CEN ISO/TR 15608:2005

Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2005)

ISO/TR 15608:2005 provides a uniform system for grouping of materials for welding purposes. It may also apply to other purposes such as heat treatment, forming, non-destructive testing.
It covers grouping systems for the following standardized materials:
steel;
aluminium and its alloys;
nickel and its alloys;
copper and its alloys;
titanium and its alloys;
zirconium and its alloys;
cast iron.

Schweißen - Richlinien für eine Gruppeneinteilung von metallischen Werkstoffen (ISO/TR 15608:2005)

Dieser Technische Bericht enthält eine Gruppeneinteilung von Werkstoffen zum Schweißen. Er kann auch für andere Zwecke wie Wärmebehandlung, Umformen, zerstörungsfreie Prüfung, angewendet werden.
Dieser Technische Bericht enthält eine Gruppeneinteilung für die nachstehend genannten genormten Werkstoffe:
-   Stahl;
-   Aluminium und seine Legierungen;
-   Nickel und seine Legierungen;
-   Kupfer und seine Legierungen;
-   Titan und seine Legierungen;
-   Zirkonium und seine Legierungen;
Gusseisen

Soudage - Lignes directrices pour un système de groupement des matériaux métalliques (ISO/TR 15608:2005)

L'ISO/TR 15608:2005 fournit un système uniforme de groupement des matériaux en vue du soudage. Il peut aussi s'appliquer à d'autres utilisations telles que le traitement thermique, le formage, les contrôles non destructifs.
Il traite des systèmes de groupement relatifs aux matériaux normalisés suivants:
l'acier;
l'aluminium et ses alliages;
le nickel et ses alliages;
le cuivre et ses alliages;
le titane et ses alliages;
le zirconium et ses alliages;
la fonte.

Varjenje – Smernice za razvrščanje kovinskih materialov v skupine (ISO/TR 15608:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Oct-2005
• Withdrawal Date: 02-Apr-2013
• ICS: 25.160.01 - Welding, brazing and soldering in general
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 03-Apr-2013
• Completion Date: 03-Apr-2013
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST-TP CEN ISO/TR 15608:2006 - Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2005)

Relations

• Replaces: CR ISO 15608:2000 - Welding - Guidelines for a metallic material grouping system (ISO/TR 15608:2000)
• Effective Date: 22-Dec-2008
• Replaced By: CEN ISO/TR 15608:2013 - Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2013)
• Effective Date: 10-Apr-2013

Standards Content (Sample)

SLOVENSKI oSIST prCEN ISO/TR
15608:2005

PREDSTANDARD
maj 2005
Varjenje – Smernice za sistem razvrščanja kovinskih materialov v skupine
(ISO/DTR 15608:2005)
Welding - Guidelines for a metallic material grouping system (ISO/DTR 15608:2005)
ICS 25.160.10 Referenčna številka
oSIST prCEN ISO/TR 15608:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

TECHNICAL REPORT
FINAL DRAFT
prCEN ISO/TR 15608
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
March 2005
ICS 25.160.01
English version
Welding - Guidelines for a metallic material grouping system
(ISO/DTR 15608:2005)
Soudage - Lignes directrices pour un système de
groupement des matériaux métalliques (ISO/DTR
15608:2005)
This draft Technical Report is submitted to CEN members for Technical Committee Approval. It has been drawn up by the Technical
Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a Technical Report.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prCEN ISO/TR 15608:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

prCEN ISO/TR 15608:2005 (E)






Foreword



This document (prCEN ISO/TR 15608:2005) has been prepared by Technical Committee
CEN/TC 121 "Welding", the secretariat of which is held by DIN, in collaboration with Technical
Committee ISO/TC 44 "Welding and allied processes".

This document is currently submitted to the parallel Technical Committee Approval.


2

---------------------- Page: 3 ----------------------

TECHNICAL ISO/TR
REPORT 15608
Second edition
2005-10-15

Welding — Guidelines for a metallic
materials grouping system
Soudage — Lignes directrices pour un système de groupement des
matériaux métalliques




Reference number
ISO/TR 15608:2005(E)
©
ISO 2005

---------------------- Page: 4 ----------------------

ISO/TR 15608:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 5 ----------------------

ISO/TR 15608:2005(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope.1
2 Grouping system for steels .1
3 Grouping system for aluminium and aluminium alloys.4
4 Grouping system for
...

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 15608:2006
01-marec-2006
1DGRPHãþD
SIST CR ISO 15608:2001
9DUMHQMH±6PHUQLFH]DUD]YUãþDQMHNRYLQVNLKPDWHULDORYYVNXSLQH,6275

Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2005)
Schweißen - Richlinien für eine Gruppeneinteilung von metallischen Werkstoffen
(ISO/TR 15608:2005)
Soudage - Lignes directrices pour un systeme de groupement des matériaux métalliques
(ISO/TR 15608:2005)
Ta slovenski standard je istoveten z: CEN ISO/TR 15608:2005
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST-TP CEN ISO/TR 15608:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN ISO/TR 15608:2006

---------------------- Page: 2 ----------------------

SIST-TP CEN ISO/TR 15608:2006
TECHNICAL REPORT
CEN ISO/TR 15608
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
October 2005
ICS 25.160.01 Supersedes CR ISO 15608:2000
English Version
Welding - Guidelines for a metallic materials grouping system
(ISO/TR 15608:2005)
Soudage - Lignes directrices pour un système de Schweißen - Richlinien für eine Gruppeneinteilung von
groupement des matériaux métalliques (ISO/TR metallischen Werkstoffen (ISO/TR 15608:2005)
15608:2005)
This Technical Report was approved by CEN on 4 July 2005. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 15608:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN ISO/TR 15608:2006

CEN ISO/TR 15608:2005 (E)





Foreword


This document (CEN ISO/TR 15608:2005) has been prepared by Technical Committee
CEN/TC 121, "Welding" the secretariat of which is held by DIN, in collaboration with Technical
Committee ISO/TC 44 "Welding and allied processes".

This document supersedes CR ISO 15608:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to announce this CEN Technical Specification: Austria,
Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


2

---------------------- Page: 4 ----------------------

SIST-TP CEN ISO/TR 15608:2006


TECHNICAL ISO/TR
REPORT 15608
Second edition
2005-10-15

Welding — Guidelines for a metallic
materials grouping system
Soudage — Lignes directrices pour un système de groupement des
matériaux métalliques




Reference number
ISO/TR 15608:2005(E)
©
ISO 2005

---------------------- Page: 5 ----------------------

SIST-TP CEN ISO/TR 15608:2006
ISO/TR 15608:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2005 – All rights reserved

---------------------- Page: 6 ----------------------

SIST-TP CEN ISO/TR 15608:20
...