EN 12574-3:2002
(Main)Stationary waste containers - Part 3: Safety and health requirements
Stationary waste containers - Part 3: Safety and health requirements
This part of the European Standard specifies essential safety and health requirements for stationary waste con-tainers, not including special containers for hazardous waste.
Stationäre Abfallsammelbehälter - Teil 3: Sicherheits- und Gesundheitsanforderungen
Dieser Teil der Europäischen Norm legt wichtige Sicherheits- und Gesundheitsanforderungen für stationäre Abfallsammelbehälter (im folgenden auch kurz Behälter genannt) fest. Er behandelt keine Spezialbehälter für gefährlichen Abfall.
Conteneurs fixes à déchets - Partie 3: Exigences d'hygiène et de sécurité
La présente partie de la Norme européenne prEN 12574 spécifie les exigences essentielles de sécurité et d'hygiène pour les conteneurs fixes pour déchets solides, mais ne concerne pas les conteneurs spéciaux pour déchets dangereux.
Stationary waste containers - Part 3: Safety and health requirements
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stationary waste containers - Part 3: Safety and health requirementsStationäre Abfallsammelbehälter - Teil 3: Sicherheits- und GesundheitsanforderungenConteneurs fixes a déchets - Partie 3: Exigences d'hygiene et de sécuritéStationary waste containers - Part 3: Safety and health requirements13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:Ta slovenski standard je istoveten z:EN 12574-3:2002SIST EN 12574-3:2004en01-januar-2004SIST EN 12574-3:2004SLOVENSKI
STANDARD
SIST EN 12574-3:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12574-3February 2002ICS 13.030.40English versionStationary waste containers - Part 3: Safety and healthrequirementsConteneurs fixes à déchets - Partie 3: Exigences d'hygièneet de sécuritéStationäre Abfallsammelbehälter - Teil 3: Sicherheits- undGesundheitsanforderungenThis European Standard was approved by CEN on 22 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12574-3:2002 ESIST EN 12574-3:2004
EN 12574-3:2002 (E)2ContentspageForeword.31Scope.42Normative references.43General requirements of construction.44Handles.45Wheels.56Immobilization.67Edges.68Lids for manual handling.69Cleaning.610Marking.611Information for use.6Annex A (informative)
Stability condition.8Annex B (informative)
A-Deviations.9SIST EN 12574-3:2004
EN 12574-3:2002 (E)3ForewordThis European Standard has been prepared by CEN/TC 183 "Waste Management", the secretariat of which is heldby DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by August 2002, and conflicting national standards shall be withdrawn at the latest byAugust 2002.This European Standard is one part of the series of standards of EN 12574 about "Stationary waste containers"comprising the following Parts:Part 1:Containers with a capacity from 1 700 l to 5 000 l with flat or dome lid(s), for trunnion, double trunnion orpocket lifting devices – Dimensions and design;Part 2:Performance requirements and test methods;Part 3: Safety and health requirements.To help in the understanding of the requirements they are not split into separate safety, ergonomic and healthsections but are divided into chapters dealing with constructional units.The annexes A and B are informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 12574-3:2004
EN 12574-3:2002 (E)41 ScopeThis part of the European Standard specifies essential safety and health requirements for stationary waste con-tainers (in the text also called containers), not including special containers for hazardous waste.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of this publication apply to this EuropeanStandard only when incorporat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.