EN 201:1997
(Main)Rubber and plastics machines - Injection moulding machines - Safety requirements
Rubber and plastics machines - Injection moulding machines - Safety requirements
This standard specifies the essential safety requirements for injection moulding machines for the processing of plastics and/or rubber. All hazards listed in clause 4 are covered by this standard. The following machines are excluded: - machines on which the clamping unit can only be operated by the physical force of the operator; - machines for reaction injection moulding (RIM, see prEN 1612-1 and prEN 1612-2); - compression and transfer moulding machines (see EN 289); - direct on sole injection moulding machines and full boot injection moulding machines (Wellington type boots with textile inserts) (see prEN 1845). The safety requirements for the interaction between injection moulding machines and ancillary equipment are specified. The safety requirements for the ancillary equipment itself are not specified. This standard does not cover requirements for the design of an exhaust system. This standard applies to injection moulding machines manufactured after the date of issue of the standard.
Gummi- und Kunststoffmaschinen - Spritzgießmaschinen - Sicherheitsanforderungen
Diese Norm beschreibt die wesentlichen Sicherheitsanforderungen an Spritzgießmaschinen für die Verarbeitung von Kunststoff und/oder Kautschuk. Alle Gefährdungen nach Abschnitt 4 werden in dieser Norm behandelt.
Machines pour le caoutchouc et les matières plastiques - Machines à injecter - Prescriptions de sécurité
La présente norme spécifie les exigences de sécurité essantielles relatives aux machines à injecter le caoutchouc ou les matières plastiques. Tous les risques énumérés à l'article 4 sont traités dans la présente norme.
Rubber and plastics machines - Injection moulding machines - Safety requirements
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 201:2000
01-april-2000
Rubber and plastics machines - Injection moulding machines - Safety
requirements
Rubber and plastics machines - Injection moulding machines - Safety requirements
Gummi- und Kunststoffmaschinen - Spritzgießmaschinen - Sicherheitsanforderungen
Machines pour le caoutchouc et les matieres plastiques - Machines a injecter -
Prescri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.