EN 1034-1:2000+A1:2010

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

1.1   This standard applies to paper making and paper finishing machines. It contains definitions and requirements which apply to all paper making and paper finishing machines listed in annex A and shall be used in connection with the specific part applicable for the respective machine listed in annex A. Specific parts can contain additional requirements or deviations from EN 1034-1 in which case the specific stipulations take precedence over the specification made in EN 1034-1. The standard deals with the hazards listed in 4.
1.2   This standard does not apply to machines used in paper converting. See EN 1010-1 to EN 1010-5.
1.3   This standard applies to machines produced after............. (date of CEN approval).

Sicherheit von Maschinen - Sicherheitstechnische Anforderungen an Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 1: Gemeinsame Anforderungen

Anforderungen, die für alle im Anhang A genannten Maschinen von Bedeutung sind, und ist in
Verbindung mit dem für die spezielle Maschine zutreffenden Teil dieser Norm zu verwenden. Die Spezialteile
können weitere oder von EN 1034-1 abweichende Spezifikationen enthalten. Die Spezifikationen der
Spezialteile haben Vorrang vor den Spezifikationen von EN 1034-1. Es werden die im Abschnitt 4 aufgelisteten
Gefährdungen behandelt.
1.2 Diese Norm gilt nicht für Papierverarbeitungsmaschinen. Siehe EN 1010-1 bis EN 1010-5.
1.3 Diese Norm gilt für Maschinen, die nach dem (Datum der CEN-Zustimmung) hergestellt werden.

Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 1: Prescriptions communes

1.1 La présente norme s'applique à toutes les machines de fabrication et de finition du papier. La présente norme
comprend les définitions et les prescriptions qui s'appliquent à toutes les machines de fabrication mentionnées
en annexe A.
Elle doit être utilisée conjointement avec la partie relative à la machine spécifique. Les autres parties spécifiques de
l’!EN 1034-1" peuvent contenir des prescriptions ou dérogations supplémentaires. Les prescriptions des autres
parties spécifiques de la norme ont la priorité sur celles de l’!EN 1034-1". Cette norme traite de tous les
phénomènes dangereux énumérés dans l'article 4.
1.2 La présente norme ne s'applique pas aux machines de transformation du papier. Voir EN 1010-1 à EN 1010-5.
1.3 La présente norme s'applique aux machines qui sont fabriquées après octobre 2000.

Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 1. del: Splošne zahteve

Ta standard se uporablja za stroje in opremo za izdelavo papirja. Vsebuje definicije in zahteve, ki veljajo za vse stroje in opremo za izdelavo papirja, naštete v Dodatku A, ter se uporabljajo v povezavi s posebnim delom, ki velja za ustrezen stroj, naštet v Dodatku A. Posebni deli lahko vsebujejo dodatne zahteve ali odstopanja od EN 1034-1; v takem primeru imajo posebne določbe prednost pred zahtevami, navedenimi v  EN 1034-1. Standard obravnava nevarnosti, naštete v točki 4. Ta standard se ne uporablja za stroje, ki se uporabljajo za obdelavo papirja. Glej EN 1010-1 do EN 1010-5.

General Information

• Status: Withdrawn
• Publication Date: 02-Mar-2010
• Withdrawal Date: 11-May-2021
• ICS: 85.100 - Equipment for the paper industry
• Technical Committee: CEN/TC 198 - Printing and paper machinery - Safety
• Drafting Committee: CEN/TC 198/WG 2 - Paper Machinery
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-May-2021
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 1034-1:2000+A1:2010 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

Relations

• Merged From: EN 1034-1:2000 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
• Effective Date: 19-Jan-2023
• Merged From: EN 1034-1:2000/FprA1 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
• Effective Date: 18-Jan-2023
• Replaced By: EN 1034-1:2021 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
• Effective Date: 19-May-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Sicherheitstechnische Anforderungen für Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 1: Gemeinsame AnforderungenSécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 1: Prescriptions communesSafety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements85.100Oprema za papirno industrijoEquipment for the paper industry21.020Characteristics and design of machines, apparatus, equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 1034-1:2000+A1:2010SIST EN 1034-1:2000+A1:2010en,fr01-maj-2010SIST EN 1034-1:2000+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1034-1:2000+A1
March 2010 ICS 85.100 Supersedes EN 1034-1:2000English Version
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 1: Prescriptions communes
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen für Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 1: Gemeinsame Anforderungen This European Standard was approved by CEN on 17 September 1999 and includes Amendment 1 approved by CEN on 17 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1034-1:2000+A1:2010: ESIST EN 1034-1:2000+A1:2010

Trilingual alphabetical list of paper making and paper finishing machines . 32Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC" . 33Annex ZB (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" . 34!Bibliography" . 35 SIST EN 1034-1:2000+A1:2010

annex A. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
(ISO 7731:1986 modified) EN 547-1, Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery EN 547-2, Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings EN 547-3, Safety of machinery — Human body measurements — Part 3: Anthropometric data !deleted text" EN 614-1, Safety of machinery — Ergonomics design principles — Part 1: Terminology and general principles EN 614-2, Safety of machinery — Ergonomics design principles — Part 2: Interaction between the design of machinery and tasks SIST EN 1034-1:2000+A1:2010
...