EN ISO 9241-305:2008
(Main)Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays (ISO 9241-305:2008)
Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays (ISO 9241-305:2008)
ISO 9241-305:2008 establishes optical test and expert observation methods for use in predicting the performance of a display vis-à-vis the ergonomics requirements given in ISO 9241-303.
Ergonomie der Mensch-System-Interaktion - Teil 305: Optische Laborprüfverfahren für elektronische optische Anzeigen (ISO 9241-305:2008)
Dieser Teil von ISO 9241 legt optische Prüfverfahren und Beobachtungsverfahren durch Fachleute fest, die
zur Vorhersage der Leistungsfähigkeit eines Bildschirms hinsichtlich der in ISO 9241-303 festgelegten
ergonomischen Anforderungen verwendet werden.
Ergonomie de l'interaction homme-système - Partie 305: Méthodes d'essai de laboratoire optique pour écrans de visualisation électroniques (ISO 9241-305:2008)
L'ISO 9241-305:2008 établit des méthodes d'essai optique et des méthodes d'observation d'expert qui peuvent être utilisées pour prévoir la performance d'un affichage vis-à-vis des exigences ergonomiques données dans l'ISO 9241-303.
Ergonomija medsebojnega vpliva človek-sistem - 305. del: Laboratorijske optične preskusne metode za elektronske slikovne zaslone (ISO 9241-305:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2009
(UJRQRPLMDPHGVHERMQHJDYSOLYDþORYHNVLVWHPGHO /DERUDWRULMVNHRSWLþQH
SUHVNXVQHPHWRGH]DHOHNWURQVNHVOLNRYQH]DVORQH ,62
Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for
electronic visual displays (ISO 9241-305:2008)
Ergonomie der Mensch-System-Interaktion - Teil 305: Optische Laborprüfverfahren für
elektronische optische Anzeigen (ISO 9241-305:2008)
Ergonomie de l'interaction homme-systeme - Partie 305: Méthodes d'essai de laboratoire
optique pour écrans visuels électroniques (ISO 9241-305:2008)
Ta slovenski standard je istoveten z: EN ISO 9241-305:2008
ICS:
13.180 Ergonomija Ergonomics
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9241-305
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 13.180; 35.180
English Version
Ergonomics of human-system interaction - Part 305: Optical
laboratory test methods for electronic visual displays (ISO 9241-
305:2008)
Ergonomie de l'interaction homme-système - Partie 305: Ergonomie der Mensch-System-Interaktion - Teil 305:
Méthodes d'essai de laboratoire optique pour écrans de Optische Laborprüfverfahren für elektronische optische
visualisation électroniques (ISO 9241-305:2008) Anzeigen (ISO 9241-305:2008)
This European Standard was approved by CEN on 1 November 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9241-305:2008: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 9241-305:2008) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 "Ergonomics", the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the
latest by May 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9241-305:2008 has been approved by CEN as a EN ISO 9241-305:2008 without any
modification.
INTERNATIONAL ISO
STANDARD 9241-305
First edition
2008-11-15
Ergonomics of human-system
interaction —
Part 305:
Optical laboratory test methods
for electronic visual displays
Ergonomie de l'interaction homme-système —
Partie 305: Méthodes d'essai de laboratoire optique pour écrans
de visualisation électroniques
Reference number
ISO 9241-305:2008(E)
©
ISO 2008
ISO 9241-305:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 9241-305:2008(E)
Contents Page
Foreword .iv
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 General .1
4.1 Measurements — Basic measurements and derived procedures .1
4.2 Structure.2
4.3 Matrix of measurement conditions methods and procedures.2
5 Measurement conditions .2
5.1 Preparations and procedures .2
5.2 Test accessories.7
5.3 Test patterns .13
5.4 Alignment — Measurement location and meter position.25
5.5 Light measuring device (LMD) .28
5.6 Measurement field .30
5.7 Angular aperture.30
5.8 Meter time response.31
5.9 Test illumination .31
5.10 Other ambient test conditions.43
6 Measurement methods .44
6.1 Basic light measurements.44
6.2 Luminance profile measurements .52
6.3 Directional light measurements.54
6.4 Temporal performance measurements .56
6.5 Reflection measurements.72
6.6 Luminance analysis .85
6.7 Contrast analysis.94
6.8 Colour analysis.105
6.9 Dimensions and geometries .113
6.10 Geometrics and defects.127
6.11 Alignment of virtual image displays.145
7 Conformance .159
Annex A (informative) Overview of the ISO 9241 series .160
Annex B (informative) Guidelines for measurement method types.164
Annex C (informative) Matrix of measurement procedures and their sources .166
Annex D (informative) Bidirectional reflectance distribution function (BRDF) .175
Annex E (informative) Uncertainty analysis guidelines .177
Annex F (informative) Reconstruction of luminance distribution by microstepping .182
Bibliography.183
ISO 9241-305:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9241-305 was prepared by Technical Committee ISO/TC 159, Ergonomics, Subcommittee SC 4,
Ergonomics of human-system interaction.
This first edition of ISO 9241-305, together with ISO 9241-302, cancels and replaces ISO 13406-1:1999 and
ISO 9241-8:1997. Together with ISO 9241-302, ISO 9241-303 and ISO 9241-307, it also cancels and
replaces ISO 9241-7:1998 and ISO 13406-2:2001, and partially replaces ISO 9241-3:1992. The following has
been technically revised:
⎯ terms and definitions related to electronic visual displays have been transferred to, and collected in,
ISO 9241-302;
⎯ while the areas previously covered in ISO 9241 and by ISO 13406 remain essentially unchanged, test
methods and requirements have been updated to account for advances in sc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.