EN ISO 9556:2001

Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989)

The method is applicable to carbon contents between 0,003% (m/m) and 4,5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. The annexes give additional information on the international co-operative tests, a graphical representation of precision data and features of induction furnaces and carbon analysers.

Stahl und Eisen - Bestimmung des Gesamtkohlenstoffgehalts - Verfahren mit Infrarotabsorption nach Verbrennung im Induktionsofen (ISO 9556:1989)

Diese Internationale Norm legt ein Verfahren mit Infrarotabsorption nach Verbrennung im Induktionsofen zur Bestimmung des Gesamtkohlenstoffgehalts in Stahl und Eisen fest.
Das Verfahren ist auf Kohlenstoffgehalte zwischen 0,003 % (m/m) und 4,5 % (m/m) anwendbar.

Aciers et fontes - Dosage du carbone total - Méthode par absorption dans l'infrarouge après combustion dans un four à induction (ISO 9556:1989)

La présente Norme internationale prescrit une méthode de dosage du carbone total dans les aciers et les fontes par absorption dans l'infrarouge après combustion dans un four à induction.  La méthode est applicable aux teneurs en carbone comprises entre 0,003 % (m/m) et 4,5 % (m/m).

Jeklo in železo - Določevanje celotnega ogljika - Infrardeča absorpcijska metoda po sežigu v indukcijski peči (ISO 9556:1989)

General Information

• Status: Published
• Publication Date: 19-Jun-2001
• ICS: 77.040.30 - Chemical analysis of metals
• Technical Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Drafting Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 03-Jun-2009
• Completion Date: 03-Jun-2009
• Ref Project: SIST EN ISO 9556:2002 - Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9556:2002
01-september-2002
-HNORLQåHOH]R'RORþHYDQMHFHORWQHJDRJOMLND,QIUDUGHþDDEVRUSFLMVNDPHWRGD
SRVHåLJXYLQGXNFLMVNLSHþL,62
Steel and iron - Determination of total carbon content - Infrared absorption method after
combustion in an induction furnace (ISO 9556:1989)
Stahl und Eisen - Bestimmung des Gesamtkohlenstoffgehalts - Verfahren mit
Infrarotabsorption nach Verbrennung im Induktionsofen (ISO 9556:1989)
Aciers et fontes - Dosage du carbone total - Méthode par absorption dans l'infrarouge
apres combustion dans un four a induction (ISO 9556:1989)
Ta slovenski standard je istoveten z: EN ISO 9556:2001
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
SIST EN ISO 9556:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9556:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 9556:2002
EUROPEAN STANDARD
EN ISO 9556
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 07.008.01
English version
Steel and iron - Determination of total carbon content - Infrared
absorption method after combustion in an induction furnace
(ISO 9556:1989)
Aciers et fontes - Dosage du carbone total - Méthode par Stahl und Eisen - Bestimmung des
absorption dans l'infrarouge après combustion dans un four Gesamtkohlenstoffgehalts - Verfahren mit
à induction (ISO 9556:1989) Infrarotabsorption nach Verbrennung im Induktionsofen
(ISO 9556:1989)
This European Standard was approved by CEN on 11 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9556:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9556:2002
Page 2
EN ISO 9556:2001
CORRECTED 2002-01-02
Foreword
The text of the International Standard from Technical Committee ISO/TC 17 "Steel" of the
International Organization for Standardization (ISO) has been taken over as a European
Standard by Technical Committee ECISS/TC 20 "Methods of chemical analysis of ferrous
products", the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by December 2001, and conflicting
national standards shall be withdrawn at the latest by December 2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 9556:1989 has been approved by CEN as a
European Standard without any modification.
NOTE Normative references to International Standards are listed in annex ZA (normative).

---------------------- Page: 4 ----------------------

SIST EN ISO 9556:2002
Page 3
EN ISO 9556:2001
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of -any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO
...