EN 14973:2006+A1:2008

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

This European Standard specifies electrical and flammability safety requirements for conveyor belts intended for use in underground installations, in the presence of flammable or non-flammable atmospheres.
Conveyor belts covered by this European Standard and intended for use in flammable atmospheres are intended for use on conveyor belt installations (machinery in mines). The belt is a component, which will be incorporated into the conveyor, which is an equipment of Group I, Category M2, as defined in 3.2.2 of EN 13463-1:2001.
This European Standard is not applicable to light conveyor belts as described in EN 873 nor is it applicable to conveyor belts which are manufactured before the date of publication of this document by CEN.
This European Standard deals with those significant hazards detailed in A.1.
Attention is drawn to Annexes ZA and ZB.
NOTE   A summary of the requirements of this European Standard is given in Table 1.

Fördergurte für die Verwendung unter Tage - Elektrische und brandtechnische Sicherheitsanforderungen

Diese Europäische Norm legt elektrische und brandtechnische Sicherheitsanforderungen für Fördergurte für den Einsatz unter Tage bei entflammbarer und nicht entflammbarer Atmosphäre fest.
Fördergurte, die unter diese Europäische Norm fallen, sind vorgesehen für den Gebrauch in Förderanlagen beim Einsatz in entflammbaren Atmosphären (Bergwerken). Der Gurt ist eine Teil der Fördereinrichtung, die eine Ausrüstung nach Gruppe I, Kategorie M2, wie in EN 13463-1:2001, 3.2.2, bestimmt, darstellt.
Diese Europäische Norm ist nicht anwendbar auf in EN 873 beschriebene leichte Fördergurte als auch auf Fördergurte, die vor dem Datum der Veröffentlichung dieses Dokumentes durch CEN hergestellt wurden.
Diese Europäische Norm behandelt die in A.1 aufgeführten signifikanten Gefahren.
Aufmerksamkeit wird auf die Anhänge ZA und ZB gelenkt.
ANMERKUNG   Tabelle 1 gibt eine Zusammenfassung der Anforderungen dieser Europäischen Norm.

Courroies transporteuses pour usage dans les installations souterraines - Exigences de sécurité électrique et protection contre l'inflammabilité

La présente Norme Européenne spécifie des exigences en matière de sécurité électrique et de protection contre l’inflammabilité, applicables aux courroies transporteuses destinées à être utilisées dans des installations souterraines, en atmosphères inflammables ou non inflammables.
Les courroies transporteuses couvertes par la présente Norme européenne et destinées à être utilisées en atmosphères inflammables sont destinées aux installations à courroies transporteuses (machines dans les mines). La courroie est un composant, qui est incorporée dans le convoyeur, qui est lui-même un équipement du Groupe 1, Catégorie M2, tel que défini en 3.2.2 de l’EN 13463-1:2001.
La présente Norme européenne n’est pas applicable aux courroies transporteuses légères telles que décrites dans l’EN 873, ni aux courroies qui ont été fabriquées avant la publication du présent document par le CEN.
La présente Norme européenne traite des phénomènes dangereux significatifs détaillés en A.1.
L’attention est attirée sur les Annexes ZA et ZB.
NOTE   Un résumé des exigences de la présente Norme européenne est donné au Tableau 1.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev za podzemno vgradnjo - Električne in požarnovarnostne zahteve

General Information

• Status: Withdrawn
• Publication Date: 08-Apr-2008
• Withdrawal Date: 17-Nov-2015
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 53.040.10 - Conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 3 - Safety requirements for conveyor belting
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Nov-2015
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Ref Project: SIST EN 14973:2007+A1:2008 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements

Relations

• Merged From: EN 14973:2006 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
• Effective Date: 22-Dec-2008
• Merged From: EN 14973:2006/AC:2007 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
• Effective Date: 22-Dec-2008
• Replaced By: EN 14973:2015 - Conveyor belts for use in underground installations - Electrical and flammability safety requirements
• Effective Date: 25-Nov-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Conveyor belts for use in underground installations - Electrical and flammability safety requirementsCourroies transporteuses pour usage dans les installations souterraines - Exigences de sécurité électrique et protection contre l'inflammabilitéFördergurte für die Verwendung unter Tage - Elektrische und brandtechnische Sicherheitsanforderungen53.040.10TransporterjiConveyors13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:SIST EN 14973:2007+A1:2008en,frTa slovenski standard je istoveten z:EN 14973:2006+A1:200801-julij-2008SIST EN 14973:2007+A1:2008SLOVENSKI
STANDARD







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14973:2006+A1
April 2008 ICS 13.220.40; 53.040.10 Supersedes EN 14973:2006 English Version
Conveyor belts for use in underground installations - Electrical and flammability safety requirements
Courroies transporteuses pour usage dans les installations souterraines - Exigences de sécurité électrique et protection contre l'inflammabilité
Fördergurte für die Verwendung unter Tage - Elektrische und brandtechnische Sicherheitsanforderungen This European Standard was approved by CEN on 19 June 2006 and includes Corrigendum 1 issued by CEN on 24 January 2007 and Amendment 1 approved by CEN on 21 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14973:2006+A1:2008: E



EN 14973:2006+A1:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 Ignition hazard assessment.7 5 Electrical resistance.7 6 Frictional heating.7 7 Resistance to ignition.8 8 Fire propagation.8 9 Marking.9 Annex A (normative)
Hazards and risk assessment.11 Annex B (informative)
Example of an ignition hazard assessment for a conveyor belt intended for use in a potentially explosive atmosphere.13 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.
...