EN ISO 4404-2:2010
(Main)Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
ISO 4404-2:2010 specifies a procedure for the determination of the corrosion-inhibiting properties of non-aqueous hydraulic fluids within the category HFD, as classified in ISO 6743‑4.
It provides a qualitative assessment of corrosion of five of the most common metals used in the construction of hydraulic systems, but other metals and/or alloys could be added or substituted for these metals for particular installations.
Mineralölerzeugnisse und verwandte Produkte - Bestimmung der korrosionsverhindernden Eigenschaften von schwer entflammbaren Druckflüssigkeiten - Teil 2: Nicht-wässrige Flüssigkeiten (ISO 4404-2:2010)
Dieser Teil der ISO 4404 legt ein Verfahren zur Bestimmung der korrosionshemmenden Eigenschaften von
nicht-wässrigen Hydraulikflüssigkeiten der Klasse HFD, die in ISO 6743-4 klassifiziert sind, fest.
Das Prüfverfahren ermöglicht die qualitative Beurteilung der Korrosion für die fünf am häufigsten in der
Konstruktion von Hydraulikanlagen eingesetzten Metalle. Für spezielle Anlagenkonstruktionen können jedoch
auch andere Metalle und/oder Legierungen ergänzt oder substituiert werden.
ANMERKUNG Die Bestimmung der Korrosionsschutzeigenschaften von wässrigen Hydraulikflüssigkeiten der Klassen
HFA, HFB und HFC werden in ISO 4404-1 beschrieben.
Pétrole et produits connexes - Détermination de la résistance à la corrosion de fluides hydrauliques difficilement inflammables - Partie 2: Fluides non aqueux (ISO 4404-2:2010)
L'ISO 4404-2:2010 spécifie une méthode de détermination du pouvoir anticorrosif des fluides hydrauliques non aqueux de catégorie HFD, selon la classification de l'ISO 6743-4.
Elle permet d'obtenir une évaluation qualitative de la corrosion provoquée par un fluide sur cinq des métaux les plus employés dans la fabrication des circuits hydrauliques. Cependant, d'autres métaux et/ou alliages peuvent être ajoutés ou substitués à ces métaux dans le cadre d'installations spéciales.
Nafta in naftni proizvodi - Določevanje korozijske odpornosti negorljivih hidravličnih tekočin - 2. del: Nevodne tekočine (ISO 4404-2:2010)
Ta del ISO 4404 določa postopek za določevanje korozijsko preprečevalnih lastnosti nevodnih hidravličnih tekočin v kategoriji HFD, kot je označeno v ISO 6743-4. Zagotavlja kvalitativno oceno korozije petih kovin, najpogosteje uporabljenih v postavitvi hidravličnih sistemov, vendar so lahko druge kovine in/ali zlitine dodane ali izvzete za posamezne postavitve.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RUOMLYLKMineralölerzeugnisse und verwandte Produkte - Bestimmung der korrosionsverhindernden Eigenschaften von schwer entflammbaren Druckflüssigkeiten - Teil 2: Nicht-wässrige Flüssigkeiten (ISO 4404-2:2010)Pétrole et produits connexes - Détermination de la résistance à la corrosion de fluides hydrauliques difficilement inflammables - Partie 2: Fluides non aqueux (ISO 4404-2:2010)Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)75.120Hydraulic fluidsICS:Ta slovenski standard je istoveten z:EN ISO 4404-2:2010SIST EN ISO 4404-2:2011en01-marec-2011SIST EN ISO 4404-2:2011SLOVENSKI
STANDARDSIST EN ISO 4404-2:20031DGRPHãþD
SIST EN ISO 4404-2:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 4404-2
December 2010 ICS 75.120 Supersedes EN ISO 4404-2:2003English Version
Petroleum and related products -Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
Pétrole et produits connexes - Détermination de la résistance à la corrosion de fluides hydrauliques difficilement inflammables - Partie 2: Fluides non aqueux (ISO 4404-2:2010)
Mineralölerzeugnisse und verwandte Produkte - Bestimmung der korrosionsverhindernden Eigenschaften von schwer entflammbaren Druckflüssigkeiten - Teil 2: Nicht-wässrige Flüssigkeiten (ISO 4404-2:2010) This European Standard was approved by CEN on 13 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 4404-2:2010: ESIST EN ISO 4404-2:2011
EN ISO 4404-2:2010 (E) 2 Contents Page Foreword .3 SIST EN ISO 4404-2:2011
EN ISO 4404-2:2010 (E) 3 Foreword This document (EN ISO 4404-2:2010) has been prepared by Technical Committee ISO/TC 28 “Petroleum products and lubricants” in collaboration with Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 4404-2:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 4404-2:2010 has been approved by CEN as a EN ISO 4404-2:2010 without any modification.
SIST EN ISO 4404-2:2011
SIST EN ISO 4404-2:2011
Reference numberISO 4404-2:2010(E)© ISO 2010
INTERNATIONAL STANDARD ISO4404-2Second edition2010-12-15Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 2: Non-aqueous fluids Pétrole et produits connexes — Détermination de la résistance à la corrosion de
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.