EN 1858:2008
(Main)Chimneys - Components - Concrete flue blocks
Chimneys - Components - Concrete flue blocks
This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in system chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.
This standard does not cover products designated wet (W) in conjunction with corrosion class 3.
The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block).
This European Standard also applies to storey-height and flue blocks reinforced for handling.
NOTE Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.
Abgasanlagen - Bauteile - Betonformblöcke
Diese Europäische Norm legt die Anforderungen an die Werkstoffe, die Maße sowie die Leistungsanforderungen
an Formblöcke aus Fertigbeton, wie in Abschnitt 3 festgelegt, zur Verwendung in
Systemabgasanlagen fest. Die Formblöcke können einschalig oder mehrschalig sein. Diese Norm gilt nicht für
Formblöcke, die hinterlüftet sind.
Diese Norm gilt nicht für Produkte, die mit feucht (W) gekennzeichnet sind in Verbindung mit Korrosionsbeständigkeitsklasse
3.
Diese Norm beschreibt außerdem einen Typ von Formblöcken, der mit der Schichthöhe des Mauerwerkes
maßlich abgestimmt ist und als Typ B (Verbundblock) bezeichnet wird.
Diese Europäische Norm gilt außerdem für geschosshohe und mit einer Transportbewehrung versehene
Formblöcke.
ANMERKUNG Sämtliche Verweise auf den Begriff „Formblöcke“ bedeuten in dieser Norm immer „Formblöcke und ihre
Formstücke“, außer wenn es anders angegeben ist.
Conduits de fumée - Composants - Conduits de fumée simple et multiparois en béton
La présente Norme européenne spécifie les exigences relatives aux matériaux, aux dimensions et aux
performances applicables aux conduits en béton tels que définis à l’Article 3 et constitutifs de systèmes de
conduits de fumée. Les conduits peuvent être à simple paroi ou multiparois. La norme ne s'applique pas aux
conduits ventilés par l’extérieur.
La présente norme ne couvre pas les produits désignés "humides" (W) associés à la classe de corrosion 3.
La norme spécifie également un type de conduit de dimensions coordonnées à la hauteur d'assise des blocs
de maçonnerie, et désigné par conduit de type B (conduits appareillés).
La présente Norme européenne couvre également les conduits hauteur d'étage et les boisseaux armés pour
la manutention.
NOTE Toute référence au terme conduit de fumée implique l’ensemble des conduits et leurs accessoires, sauf
indication contraire.
Dimniki - Sestavni deli - Betonski bloki za dimnike
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dimniki - Sestavni deli - Betonski bloki za dimnikeAbgasanlagen - Bauteile - BetonformblöckeConduits de fumée - Composants - Conduits de fumée simple paroi en bétonChimneys - Components - Concrete flue blocks91.100.30Beton in betonski izdelkiConcrete and concrete products91.060.40Dimniki, jaški, kanaliChimneys, shafts, ductsICS:Ta slovenski standard je istoveten z:EN 1858:2008SIST EN 1858:2009en,fr,de01-marec-2009SIST EN 1858:2009SLOVENSKI
STANDARDSIST EN 1858:20031DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1858December 2008ICS 91.060.40; 91.100.30Supersedes EN 1858:2003
English VersionChimneys - Components - Concrete flue blocksConduits de fumée - Composants - Conduits de fuméesimple et multiparois en bétonAbgasanlagen - Bauteile - BetonformblöckeThis European Standard was approved by CEN on 1 November 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1858:2008: ESIST EN 1858:2009
Test methods.19 SIST EN 1858:2009
Examples of concrete flue block shapes.39 B.1 Straight flue blocks.39 B.2 Flue block fittings - Tee/access/connection unit.40 B.3 Examples of Type B flue block shapes.41 Annex C (normative)
Thermal resistance calculation method.43 C.1 Thermal resistance of the individual element.43 C.2 Thermal resistance of the chimney and of enclosures.43 Annex D (normative)
Requirements of sampling plan according to ISO 2859-1:1999 at an Acceptable Quality Level (AQL) of 10 % and inspection level S2.44 D.1 Acceptability determination.44 D.2 Normal inspection.44 D.3 Normal.46 D.4 Reduced to normal inspection.47 D.5 Tightened inspection.47 D.6 Tightened to normal inspection.47 D.7 Discontinuation of inspection.47 Annex E (informative)
Recommended test sequence.48 Annex ZA (informative)
Clauses of this European standard addressing the provisions of the EU Construction Products Directive.49 ZA.1 Relationship between EU Directives and this European Standard.49 ZA.2 Procedure of attestation of conformity of concrete flue blocks.51 ZA.3 CE Marking and labelling.52 Bibliography.55 ` SIST EN 1858:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.