EN ISO 19496-2:2017

Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and descriptions (ISO 19496-2:2017)

ISO 19496-2:2017 establishes a system for the cataloguing of defects in sheet steel enamelling. It serves for a consistent language use concerning the designation and characterization of enamelling defects. This document is limited to detectable defects and does not purport to fully take into consideration all occurring types of defects. It does not evaluate enamelling defects; the classification carried out serves for the conveyance of practical knowledge.

Email und Emaillierungen - Terminologie - Teil 2: Darstellung und Charakterisierung (ISO 19496-2:2017)

Dieses Dokument stellt ein System für die Katalogisierung von Defekten bei der Stahlblech-Emaillierung auf. Es dient dem einheitlichen Sprachgebrauch bei der Bezeichnung und Charakterisierung von Emaildefekten. Dieses Dokument ist nur auf erkennbare Defekte beschränkt und erhebt nicht den Anspruch auf vollständige Berücksichtigung aller vorkommenden Defektarten. Sie nimmt keine Bewertung von Emaildefekten vor, die vorgenommene Einstufung dient der Erfahrungsübermittlung.

Émaux vitrifiés - Terminologie - Partie 2: Représentations visuelles et descriptions (ISO 19496-2:2017)

ISO 19496-2:2017 établit un système de catalogage des défauts d'émaillage sur tôles d'acier. Il vise à maintenir la cohérence de la terminologie utilisée pour la désignation et la caractérisation des défauts d'émaillage. Le présent document se limite aux défauts détectables et n'a pas pour but de prendre en considération tous les types de défauts pouvant survenir. Il n'évalue pas les défauts d'émaillage; la classification réalisée est un moyen de communication des connaissances pratiques.

Steklasti in keramični emajli - Terminologija - 2. del: Vidni prikaz in opis (ISO 19496-2:2017)

Ta standard vzpostavlja sistem za katalogizacijo napak v emajlih jeklenih plošč. Namenjen je za dosledno jezikovno uporabo glede označevanja in opisa značilnosti napak v emajlih. Ta standard je omejen na napake, ki jih je mogoče zaznati, in ne obravnava vseh vrst napak, ki se pojavljajo. Ne ocenjuje napak v emajlih; izvedena razvrstitev služi za prenos ali praktično znanje.

General Information

• Status: Published
• Publication Date: 28-Mar-2017
• Withdrawal Date: 29-Sep-2017
• ICS: 01.040.25 - Manufacturing engineering (Vocabularies)
• ICS: 25.220.50 - Enamels
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262/WG 5 - Vitreous enamel coatings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 29-Mar-2017
• Completion Date: 29-Mar-2017
• Ref Project: SIST EN ISO 19496-2:2017 - Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and descriptions (ISO 19496-2:2017)

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2017
6WHNODVWLLQNHUDPLþQLHPDMOL7HUPLQRORJLMDGHO9LGQLSULND]LQRSLV,62

Vitreous and porcelain enamels - Terminology - Part 2: Visual representations and
descriptions (ISO 19496-2:2017)
Email und Emaillierungen - Terminologie - Teil 2: Darstellung und Charakterisierung (ISO
19496-2:2017)
Émaux vitrifiés - Terminologie - Partie 2: Représentations visuelles et descriptions (ISO
19496-2:2017)
Ta slovenski standard je istoveten z: EN ISO 19496-2:2017
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.220.50 Emajlne prevleke Enamels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19496-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2017
EUROPÄISCHE NORM
ICS 01.040.25; 25.220.50
English Version
Vitreous and porcelain enamels - Terminology - Part 2:
Visual representations and descriptions (ISO 19496-
2:2017)
Émaux vitrifiés - Terminologie - Partie 2: Email und Emaillierungen - Terminologie - Teil 2:
Représentations visuelles et descriptions (ISO 19496- Darstellung und Charakterisierung (ISO 19496-
2:2017) 2:2017)
This European Standard was approved by CEN on 28 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19496-2:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 19496-2:2017) has been prepared by Technical Committee
ISO/TC 107 “Metallic and other inorganic coatings” in collaboration with Technical Committee
CEN/TC 262 “Metallic and other inorganic coatings, including for corrosion protection and corrosion
testing of metals and alloys” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2017, and conflicting national standards
shall be withdrawn at the latest by September 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19496-2:2017 has been approved by CEN as EN ISO 19496-2:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 19496-2
First edition
2017-03
Vitreous and porcelain enamels —
Terminology —
Part 2:
Visual representations and
descriptions
Émaux vitrifiés — Terminologie —
Partie 2: Représentations visuelles et descriptions
Reference number
ISO 19496-2:2017(E)
©
ISO 2017
ISO 19496-2:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 19496-2:2017(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Enamelling defects . 1
4.1 Chipping . 1
4.1.1 Further designations . 1
4.1.2 Description . 1
4.1.3 Origin and causes . 1
4.2 Lines . 3
4.2.1 Hairlines . 3
4.2.2 Bubble lines . 4
4.2.3 Watermarks . 5
4.2.4 Linear cracks . 6
4.3 Lumps . 6
4.3.1 Further designations . 6
4.3.2 Description . . . 6
4.3.3 Origin and causes . 6
4.4 Dimples . 7
4.4.1 Further designations . 7
4.4.2 Description . . . 7
4.4.3 Origin and causes . 7
4.5 Blisters . 8
4.5.1 Further designations . 8
4.5.2 Description . . . 8
4.5.3 Origin and causes . 8
4.6 Spots and specks . 9
4.6.1 Further designations . 9
4.6.2 Description . . . 9
4.6.3 Origin and causes . 9
4.7 Crawling .10
4.7.1 Further designations .10
4.7.2 Description . . .11
4.7.3 Origin and causes .11
4.8 Copperheads and burn-offs .11
4.8.1 Further designations .11
4.8.2 Description . . .12
4.8.3 Origin and causes .12
4.9 Fish scales .13
4.9.1 Further designations .13
4.9.2 Description . . .14
4.9.3 Origin and causes .14
4.10 Pinholes .14
4.10.1 Further designations .14
4.10.2 Description . . .14
4.10.3 Origin and causes .
...