EN ISO 13997:1999
(Main)Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999)
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999)
This International Standard specifies a cut test method, and related calculations, for use on materials and assemblies designed for protective clothing. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings. This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns. The test described in this International Standard is not considered suitable for testing materials made from chain mail and metalplates. The text of this International Standard does not include provisions for the safeguard of the operator.
Schutzkleidung - Mechanische Eigenschaften - Bestimmung des Widerstandes gegen Schnitte mit scharfen Gegenstäden (ISO 13997:1999)
Diese Internationale Norm legt ein Schneidprüfverfahren und die damit zusammenhängenden Berechnungen fest. Die Prüfung dient der Anwendung an Materialien und Materialkombinationen, die zur Verwendung für Schutzkleidung vorgesehen sind. Die Prüfung bestimmnt die Schnittfestigkeit gegen Schnitte durch sharfe Ränder wie von Messern, Metallblechteilen, Spänen, Glas, mit Klingen versehenen Werkzeugen und Gußstücken. Die Prüfung liefert keine Daten über den Materialwiderstand gegen das Durchdringen spitzer Gegenstände wie Nadeln und Dornen.
Vêtements de protection - Propriétés mécaniques - Détermination de la résistance à la coupure par des objets tranchants (ISO 13997:1999)
La présente Norme internationale contient les spécifications d'une méthode d'essai de coupure et des calculs associés. L'essai est à utiliser sur des matériaux et assemblages destinés à des vêtements de protection. L'essai traite des menaces provoquées par les objets à arêtes vives, tels que les couteaux, les parties métalliques des tôles, les ébarbures, le verre, les outils à lame et les articles en fonte.L'essai prescrit ne donne pas d'informations sur la résistance à la pénétration par des objets pointus, du type aiguilles et pointes. L'essai décrit dans la présente Norme internationale n'est pas considéré convenir aux essais de matériaux réalisés en cotte de mailles ou en plaquettes de métal. La norme ne prévoit pas de dispositions traitant de la sécurité de l'opérateur.
Varovalna obleka – Mehanske lastnosti – Ugotavljanje odpornosti proti urezu z ostrimi predmeti (ISO 13997:1999)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13997:2000
01-februar-2000
Varovalna obleka – Mehanske lastnosti – Ugotavljanje odpornosti proti urezu z
ostrimi predmeti (ISO 13997:1999)
Protective clothing - Mechanical properties - Determination of resistance to cutting by
sharp objects (ISO 13997:1999)
Schutzkleidung - Mechanische Eigenschaften - Bestimmung des Widerstandes gegen
Schnitte mit scharfen Gegenstäden (ISO 13997:1999)
Vetements de protection - Propriétés mécaniques - Détermination de la résistance a la
coupure par des objets tranchants (ISO 13997:1999)
Ta slovenski standard je istoveten z: EN ISO 13997:1999
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN ISO 13997:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
INTERNATIONAL ISO
STANDARD 13997
First edition
1999-08-15
Protective clothing — Mechanical
properties — Determination of resistance to
cutting by sharp objects
Vêtements de protection — Propriétés mécaniques — Détermination de la
résistance à la coupure par des objets tranchants
A
Reference number
ISO 13997:1999(E)
---------------------- Page: 2 ----------------------
ISO 13997:1999(E)
Contents
1 Scope .1
2 Normative reference .1
3 Terms and definitions .1
4 Requirements.1
5 Sampling.2
6 Test method.2
6.1 Principle.2
6.2 Test apparatus .2
6.3 Test procedure.3
7 Test report .5
Annex A (informative) Specification of a cut test.6
Annex B (informative) Instrumentation meeting the requirements of this International Standard.8
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii
---------------------- Page: 3 ----------------------
© ISO
ISO 13997:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 13997 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective
clothing and equipment, Subcommittee SC 13, Protective clothing.
Annexes A and B of this International Standard are for information only.
iii
----------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.