iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13481-3:2012

(Main)

Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers

Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers

This European Standard is applicable to fastening systems, in categories A - C and E as specified in EN 13481 1:2012, 3.1, for use on wood sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1.
Table 1 - Fastening category criteria
Category   Maximum design axle load
kN   Minimum curve radius
m
A   130   40
B   180   80
C   260   150
E   350   150
NOTE   The maximum axle load for categories A and B does not apply to maintenance vehicles.
The requirements apply to:
-   fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems;
-   fastening systems for the rail sections in EN 13674-1 (excluding 49E4) and EN 13674-4+A1.
This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints.
This standard is for type approval of a complete fastening assembly only.

Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 3: Befestigungssysteme für Holzschwellen

Diese Europäische Norm gilt für Schienenbefestigungssysteme der Kategorien A – C und E wie in FprEN 13481-1:2010,3.1 festgelegt für die Verwendung von Holzschwellen im Schotteroberbau mit den maximalen Auslegungsachslasten und Mindest-Gleisbogenhalbmessern nach Tabelle 1.
Die Anforderungen gelten für:
-   Befestigungssysteme, die am Fuß und/oder am Schienensteg wirken, einschließlich direkter und indirekter Befes¬tigungssysteme;
-   Befestigungssysteme für Schienenprofile nach EN 13674-1 (ausgenommen 49 E4) und EN 13674-4.
Diese Norm gilt nicht für Befestigungssysteme für andere Schienenprofile, starre Befestigungssysteme oder spezielle Befestigungssysteme mit verschraubten oder geklebten Schienenstößen.
Diese Norm gilt ausschließlich für die Typzulassung eines kompletten Schienenbefestigungssystems.

Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 3: Systèmes de fixation pour traverses en bois

La présente Norme européenne est applicable aux systèmes de fixation des catégories A à C et E comme spécifiée dans l’EN 13481 1:2012, 3.1, pour utilisation sur des traverses en bois en voie ballastée avec des charges à l’essieu maximales et des rayons de courbure minimaux selon le Tableau 1.
Les exigences s’appliquent :
-   aux systèmes de fixation qui agissent sur le patin et/ou l’âme du rail, y compris les systèmes de fixation directs et les systèmes avec selle ;
-   aux systèmes de fixation pour les profils de rail décrits dans l’EN 13674-1 (à l’exclusion du profil 49E4) et l’EN 13674-4.
La présente norme ne s'applique pas aux systèmes de fixation pour d’autres profils de rail, aux systèmes de fixation rigides, ou aux systèmes de fixation spéciaux au droit des éclisses.
La présente norme s'applique uniquement à la qualification d’un système de fixation complet.

Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 3. del: Pritrdilni sistemi za lesene prage

Ta evropski standard se uporablja za pritrdilne sisteme iz kategorij A do C in E iz točke 3.1 standarda EN 13481-1:2012 za lesene prage pri zgornjem ustroju s tamponskim slojem, ki imajo največjo osno obremenitev in najmanjši krivinski polmer v skladu s preglednico 1. Zahteve se uporabljajo za: – pritrdilne sisteme, ki delujejo na vznožje in/ali stojino tirnice, vključno z neposrednimi in posrednimi pritrdilnimi sistemi; – pritrdilne sisteme za dele železnice iz standardov EN 13674-1 (razen 49E4) in EN 13674-4. Ta standard se ne uporablja za pritrdilne sisteme za druge dele železnice, toge pritrdilne sisteme ali posebne pritrdilne sisteme, ki se uporabljajo pri zakovičenih spojih ali zlepljenih spojih. Ta standard se uporablja samo za odobritev tipa celotnega pritrdilnega sestava.

General Information

Status
Withdrawn
Publication Date
29-May-2012
Withdrawal Date
12-Jul-2022
ICS
93.100 - Construction of railways
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/SC 1/WG 17 - Fastening systems
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
13-Jul-2022
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 13481-3:2012 - Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers

Relations

Replaces
EN 13481-3:2002/A1:2006 - Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers
Effective Date
06-Jun-2012
Replaces
EN 13481-3:2002 - Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers
Effective Date
06-Jun-2009
Replaced By
EN 13481-3:2022 - Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood and polymeric composite sleepers
Effective Date
20-Jul-2022

Buy Standard

EN 13481-3:2012EN 13481-3:2012
PreviousNext
Standard
EN 13481-3:2012
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Zahteve za izdelavo pritrdilnih sistemov - 3. del: Pritrdilni sistemi za lesene prageBahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 3: Befestigungssysteme für HolzschwellenApplications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 3: Systèmes de fixation pour traverses en boisRailway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13481-3:2012SIST EN 13481-3:2012en,fr01-september-2012SIST EN 13481-3:2012SLOVENSKI
STANDARDSIST EN 13481-3:2004/A1:2007SIST EN 13481-3:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13481-3
May 2012 ICS 93.100 Supersedes EN 13481-3:2002English Version
Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers Applications ferroviaires - Voie - Exigences de performance pour les systèmes de fixation - Partie 3: Systèmes de fixation pour traverses en bois
Bahnanwendungen - Oberbau - Leistungsanforderungen für Schienenbefestigungssysteme - Teil 3: Befestigungssysteme für Holzschwellen This European Standard was approved by CEN on 27 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13481-3:2012: ESIST EN 13481-3:2012

Vibration and noise . 12A.1General . 12A.2Symbols . 12A.3Parameters for environmental vibration calculations . 12A.4Calculating the vibration attenuation . 13A.5Environmental noise . 13Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC . 14Bibliography . 16 SIST EN 13481-3:2012

Measurement of torsional resistance is included for use in assessing the risk of track buckling.
Classes for attenuation of dynamic loading are included for use when it it is necessary to protect sleepers from vehicle induced impacts.
The laboratory test for the effect of repeated loading is specified to assess the potential long term performance of the fastening in track.
The test for clamping force is only suitable for laboratory use. SIST EN 13481-3:2012

The requirements apply to:  fastening systems which act on the foot and/or web of the rail including direct fastening systems and indirect fastening systems;  fastening systems for the rail sections in EN 13674-1 (excluding 49E4) and EN 13674-4. This standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints or glued joints. This standard is for type approval of a complete fastening assembly only. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13145, Railway applications – Track – Wood sleepers and bearers EN 13146-1:2012, Railway applications – Track – Test methods for fastening systems – Part 1: Determination of longitudinal rail restraint EN 13146-2:2012, Railway applications – Track – Test methods for fastening systems – Part 2: Determination of torsional resistance EN 13146-4:2012, Railway applications – Track – Test methods for fastening systems – Part 4: Effect of repeated loading EN 13146-6:2012, Railway applications – Track – Test methods for fastening systems – Part 6: Effect of severe environmental conditions SIST EN 13481-3:2012
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17936:2024(Main)
Railway applications - Acoustics - Measurement of source terms for environmental noise calculations
SIST EN 17936:2024

This document addresses the measurement of source terms for environmental noise calculation for rail traffic (including light rail, such as trams, metros, etc.). It is applicable to the measurement of in-service trains on operational tracks.
It is not applicable to type acceptance testing of rolling-stock or tracks, or to derive source terms for time domain models.
The following rail traffic noise source types are in the scope:
-   rolling noise;
-   traction and equipment noise;
-   aerodynamic noise;
-   impact noise (e.g. rail joints, switch and crossings, wheel flats);
-   braking noise;
-   bridge noise;
-   squeal noise.
Noise from rail vehicles at standstill, such as stationary engine idling and auxiliary equipment at yards and stations, is covered by EN ISO 3095:2013 for measurement procedures and operating conditions, and by EN ISO 3740:2019 and EN ISO 3744 for the determination of sound power. It is therefore not in the scope of this document.
The calculation of the propagation of sound is part of generally standardized propagation models which are not addressed in this document.
Noise from fixed installations (e.g. stations, depots, electricity sub-stations) is not in the scope of this document.
Source terms are specific to a vehicle and track type. The scope includes measurement procedures and conditions and sampling requirements.

  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14587-2:2024(Main)
Railway applications - Infrastructure - Flash butt welding of new rails - Part 2: R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails by mobile welding machines at sites other than a fixed plant
SIST EN 14587-2:2024

This document specifies requirements for the approval of a welding process by mobile plant, together with the requirements for subsequent welding production.
It applies to new Vignole railway rails R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails of 46 kg/m and above, as contained in EN 13674-1:2011+A1:2017, welded by a flash butt welding process by mobile plant and intended for use on railway infrastructure.
This document applies to the welding of rails into welded strings.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16843:2024(Main)
Railway applications - Infrastructure - Mechanical requirements for joints in running rails
SIST EN 16843:2024

This European Standard deals with mechanical rail joints for flat bottom rails 46 kg/m and over. The scope of this standard is: to
establish requirements for insulated and non-insulated rail joints, for stressed rail (continuous welded rail, CWR) and unstressed rail (jointed track); to define mechanical and electrical requirements for type approval and for acceptance of insulated rail joints which are manufactured in a factory (prefab construction) as well as assembled onsite (site construction). This standard specifies the minimum requirements. Special applications as for instance tram systems may require different demands in certain paragraphs and should be agreed between customer and supplier. The scope also excludes expansion joints (it is covered in EN 13232-8), and special joints in switch constructions.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-6:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - Airborne sound insulation under direct sound field conditions
SIST EN 16272-6:2024

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for rail noise barriers and related devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise barriers and related devices to be installed along railways, to be measured either on typical installations alongside railways or in laboratory conditions;
-   determination of the intrinsic characteristics of airborne sound insulation of noise barriers and related devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long-term performance of noise barriers and related devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise barriers and related devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results need to be given in a restricted frequency range and the reasons for the restriction(s) need to be clearly reported.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-2:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne sound insulation under diffuse sound field conditions
SIST EN 16272-2:2024

This document specifies the laboratory method for measuring the airborne sound insulation performance of railway noise barriers in reverberant conditions. It covers the assessment of the intrinsic performance of noise barriers and related devices acting on airborne sound propagation that can reasonably be assembled inside the testing facility described in EN ISO 10140 2 and EN ISO 10140 4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise barriers to be installed on railway in non-reverberant conditions.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices, are out of the scope of this document.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-1:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption under diffuse sound field conditions
SIST EN 16272-1:2024

This European Standard specifies the laboratory method for measuring the sound absorption performance of railway noise barriers and related devices acting on airborne sound propagation in reverberant conditions. It covers the assessment of the intrinsic sound absorption performance of devices that can reasonably be assembled inside the testing facility described in EN ISO 354.
This method is not intended for the determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation to be installed on railways in non-reverberant conditions.
The test method in EN ISO 354 referred to in this European Standard excludes devices that act as weakly damped resonators. Some devices will depart significantly from these requirements and in these cases, care is needed in interpreting the results.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-5:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - Sound absorption under direct sound field conditions
SIST EN 16272-5:2024

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of sound absorption from railway noise barriers and related devices acting on airborne sound propagation, the sound reflection index RI, and then calculate a single-number rating for sound absorption from it.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation to be installed along railways, to be measured either on typical installations alongside railways or on a relevant sample section;
-   determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation in actual use under direct sound field conditions;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long-term performance of noise barriers and related devices acting on airborne sound propagation (with a repeated application of the method).
The test method is not intended for the following applications:
-   determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation to be installed in reverberant conditions, e.g. inside tunnels or deep trenches.
Results for the sound reflection index are expressed as a function of frequency, in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results are given in a restricted frequency range and the reasons of the restriction(s) are clearly reported.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13231-1:2023(Main)
Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings
SIST EN 13231-1:2024

This document specifies technical requirements and tolerances for the acceptance of works on ballasted track situated on:
-   plain line;
-   switches and crossings; and
-   rail expansion devices as part of the track
for 1 435 mm and wider track gauge railways.
The works on ballasted track, hereafter referred to as track works, concern construction of new track, track renewal and track maintenance.
This document specifies the requirements for substructure works, track geometry, absolute track position, working parameters of on track machines, track components, ballast cross section, structure gauge, stressing works, specific measurements and quality checks for switches and crossings and rail expansion devices, and for the measuring systems used to perform measurements, verifications and checks for the scope of acceptance. Requirements for responsibilities and documentation necessary for the acceptance of track works are specified.
This document also requires compliance of all track materials with the customer’s relevant acceptance criteria and specifications provided by the supplier.
This document does not cover works related to reprofiling the railhead or the associated measurements, except for some measurements related to safety, as these works are covered by other parts of EN 13231 series.
Platform reconstruction works and level crossing works are not covered by this document.
This document does not apply to urban rail systems or ballastless track.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-3-1:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse sound field applications
SIST EN 16272-3-1:2023

This document specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices are outside of the scope of this document.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16272-3-2:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications
SIST EN 16272-3-2:2023

This document specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices are outside of the scope of this document.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day