EN 12697-29:2020

Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen

This document specifies a test method for determining the dimensions of cylindrical, rectangular or non-rectangular bituminous test specimens by measurement.
The test is applicable to laboratory-made specimens, trimmed by sawing, or specimens from cores cut from the road, trimmed by sawing.

Asphalt - Prüfverfahren - Teil 29: Bestimmung der Maße von Asphalt-Probekörpern

Dieses Dokument legt ein Prüfverfahren fest, mit dem die Maße von zylindrischen, rechteckigen oder nichtrechteckigen Asphalt-Probekörpern durch Abmessen ermittelt werden.
Dieses Verfahren ist zur Anwendung auf im Labor hergestellte Probekörper bestimmt, die entweder durch Sägen zugeschnitten oder als Bohrkern aus einer eingebauten Fläche entnommen und dann durch Sägen zugeschnitten wurden.

Mélanges bitumineux - Méthodes d'essai - Partie 29 : Détermination des dimensions des éprouvettes bitumineuses

Ce document spécifie une méthode d’essai pour déterminer par mesurage les dimensions d’éprouvettes bitumineuses cylindriques, rectangulaires ou non-rectangulaires.
Cet essai est applicable à des éprouvettes préparées en laboratoire puis ajustées par sciage, ou extraites de la chaussée par carottage puis ajustées par sciage.

Bitumenske zmesi - Preskusne metode - 29. del: Ugotavljanje mer bitumenskega preskušanca

General Information

• Status: Published
• Publication Date: 09-Jun-2020
• Withdrawal Date: 30-Dec-2020
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Jun-2020
• Due Date: 08-Feb-2021
• Completion Date: 10-Jun-2020
• Ref Project: SIST EN 12697-29:2020 - Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen

Relations

• Replaces: EN 12697-29:2002 - Bituminous mixtures - Test method for hot mix asphalt - Part 29: Determination of the dimensions of a bituminous specimen
• Effective Date: 29-Aug-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12697-29:2020
01-september-2020
Nadomešča:
SIST EN 12697-29:2004
Bitumenske zmesi - Preskusne metode - 29. del: Ugotavljanje mer bitumenskega
preskušanca
Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a
bituminous specimen
Asphalt - Prüfverfahren - Teil 29: Bestimmung der Maße von Asphalt-Probekörpern
Matériaux enrobés - Méthode d'essai - Partie 29 : Détermination des dimensions du
spécimen bitumineux
Ta slovenski standard je istoveten z: EN 12697-29:2020
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-29:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12697-29:2020

---------------------- Page: 2 ----------------------
SIST EN 12697-29:2020


EN 12697-29
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2020
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 12697-29:2002
English Version

Bituminous mixtures - Test methods - Part 29:
Determination of the dimensions of a bituminous
specimen
Mélanges bitumineux - Méthodes d'essai - Partie 29 : Asphalt - Prüfverfahren - Teil 29: Bestimmung der
Détermination des dimensions des éprouvettes Maße von Asphalt-Probekörpern
bitumineuses
This European Standard was approved by CEN on 18 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-29:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12697-29:2020
EN 12697-29:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Apparatus . 4
5 Procedure. 4
5.1 General . 4
5.2 Measurement of height . 4
5.3 Measurement of diameter . 5
5.4 Measurement of (non)-rectangular specimens . 5
6 Test report . 5
7 Precision .
...