iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TR 15993:2013

(Main)

Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination

Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination

This Technical Report explains the requirements and test methods for marketed and delivered ethanol (E85) automotive fuel according to CEN/TS 15293. It provides background information to judge the (approval of the) final text of the standard and gives guidance and explanations to the producers, blenders, marketers and users of ethanol (E85) automotive fuel.
NOTE 1   This document is directly related to the pending revision of CEN/TS 15293:2011 and will be updated once further publications take place.
NOTE 2   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

Kraftstoffe für Kraftfahrzeuge - Ethanol-Kraftstoff (E85) - Hintergrund der geforderten Parameter und deren jeweiligen Grenzwerte und Bestimmung

Carburants pour automobiles - Essence pour automobile Ethanol (E85) - Informations sur les paramètres requis et leurs limites et détermination respectives

Goriva za motorna vozila - Gorivo etanol (E85) za motorna vozila - Ozadje zahtevanih parametrov in njihovih omejitev ter določb

To tehnično poročilo razlaga zahteve in preskusne metode za trženo in dostavljeno gorivo etanol (E85) za motorna vozila v skladu s standardom CEN/TS 15293 [3]. Zagotavlja dodatne informacije za oceno (odobritve) končnega besedila standarda ter podaja navodila in pojasnila za proizvajalce, pripravljavce mešanic, trgovce in uporabnike goriva etanol (E85) za motorna vozila.

General Information

Status
Withdrawn
Publication Date
12-Feb-2013
Withdrawal Date
20-Mar-2018
ICS
71.080.60 - Alcohols. Ethers
75.160.20 - Liquid fuels
Technical Committee
CEN/TC 19 - Petroleum products, lubricants and related products
Drafting Committee
CEN/TC 19/WG 21 - Specification for unleaded petrol
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
21-Mar-2018
Ref Project
SIST-TP CEN/TR 15993:2013 - Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination

Relations

Replaces
CEN/TR 15993:2010 - Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
Effective Date
08-Jun-2022
Replaced By
CEN/TR 15993:2018 - Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
Effective Date
08-Jun-2022

Buy Standard

TP CEN/TR 15993:2013TP CEN/TR 15993:2013
PreviousNext
Technical report
TP CEN/TR 15993:2013
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15993:2013
01-april-2013
1DGRPHãþD
SIST-TP CEN/TR 15993:2010
*RULYD]DPRWRUQDYR]LOD*RULYRHWDQRO ( ]DPRWRUQDYR]LOD2]DGMH
]DKWHYDQLKSDUDPHWURYLQQMLKRYLKRPHMLWHYWHUGRORþE
Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters
required and their respective limits and determination
Kraftstoffe für Kraftfahrzeuge - Ethanol-Kraftstoff (E85) - Hintergrund für die geforderten
Parameter und deren jeweiligen Grenzwerte und Bestimmung
Carburants pour automobiles - Essence pour automobile Ethanol (E85) - Informations
sur les paramètres requis et leurs limites et détermination respectives
Ta slovenski standard je istoveten z: CEN/TR 15993:2013
ICS:
71.080.60 Alkoholi. Etri Alcohols. Ethers
75.160.20 7HNRþDJRULYD Liquid fuels
SIST-TP CEN/TR 15993:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 15993:2013

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 15993:2013


TECHNICAL REPORT
CEN/TR 15993

RAPPORT TECHNIQUE

TECHNISCHER BERICHT
February 2013
ICS 75.160.20; 71.080.60 Supersedes CEN/TR 15993:2010
English Version
Automotive fuels - Ethanol (E85) automotive fuel - Background
to the parameters required and their respective limits and
determination
Carburants pour automobiles - Essence pour automobile Kraftstoffe für Kraftfahrzeuge - Ethanol-Kraftstoff (E85) -
Ethanol (E85) - Informations sur les paramètres requis et Hintergrund der geforderten Parameter und deren
leurs limites et détermination respectives jeweiligen Grenzwerte und Bestimmung


This Technical Report was approved by CEN on 21 May 2011. It has been drawn up by the Technical Committee CEN/TC 19.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15993:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 15993:2013
CEN/TR 15993:2013 (E)
Contents Page
Foreword . 3
1 Scope . 4
2 Summary of the ethanol fuel (E85) taskforce work . 4
3 Record of the work to date . 4
3.1 Context . 4
3.2 The Ethanol (E85) automotive fuel Task Force . 5
3.3 Planning. 7
4 The draft ethanol (E85) automotive fuel specification . 8
4.1 Parameters included . 8
4.2 Considerations on the parameters . 9
4.2.1 Denaturants . 9
4.2.2 RON MON . 9
4.2.3 Ethanol content and higher alcohols . 10
4.2.4 Vapour pressure . 12
4.2.5 Density . 13
4.2.6 Sulfur content .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15491:2021(Main)
Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
SIST EN 15491:2022

This document specifies a method for determining the total acidity, calculated as acetic acid, of ethanol to be used in petrol blends. It is applicable to ethanol having total acid contents of between 0,003 % (m/m) and 0,015 % (m/m).
NOTE   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction and the volume fraction, respectively.
WARNING - Use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to take appropriate measures to ensure the safety and health of personnel prior to the application of the document, and to fulfil statutory and regulatory restrictions for this purpose.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15993:2018(Main)
Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
SIST-TP CEN/TR 15993:2018

This Technical Report explains the requirements and test methods for marketed and delivered ethanol (E85) automotive fuel according to EN 15293. It provides background information on the final text of the draft European standard and gives guidance and explanations to the producers, blenders, marketers and users of ethanol (E85) automotive fuel.
It is applicable to ethanol (E85) for use in spark ignition engine vehicles designed to run on ethanol (E85). Ethanol (E85) is a mixture of nominally 85 % ethanol and 15 % petrol, but it also includes the possibility of having different 'seasonal grades' containing 50 % or more ethanol.
NOTE 1   This document is directly related to prEN 15293:2017 and will be updated if further revisions to the standard take place.
NOTE 2   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

  • Technical report
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16136:2015(Main)
Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
SIST EN 16136:2015

This European Standard specifies a method based on inductively coupled plasma optical emission spectrometry (ICP OES) for the determination of manganese content from about 0,5 mg/l to about 7,5 mg/l and of iron content from about 1,4 mg/l to about 6,0 mg/l in unleaded petrol containing up to 3,7 % (m/m) oxygen.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
NOTE 1   Manganese as MMT and iron as ferrocene are added to petrol to increase anti-knock properties.
NOTE 2   Solutions of MMT in petrol are unstable when exposed to light. Low and erratic results are expected if petrol samples are exposed to light prior the analysis.
Iron and manganese contents higher than 6,0 mg/l and 7,5 mg/l respectively may be measured after preliminary dilution of the sample with a suitable solvent. However, the precision has not been established for such a procedure. Further work regarding automotive ethanol (E85) fuel is on-going in CEN.
NOTE 3   For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction (µ) and the volume fraction (φ) of a material respectively.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15376:2014(Main)
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
SIST EN 15376:2014

This European Standard specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228 [5]. It is applicable to ethanol used for blending at all levels up to and including 85 % (V/V).
NOTE   For the purposes of this document, the term “% (m/m)” and “% (V/V)” are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15492:2012(Main)
Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
SIST EN 15492:2012

This European Standard specifies an ion chromatographic (IC) method for the determination of inorganic chloride content in ethanol from about 1 mg/kg to about 30 mg/kg and of sulfate content in ethanol from about 1 mg/kg to about 20 mg/kg.
NOTE   Sulfate content can be determined from 0,5 mg/kg to 1,0 mg/kg. However, the precision was not established as no samples with sulfate content in this range were included in the interlaboratory test.
WARNING - Use of this method may involve hazardous equipment, materials and operations. This method does not purport to address to all of the safety problems associated with its use, but it is the responsibility of the user to search and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15490:2007(Main)
Ethanol as a blending component for petrol - Determination of pHe
SIST EN 15490:2007

This European Standard describes a procedure for the determination of acid strength, as a pHe value, of ethanol to be used as a blend component for gasoline.
NOTE   For the purposes of this European Standard, the term “% (V/V)” is used to represent the volume fraction.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15487:2007(Main)
Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
SIST EN 15487:2007

This standard specifies a procedure for the determination of phosphorus content measured as orthophosphate, in ethanol from 0,15 mg/l to 1,50 mg/l by ammonium molybdate spectrometric method. The phosphorus content is determined in aqueous solution after dissolution of the evaporation residue of the ethanol sample.
WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15484:2007(Main)
Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
SIST EN 15484:2007

This standard specifies a potentiometric method for the determination of inorganic chloride content in ethanol from 4 mg/l to 30 mg/l. The chloride content is determined in aqueous solution after dissolution of the evaporation residue of the ethanol sample.
WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15485:2007(Main)
Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
SIST EN 15485:2007

This document specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of ethanol from 7 mg/kg to 20 mg/kg.
NOTE   For the purposes of this European Standard, the term "% (m/m)" is used to represent the mass fraction of a material.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15486:2007(Main)
Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
SIST EN 15486:2007

This document specifies an ultraviolet (UV) fluorescence test method for the determination of the sulfur content of ethanol from 5 mg/kg to 20 mg/kg. Other products may be analysed and higher sulfur contents may be determined according to this test method, however, no precision data for products other than ethanol and for results outside the specified range have been established for this document. Halogens interfere with this detection technique at concentrations above approximately 3 500 mg/kg.
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent the mass fraction and the volume fraction of a material respectively.
WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day