EN ISO 22526-2:2021

Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)

This document defines the material carbon footprint as the amount (mass) of CO2 removed from the air and incorporated into plastic, and specifies a determination method to quantify it.
This document is applicable to plastic products, plastic materials and polymer resins that are partly or wholly based on biobased constituents.

Kunststoffe - Kohlenstoff- und Umweltbilanz von biobasierten Kunststoffen - Teil 2: Kohlenstoffbilanz des Materials, Menge (Masse) des aus der Luft entfernten und in das Polymermolekül integrierten CO2 (ISO 22526 2:2020)

Plastiques - Empreinte carbone et environnementale des plastiques biosourcés - Partie 2: Empreinte carbone des matériaux, quantité (masse) de CO2 captée dans l'air et incorporée dans les molécules de polymères (ISO 22526-2:2020)

Le présent document définit l’empreinte carbone du matériau comme étant la quantité (masse) de CO2 captée dans l’air et incorporée dans un plastique, et il spécifie une méthode de détermination pour la quantifier.
Le présent document s’applique aux produits plastiques, aux matériaux plastiques et aux résines polymères qui sont fabriqués partiellement ou entièrement à partir de constituants biosourcés.

Polimerni materiali - Ogljični in okoljski odtis polimernih materialov na biološki osnovi - 2. del: Ogljični odtis materialov, količina (masa) CO2, odstranjena iz zraka in vključena v molekulo polimera (ISO 22526-2:2020)

Ta dokument opredeljuje ogljični odtis materiala kot količino (maso) CO2, odstranjeno iz zraka in dodano polimernemu materialu, ter določa metodo določanja za njegovo količinsko opredelitev.
Ta dokument se uporablja za izdelke iz polimernih materialov, polimerne materiale in polimerne smole, ki so delno ali v celoti osnovani na bioloških sestavinah.

General Information

• Status: Published
• Publication Date: 09-Nov-2021
• Withdrawal Date: 30-May-2022
• ICS: 13.020.40 - Pollution, pollution control and conservation
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Nov-2021
• Due Date: 21-Aug-2023
• Completion Date: 10-Nov-2021
• Ref Project: SIST EN ISO 22526-2:2022 - Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22526-2:2022
01-januar-2022
Polimerni materiali - Ogljični in okoljski odtis polimernih materialov na biološki
osnovi - 2. del: Ogljični odtis materialov, količina (masa) CO2, odstranjena iz zraka
in vključena v molekulo polimera (ISO 22526-2:2020)
Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material
carbon footprint, amount (mass) of CO2 removed from the air and incorporated into
polymer molecule (ISO 22526-2:2020)
Kunststoffe - Kohlenstoff- und Umweltbilanz von biobasierten Kunststoffen - Teil 2:
Kohlenstoffbilanz des Materials, Menge (Masse) des aus der Luft entfernten und in das
Polymermolekül integrierten CO2 (ISO 22526 2:2020)
Plastiques - Empreinte carbone et environnementale des plastiques biosourcés - Partie
2: Empreinte carbone des matériaux, quantité (masse) de CO2 captée dans l'air et
incorporée dans les molécules de polymères (ISO 22526-2:2020)
Ta slovenski standard je istoveten z: EN ISO 22526-2:2021
ICS:
13.020.40 Onesnaževanje, nadzor nad Pollution, pollution control
onesnaževanjem in and conservation
ohranjanje
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 22526-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22526-2:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 22526-2:2022


EN ISO 22526-2
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2021
EUROPÄISCHE NORM
ICS 13.020.40; 83.080.01
English Version

Plastics - Carbon and environmental footprint of biobased
plastics - Part 2: Material carbon footprint, amount (mass)
of CO2 removed from the air and incorporated into
polymer molecule (ISO 22526-2:2020)
Plastiques - Empreinte carbone et environnementale Kunststoffe - Kohlenstoff- und Umweltbilanz von
des plastiques biosourcés - Partie 2: Empreinte biobasierten Kunststoffen - Teil 2: Kohlenstoffbilanz
carbone des matériaux, quantité (masse) de CO2 des Materials, Menge (Masse) des aus der Luft
captée dans l'air et incorporée dans les molécules de entfernten und in das Polymermolekül integrierten
polymères (ISO 22526-2:2020) CO2 (ISO 22526 2:2020)
This European Standard was approved by CEN on 8 November 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22526-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22526-2:2022
EN ISO 22526-2:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22526-2:2022
EN ISO 22526-2:2021 (E)
European foreword
The text of ISO 22526-2:2020 has been prepared by Technical Committee ISO/TC 61 "Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 22526-2:2021
by Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directe
...