EN 12574-3:2006
(Main)Stationary waste containers - Part 3: Safety and health requirements
Stationary waste containers - Part 3: Safety and health requirements
This part of EN 12574 specifies essential safety and health requirements for stationary waste containers (in the text also called containers), not including special containers for hazardous waste.
Stationäre Abfallsammelbehälter - Teil 3: Sicherheits- und Gesundheitsschutzanforderungen
Dieses Dokument legt grundlegende Sicherheits- und Gesundheitsschutzanforderungen für stationäre Abfallsammelbehälter (im Folgenden auch kurz Behälter genannt) fest. Er behandelt keine Spezialbehälter für gefährlichen Abfall.
Conteneurs fixes à déchets - Partie 3: Exigences d'hygiéne et de sécurité
Cette partie de l’EN 12574 spécifie les exigences essentielles de sécurité et d'hygiène pour les conteneurs fixes à déchets (également appelés « conteneurs » dans le texte), mais ne concerne pas les conteneurs spéciaux pour déchets dangereux.
Nepremični zabojniki za odpadke – 3. del: Varnostne in zdravstvene zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2006
1DGRPHãþD
SIST EN 12574-3:2004
1HSUHPLþQL]DERMQLNL]DRGSDGNH±GHO 9DUQRVWQHLQ]GUDYVWYHQH]DKWHYH
Stationary waste containers - Part 3: Safety and health requirements
Stationäre Abfallsammelbehälter - Teil 3: Sicherheits- und
Gesundheitsschutzanforderungen
Conteneurs fixes a déchets - Partie 3: Exigences d'hygiéne et de sécurité
Ta slovenski standard je istoveten z: EN 12574-3:2006
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12574-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 13.030.40 Supersedes EN 12574-3:2002
English Version
Stationary waste containers - Part 3: Safety and health
requirements
Conteneurs fixes à déchets - Partie 3: Exigences d'hygiéne Stationäre Abfallsammelbehälter - Teil 3: Sicherheits- und
et de sécurité Gesundheitsschutzanforderungen
This European Standard was approved by CEN on 28 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12574-3:2006: E
worldwide for CEN national Members.
Contents
page
Foreword .3
1 Scope .4
2 Normative references .4
3 General requirements of construction .4
4 Handles.4
5 Wheels .5
6 Immobilization.5
7 Edges .6
8 Lids for manual handling.6
9 Cleaning.6
10 Marking .6
11 Information for use .6
Annex A (informative) A-Deviations.7
Figures
Figure 1 — Handles (round, oval, rectangular). 5
Figure 2 — Clearance . 5
Foreword
This European Standard (EN 12574-3:2006) has been prepared by Technical Committee CEN/TC 183 “Waste
management”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at
the latest by August 2006.
This European Standard supersedes EN 12574-3:2002.
This European Standard is one part of the series of standards of EN 12574 about "Stationary waste
containers" comprising the following Parts:
Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or
pocket lifting device – Dimensions and design;
Part 2: Performance requirements and test methods;
Part 3: Safety and health requirements.
To help in the understanding of the requirements they are not split into separate safety, ergonomic and health
sections but are divided into chapters dealing with constructional units.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
1 Scope
This part of EN 12574 specifies essential safety and health requirements for stationary waste containers (in
the text also called containers), not including special containers
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.