EN 13880-4:2003

Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value

This European Standard describes a method for determining the effects of storage at elevated temperatures on samples of hot applied joint sealants by comparing the cone penetration and resilience values before and after storage.

Heiß verarbeitbare Fugenmassen - Teil 4: Prüfverfahren zur Bestimmung der Wärmebeständigkeit - Änderung der Konus-Penetration

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Auswirkungen der Wärmelagerung auf heiß verarbeitbare Fugenmassen durch Vergleich der Werte von Konus-Penetration und elastischem Rückstellvermögen vor und nach der Wärmelagerung.

Produits de scellement de joints appliqués à chaud - Partie 4: Méthode d'essai pourla détermination de la résistance à là chaleur - Variation de la pénétrabilité

Tesnilne mase za stike, ki se vgrajujejo po vročem postopku – 4. del: Preskusna metoda za ugotavljanje odpornosti proti toploti – Sprememba penetracije

General Information

• Status: Withdrawn
• Publication Date: 10-Jun-2003
• Withdrawal Date: 20-Aug-2024
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13880-4:2004 - Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value

Relations

• Replaced By: EN 13880-4:2024 - Hot applied joint sealants - Part 4: Test method for the characterization of heat resistance - Change in penetration value
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDFLMHHeiß verarbeitbare Fugenmassen - Teil 4: Prüfverfahren zur Bestimmung der Wärmebeständigkeit - Änderung der Konus-PenetrationProduits de scellement de joints appliqués a chaud - Partie 4: Méthode d'essai pourla détermination de la résistance a la chaleur - Variation de la pénétrabilitéHot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-4:2003SIST EN 13880-4:2004en01-junij-2004SIST EN 13880-4:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-4June 2003ICS 93.080.20English versionHot applied joint sealants - Part 4: Test method for thedetermination of heat resistance - Change in penetration valueProduits de scellement de joints appliqués à chaud - Partie4: Méthode d'essai pourla détermination de la résistance àlà chaleur - Variation de la pénétrabilitéHeiß verarbeitbare Fugenmassen - Teil 4: Prüfverfahrenzur Bestimmung der Wärmebeständigkeit - Änderung derKonus-PenetrationThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-4:2003 ESIST EN 13880-4:2004
...