EN ISO 11339:2010
(Main)Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
ISO 11339:2010 specifies a T‑peel test for the determination of the peel strength of an adhesive by measuring the peeling force of a T‑shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.
This method was originally developed for use with metal adherends, but other, flexible, adherends may also be used.
Klebstoffe - T-Schälprüfung für geklebte Verbindungen aus flexiblen Fügeteilen (ISO 11339:2010)
Diese Internationale Norm legt eine T-Schälprüfung fest für die Bestimmung der Schälfestigkeit eines
Klebstoffes durch Messung der Schälkraft einer T-förmigen Klebung zweier flexibler Fügeteile. Dieses Prüfverfahren
liefert keine Informationen zur Konstruktion.
ANMERKUNG Dieses Verfahren wurde ursprünglich für Metallfügeteile entwickelt, aber andere, flexible, Fügeteile
können ebenso verwendet werden.
Adhésifs - Essai de pelage en T d'assemblages collés flexible sur flexible (ISO 11339:2010)
L'ISO 11339:2010 spécifie un essai de pelage en T pour la détermination de la résistance au pelage d'un adhésif par mesurage de la force de pelage d'un assemblage collé en forme de T, formé de deux supports flexibles. Ce mode opératoire d'essai ne fournit aucune information concernant la conception.
Cette méthode a été mise au point à l'origine pour des supports métalliques, mais elle peut également être utilisée pour d'autres supports flexibles.
Lepila - T-preskus luščenja za lepljenje dveh gibkih lepljencev (ISO 11339:2010)
Ta mednarodni standard določa T-preskus luščenja za ugotavljanje luščilne moči lepila z merjenjem luščilne sile dveh gibkih lepljencev, zlepljenih v obliki črke T. Ta preskusni postopek ne zagotavlja informacij o zasnovi.
OPOMBA: Ta metoda je bila prvotno razvita za uporabo s kovinskimi lepljenci, lahko pa se uporabljajo tudi drugi, gibki lepljenci.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2011
1DGRPHãþD
SIST EN ISO 11339:2005
/HSLOD7SUHVNXVOXãþHQMD]DOHSOMHQMHGYHKJLENLKOHSOMHQFHY ,62
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010)
Klebstoffe - T-Schälprüfung für geklebte Verbindungen aus flexiblen Fügeteilen (ISO
11339:2010)
Adhésifs - Essai de pelage en T d'assemblages collés flexible sur flexible (ISO
11339:2010)
Ta slovenski standard je istoveten z: EN ISO 11339:2010
ICS:
83.180 Lepila Adhesives
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11339
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2010
ICS 83.180 Supersedes EN ISO 11339:2005
English Version
Adhesives - T-peel test for flexible-to-flexible bonded assemblies
(ISO 11339:2010)
Adhésifs - Essai de pelage en T d'assemblages collés Klebstoffe - T-Schälprüfung für geklebte Verbindungen aus
flexible sur flexible (ISO 11339:2010) flexiblen Fügeteilen (ISO 11339:2010)
This European Standard was approved by CEN on 11 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11339:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 11339:2010) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by AENOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2010, and conflicting national standards shall be withdrawn at
the latest by August 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11339:2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11339:2010 has been approved by CEN as a EN ISO 11339:2010 without any modification.
INTERNATIONAL ISO
STANDARD 11339
Third edition
2010-02-15
Adhesives — T-peel test for flexible-to-
flexible bonded assemblies
Adhésifs — Essai de pelage en T d'assemblages collés flexible sur
flexible
Reference number
ISO 11339:2010(E)
©
ISO 2010
ISO 11339:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 11339:2010(E)
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Principle.2
5 Apparatus.2
6 Test specimens.2
7 Procedure.3
8 Expression of results.4
9 Precision.4
10 Test report.5
Bibliography.6
ISO 11339:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11339 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.
This third edition cancels and replaces the second edition (ISO 11339:2003), of which it constitutes a minor
revision. The main changes are as follows:
a) the normative references have been updated;
b) explanatory footnotes have been added to Subclause 6.3;
c) the peel strength values calculated are reported in newtons per 100 mm of specimen width (as opposed
to kilonewtons per metre in the previous edition).
In addition, a number of editorial changes have been made to improve the clarity of the text.
iv © ISO 2010 – All rights reserved
INTERNATIONAL STANDARD ISO 11339:2010(E)
Adhesives — T-peel test for flexible-to-flexible bonded
assemblies
SAFETY STATEMENT — Perso
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.