EN ISO 8611-2:2022
(Main)Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2021)
Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2021)
This document specifies the performance requirements to establish nominal loads for new flat pallets.
It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. This document does not apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.
Paletten für den Gütertransport - Flachpaletten - Teil 2: Leistungsanforderungen und Auswahl von Prüfungen (ISO 8611-2:2021)
Dieses Dokument legt die Leistungsanforderungen für die Ermittlung der Nennlasten neuer Flachpaletten fest.
Außerdem wird festgelegt, welche Prüfungen für neue Flachpaletten bei verschiedenen Handhabungen erforderlich sind und welche Leistungsanforderungen in Prüfungen mit Auflasten zu erreichen sind. Dieses Dokument gilt nicht für Paletten mit festem Aufbau oder für formstabile, selbsttragende Behälter, die mechanisch an den Paletten befestigt werden können und zur Festigkeit der Paletten beitragen.
Palettes pour la manutention - Palettes plates - Partie 2: Exigences de performance et sélection des essais (ISO 8611-2:2021)
Le présent document spécifie les exigences de performance permettant d’établir les charges nominales pour des palettes plates neuves.
Il spécifie également les essais nécessaires pour des palettes plates neuves dans diverses conditions de manutention et les exigences de performance pour des essais avec charges utiles. Le présent document ne s’étend pas aux palettes à superstructure fixe ou à conteneur autoportant rigide pouvant être fixés mécaniquement à la palette et contribuant à sa résistance.
Palete za ravnanje z materiali - Ravne palete - 2. del: Zahtevane lastnosti in izbira preskusa (ISO 8611-2:2021)
Ta dokument določa zahtevane lastnosti za določanje nazivne obremenitve za nove ravne palete. Določa tudi zahtevane preskuse za nove ravne palete v različnih delovnih okoljih in zahtevane lastnosti za preskuse z obremenitvijo. Ta dokument se ne uporablja za palete s fiksno nadgradnjo ali za trdne, samonosilne posode, ki se lahko mehanično pritrdijo na paleto in pripomorejo k trdnosti palete.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2022
Nadomešča:
SIST EN ISO 8611-2:2013
SIST EN ISO 8611-2:2013/A1:2017
Palete za ravnanje z materiali - Ravne palete - 2. del: Zahtevane lastnosti in izbira
preskusa (ISO 8611-2:2021)
Pallets for materials handling - Flat pallets - Part 2: Performance requirements and
selection of tests (ISO 8611-2:2021)
Paletten für den Gütertransport - Flachpaletten - Teil 2: Leistungsanforderungen und
Auswahl von Prüfungen (ISO 8611-2:2021)
Palettes pour la manutention - Palettes plates - Partie 2: Exigences de performance et
sélection des essais (ISO 8611-2:2021)
Ta slovenski standard je istoveten z: EN ISO 8611-2:2022
ICS:
55.180.20 Večnamenske palete General purpose pallets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 8611-2
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2022
EUROPÄISCHE NORM
ICS 55.180.20 Supersedes EN ISO 8611-2:2012, EN ISO 8611-
2:2012/A1:2016
English Version
Pallets for materials handling - Flat pallets - Part 2:
Performance requirements and selection of tests (ISO
8611-2:2021)
Palettes pour la manutention - Palettes plates - Partie Paletten für den Gütertransport - Flachpaletten - Teil 2:
2: Exigences de performance et sélection des essais Leistungsanforderungen und Auswahl von Prüfungen
(ISO 8611-2:2021) (ISO 8611-2:2021)
This European Standard was approved by CEN on 5 January 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8611-2:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 8611-2:2022) has been prepared by Technical Committee ISO/TC 51 "Pallets
for unit load method of materials handling" in collaboration with Technical Committee CEN/TC 261
“Packaging” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2022, and conflicting national standards shall be
withdrawn at the latest by July 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8611-2:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8611-2:2021 has been approved by CEN as EN ISO 8611-2:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 8611-2
Second edition
2021-12
Pallets for materials handling — Flat
pallets —
Part 2:
Performance requirements and
selection of tests
Palettes pour la manutention — Palettes plates —
Partie 2: Exigences de performance et sélection des essais
Reference number
ISO 8611-2:2021(E)
ISO 8611-2:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 8611-2:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test conditions .2
4.1 General . 2
4.2 Wooden pallets . 3
4.3 Metal pallets . 3
4.4 Plastic pallets . 3
4.5 Paper pallets . 3
4.6 Wood-based composite pallets . 3
5 Number of replicates .4
6 Performance requirements . .4
7 Selection of the tests .7
7.1 Intended use . 7
7.2 Handling of goods with racking and stacking . 8
7.3 Handling of goods with stacking without racking. 8
7.4 Handling of goods without racking or stacking . 8
7.5 Special applications . 8
7.5.1 General . 8
7.5.2 Automatic handling or conveyors . 9
7.5.3 Lifting with slings . 9
7.5.4 Resistance to impact . 9
7.5.5 Friction tests . 9
8 Test load — Nominal load .9
8.1 Strength tests . 9
8.2 Ultimate load, U . 9
8.3 Stiffness tests . . 9
8.4 Nominal load. 9
9 Duration for static stiffness tests .10
10 Number of impacts for dynamic tests .10
11 Test report .10
Annex A (informative) Plots of typical force versus deformation from pallet testsshowing
the deformation of ultimate load, U .11
Bibliography .13
iii
ISO 8611-2:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.