prEN ISO 642

Steel - Hardenability test by end quenching (Jominy test) (ISO/DIS 642:2023)

Stahl - Stirnabschreckversuch (Jominy-Versuch) (ISO/DIS 642:2023)

Acier - Essai de trempabilité par trempe en bout (essai Jominy) (ISO/DIS 642:2023)

La présente Norme internationale spécifie la méthode de détermination de la trempabilité de l'acier par trempe en bout (essai Jominy), à l'aide d'une éprouvette de 25 mm de diamètre et 100 mm de longueur.NOTE Par accord et pour un domaine donné d'application, l'essai décrit dans la présente Norme internationale peut être remplacé par le calcul de la courbe Jominy conformément à un modèle mathématique accepté (voir annexe C). En cas de litige, l'essai doit être effectué.

Jeklo - Preskus kaljivosti jekla po Jominyju (ISO/DIS 642:2023)

General Information

• Status: Not Published
• Publication Date: 05-Jan-2025
• ICS: 77.040.99 - Other methods of testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 03-May-2024
• Completion Date: 03-May-2024
• Ref Project: oSIST prEN ISO 642:2023 - Steel - Hardenability test by end quenching (Jominy test) (ISO/DIS 642:2023)

Relations

• Revises: EN ISO 642:1999 - Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 642:2023
01-september-2023
Jeklo - Preskus kaljivosti jekla po Jominyju (ISO/DIS 642:2023)
Steel - Hardenability test by end quenching (Jominy test) (ISO/DIS 642:2023)
Stahl - Stirnabschreckversuch (Jominy-Versuch) (ISO/DIS 642:2023)
Acier - Essai de trempabilité par trempe en bout (essai Jominy) (ISO/DIS 642:2023)
Ta slovenski standard je istoveten z: prEN ISO 642
ICS:
77.040.99 Druge metode za Other methods of testing of
preskušanje kovin metals
77.080.20 Jekla Steels
oSIST prEN ISO 642:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 642:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 642:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 642
ISO/TC 17/SC 7 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-07-19 2023-10-11
Steel — Hardenability test by end quenching (Jominy test)
Acier — Essai de trempabilité par trempe en bout (essai Jominy)
ICS: 77.040.99
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 642:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 642:2023
ISO/DIS 642:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 642
ISO/TC 17/SC 7 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Steel — Hardenability test by end quenching (Jominy test)
Acier — Essai de trempabilité par trempe en bout (essai Jominy)
ICS: 77.040.99
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 642:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 642:2023
ISO/DIS 642:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and designations . 1
5 Principle .
...