EN 12843:2004

Precast concrete products - Masts and poles

This Standard specifies requirements for precast concrete poles (also commonly called masts) (either all of a piece or composed of elements), reinforced and/or prestressed as structural elements; they may be hollow or solid and may receive or include additional components (e.g. cross-arms, platforms etc.), inserts and connectors. Additional elements may be connected to pole elements.
Structures made from such elements in mono- or multi-legged form may be used for :
- overhead electrical lines ;
- telecommunication lines ;
- overhead electrical lines for railways, trams and similar ;
- supports for lighting ;
- supports for loudspeaker installation ;
- antenna and telecommunication poles ;
- supports for wind turbines ;
- and similar installations.
This Standard does not cover lighting columns for use in traffic circulation areas.

Betonfertigteile - Maste

Dieses Dokument legt Anforderungen an vorgefertigte Betonmaste aus Stahl  und/oder Spannbeton, die entweder in einem Stück oder aus mehreren Teilen hergestellt und für tragende Zwecke eingesetzt werden, fest. Die Maste dürfen hohl oder massiv sein oder zusätzliche Elemente (z. B. Querriegel, Arbeitsbühnen usw.), Einbauteile und Anschlüsse aufnehmen oder enthalten. Zusätzliche Elemente dürfen an den Mastbauteilen befestigt sein.
Tragwerke, die aus derartigen Bauteilen in ein  oder mehrstieliger Form hergestellt wurden, werden eingesetzt für:
Freileitungen;
Fernmeldeleitungen;
elektrische Oberleitungen für Schienenfahrzeuge;
Ausleger für das Anbringen von Beleuchtung
Ausleger für das Anbringen von Lautsprechern;
Antennen  und Fernmeldemaste;
Tragmaste für Windturbinen;
und ähnliche Anlagen.
Dieses Dokument gilt nicht für Lichtmaste an Straßen und befahrenen Flächen.

Produits préfabriqués en béton - Mâts et poteaux

Le présent document spécifie les prescriptions en matière de poteaux préfabriqués (aussi communément appelés mâts) (d'une pièce ou composés de plusieurs éléments), en béton armé et/ou précontraint, utilisés comme éléments de structure ; ils peuvent être creux ou pleins et peuvent recevoir ou comporter des composants supplémentaires (par exemple des traverses, des plates-formes etc.), des inserts et des connecteurs. Des éléments supplémentaires peuvent être assemblés aux éléments du poteau.
Les structures constituées de tels éléments, à un ou plusieurs pieds, peuvent être utilisées pour :
-   les lignes électriques aériennes ;
-   les lignes de télécommunication ;
-   les lignes électriques aériennes pour chemins de fer, tramways et les installations comparables ;
-   les supports d'éclairage ;
-   les supports d'installation de haut-parleurs ;
-   les antennes et poteaux de télécommunication ;
-   les supports pour éoliennes ;
-   et les installations similaires.
Le présent document ne couvre pas les candélabres utilisés dans les zones de circulation de véhicules.

Montažni betonski izdelki - Stebri in drogovi

General Information

• Status: Published
• Publication Date: 01-Sep-2004
• ICS: 29.240.20 - Power transmission and distribution lines
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 229 - Precast concrete products
• Drafting Committee: CEN/TC 229/WG 1 - Products for which the stability requirements is predominant
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 09-Jun-2009
• Completion Date: 09-Jun-2009
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
• Ref Project: SIST EN 12843:2004 - Precast concrete products - Masts and poles

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Montažni betonski izdelki - Stebri in drogoviBetonfertigteile - MasteProduits préfabriqués en béton - Mâts et poteauxPrecast concrete products - Masts and poles91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 12843:2004SIST EN 12843:2004en,fr,de01-oktober-2004SIST EN 12843:2004SLOVENSKI
STANDARD



SIST EN 12843:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12843September 2004ICS 91.100.30; 29.240.20English versionPrecast concrete products - Masts and polesProduits préfabriqués en béton - Mâts et poteauxBetonfertigteile - MasteThis European Standard was approved by CEN on 24 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12843:2004: ESIST EN 12843:2004



EN 12843:2004 (E) 2 Contents
The numbering of clauses is strictly related to EN 13369, Common rules for precast concrete products, at least for the first three digits. When a clause of EN 13369 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering
page Foreword.4 Introduction.6 1 Scope.7 2 Normative references.7 3 Terms and definitions.7 4 Requirements.8 4.1 Material requirements.8 4.1.1 General.8 4.1.5 Inserts and connectors.8 4.2 Production requirements.9 4.3 Finished product requirements.9 4.3.1 Geometrical properties.9 4.3.2 Surface characteristics.9 4.3.3 Mechanical resistance.9 4.3.4 Resistance and reaction to fire.10 4.3.7 Durability.10 4.3.8 Detailing.10 4
...