1.1 This terminology defines terms relating to hydraulic and
C1329/C1329M Specification for Mortar Cement
other inorganic cements, their components, characteristics,
C1437 Test Method for Flow of Hydraulic Cement Mortar
properties, and the testing thereof. Some terms may have wider
3
2.2 ACI Document:
application than just to hydraulic cement.
ACI 116R Cement and Concrete Terminology
1.2 See individual standards for terms applicable primarily
therein, including meanings that may be more restrictive than
3. Significance and Use
those given here, and for explanations and descriptions of
3.1 In definitions of cements, ingredients are cited only
terms as they apply to those standards.
when they are inherent to the definition, for example portland-
1.3 This standard does not purport to address all of the
pozzolan cement. For ingredients and their quantity limits, if
safety concerns, if any, associated with its use. It is the
any, that are permitted or prohibited by a specification for a
responsibility of the user of this standard to establish appro-
particular cement, see the applicable specification for that
priate safety, health, and environmental practices and deter-
cement.
mine the applicability of regulatory limitations prior to use.
3.2 In definitions of materials including cements, the
1.4 This international standard was developed in accor-
method of production is included only if it is inherent to the
dance with internationally recognized principles on standard-
definition.
ization established in the Decision on Principles for the
3.3 Related terms may be found in other terminology
Development of International Standards, Guides and Recom-
documents such as Terminology C11, Terminology C51, Ter-
mendations issued by the World Trade Organization Technical
minology C125, and ACI 116R.
Barriers to Trade (TBT) Committee.
2. Referenced Documents
4. Terminology
2
2.1 ASTM Standards:
addition, n—a material that is interground or blended in
C11 Terminology Relating to Gypsum and Related Building
limited amounts into a hydraulic cement during manufac-
Materials and Systems
ture.
C51 Terminology Relating to Lime and Limestone (as used
DISCUSSION—Two classes of additions are recognized as defined
by the Industry)
below.
C114 Test Methods for Chemical Analysis of Hydraulic
functional addition, n—an addition introduced to modify one
Cement
or more properties of a hydraulic cement.
C230/C230M Specification for Flow Table for Use in Tests
processing addition, n—an addition introduced to aid in the
of Hydraulic Cement
manufacture or handling, or both, of a hydraulic cement.
C125 Terminology Relating to Concrete and Concrete Ag-
gregates air content, n—of freshly mixed mortar the volume of air (and
C294 Descriptive Nomenclature for Constituents of Con- other gases) in mortar, expressed as a percentage of total
crete Aggregates volume of mortar.
air-entraining addition, n—a functional addition that will
1
This terminology is under the jurisdiction of ASTM Committee C01 on Cement
entrain air in mortar or concrete.
and is the direct responsibility of Subcommittee C01.91 on Terminology.
Current edition approved Aug. 1, 2020. Published August 2020. Originally
air-entraining hydraulic cement, n—a hydraulic cement
approved in 1948. Last previous edition approved in 2020 as C219 – 20. DOI:
containing an air-entraining addition in such amount as to
10.1520/C0219-20A.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on Available from American Concrete Institute (ACI), 38800 Country Club Dr.,
the ASTM website. Farmington Hills, MI 48331-3439, http://www.concrete.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
C219 − 20a
cause air to be entrained in mortar within specified limits calibration, n—of measuring instrument, a process that, under
when measured by the prescribed method. specified conditions and following a standard procedure,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.