prEN ISO 4892-1

Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO/DIS 4892-1:2023)

ISO 4892-1:2016 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing plastics to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated weathering or artificial accelerated irradiation devices.
NOTE          In this part of ISO 4892, the term "light source" refers to radiation sources that emit UV radiation, visible radiation, infrared radiation or any combination of these types of radiation.
ISO 4892-1:2016 also provides information on the interpretation of data from artificial accelerated weathering or artificial accelerated irradiation exposures. More specific information about methods for determining the change in the properties of plastics after exposure and reporting these results is given in ISO 4582.

Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 1: Allgemeine Anleitung (ISO/DIS 4892‑1:2023)

Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 1: Lignes directrices générales (ISO/DIS 4892-1:2023)

ISO 4892-1:2016 fournit des informations et un guide général pour la sélection et l'application des méthodes d'exposition détaillées dans les autres parties de la norme. Elle décrit également les exigences générales de performance des dispositifs utilisés pour exposer les plastiques aux sources lumineuses de laboratoire. Les informations relatives aux exigences de performance sont destinées aux fabricants d'appareillages d'essai de vieillissement accéléré artificiel ou d'irradiation accélérée artificielle.
NOTE          Dans la présente partie de l'ISO 4892, le terme "source lumineuse" désigne les sources de rayonnement qui émettent un rayonnement UV, visible ou infrarouge, ou toute combinaison de ces types de rayonnement.
ISO 4892-1:2016 fournit également des informations sur l'interprétation des données issues des essais de vieillissement accéléré artificiel ou d'irradiation accélérée artificielle. Des informations plus spécifiques sur les méthodes de détermination des changements de propriétés des plastiques après exposition et de notification des résultats sont données dans l'ISO 4582.

Polimerni materiali - Metode izpostavljanja laboratorijskim virom svetlobe - 1. del: Splošna navodila (ISO/DIS 4892-1:2023)

General Information

• Status: Not Published
• Publication Date: 27-Apr-2025
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 26-Dec-2023
• Completion Date: 26-Dec-2023
• Ref Project: oSIST prEN ISO 4892-1:2023 - Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO/DIS 4892-1:2023)

Relations

• Revises: EN ISO 4892-1:2016 - Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 4892-1:2023
01-december-2023
Polimerni materiali - Metode izpostavljanja laboratorijskim virom svetlobe - 1. del:
Splošna navodila (ISO/DIS 4892-1:2023)
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
(ISO/DIS 4892-1:2023)
Kunststoffe - Künstliches Bestrahlen oder Bewittern in Geräten - Teil 1: Allgemeine
Anleitung (ISO/DIS 4892-1:2023)
Plastiques - Méthodes d'exposition à des sources lumineuses de laboratoire - Partie 1:
Lignes directrices générales (ISO/DIS 4892-1:2023)
Ta slovenski standard je istoveten z: prEN ISO 4892-1
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 4892-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 4892-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 4892-1:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4892-1
ISO/TC 61/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-10-03 2023-12-26
Plastics — Methods of exposure to laboratory light
sources —
Part 1:
General guidance
Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire —
Partie 1: Lignes directrices générales
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4892-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 4892-1:2023
ISO/DIS 4892-1:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4892-1
ISO/TC 61/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:

Plastics — Methods of exposure to laboratory light
sources —
Part 1:
General guidance
Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire —
Partie 1: Lignes directrices générales
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4892-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 4892-1:2023
ISO/DIS 4892-1:2023(E)
Contents Page
Foreword .iv
Introduction . vi
1 Scope . 1
2 Normative references .
...