prEN 3638
(Main)Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 mm ≤ a ≤ 10 mm
Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates - 0,5 mm ≤ a ≤ 10 mm
This document specifies the requirements relating to:
Heat-resisting alloy X6NiCrTiMoV26-15 (1.4980)
Consumable electrode remelted
Solution treated and precipitation treated
Sheets, strips and plates
0,5 ≤ a ≤ 10 mm
for aerospace applications.
W.nr: 1.4980.
ASD-STAN designation: FE-PA2601.
Luft- und Raumfahrt - Hochwarmfeste Legierung X6NiCrTiMoV26-15 (1.4980) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Bleche, Bänder und Platten - 0,5 mm ≤ a ≤ 10 mm
No Scope available
Série aérospatiale - Alliage résistant à chaud X6NiCrTiMoV26-15 (1.4980) - Refondu à l‘électrode consommable - Mis en solution et précipité - Tôles, bandes et plaques - 0,5 mm ≤ a ≤ 10 mm
Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud X6NiCrTiMoV26-15 (1.4980)
Refondu à l‘électrode consommable
Mis en solution et précipité
Tôles, bandes et plaques
0,5 ≤ a ≤ 10 mm
pour les applications aérospatiales.
W.nr : 1.4980.
Désignation ASD-STAN : FE-PA2601.
Aeronavtika - Toplotno odporna zlitina X6NiCrTiMoV26-15 (1.4980) - Pretaljeno s talilno elektrodo - Žarjeno v topilu in utrjeno - Pločevina, trakovi in plošče - 0,5 mm ≤ a ≤ 10 mm
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Aeronavtika - Toplotno odporna zlitina X6NiCrTiMoV26-15 (1.4980) - Pretaljeno s
talilno elektrodo - Žarjeno v topilu in utrjeno - Pločevina, trakovi in plošče - 0,5 mm
≤ a ≤ 10 mm
Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15 (1.4980) - Consumable
electrode remelted - Solution treated and precipitation treated - Sheets, strips and plates
- 0,5 mm ≤ a ≤ 10 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung X6NiCrTiMoV26-15 (1.4980) - Mit
selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert -
Bleche, Bänder und Platten - 0,5 mm ≤ a ≤ 10 mm
Série aérospatiale - Alliage résistant à chaud X6NiCrTiMoV26-15 (1.4980) - Élaboré par
électrode consommable - Mis en solution et précipité - Tôles, bandes et plaques - 0,5
mm ≤ a ≤ 10 mm
Ta slovenski standard je istoveten z: prEN 3638
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2024
ICS 49.025.10 Will supersede EN 3638:2007
English Version
Aerospace series - Heat resisting alloy X6NiCrTiMoV26-15
(1.4980) - Consumable electrode remelted - Solution
treated and precipitation treated - Sheets, strips and
plates - 0,5 mm ≤ a ≤ 10 mm
Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X6NiCrTiMoV26-15 (1.4980) - Élaboré par électrode X6NiCrTiMoV26-15 (1.4980) - Mit selbstverzehrender
consommable - Mis en solution et précipité - Tôles, Elektrode umgeschmolzen - Lösungsgeglüht und
bandes et plaques - 0,5 mm ≤ a ≤ 10 mm ausgelagert - Bleche, Bänder und Platten - 0,5 mm ≤ a ≤
10 mm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3638:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
European foreword
This document (prEN 3638:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.