iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1753:1997

(Main)

Magnesium and magnesium alloys - Magnesium alloy ingots and castings

Magnesium and magnesium alloys - Magnesium alloy ingots and castings

This European Standard specifies the chemical composition of magnesium alloys for ingots. It also specifies the chemical composition of magnesium alloy castings. It also specifies the mechanical properties of separately cast samples of these alloys (see clause 6). By agreement, it also specifies the mechanical properties of magnesium alloys castings determined from samples cut from a casting.

Magnesium und Magnesiumlegierungen - Blockmetalle und Gußstücke aus Magnesiumlegierungen

Diese europäische Norm legt die chemische Zusammensetzung von Magnesium- legierungen für Blockmetalle fest. Ferner legt sie die chemische Zusammensetzung von Magnesiumlegierungen für Gußstücke fest. Außerdem sind die mechanischen Eigenschaften von getrennt gegossenen Probestücken aus diesen Legierungen (siehe Abschnitt 6) festgelegt, des weiteren nach Vereinbarung die mechanischen Eigenschaften von Magnesiumlegierungen für Gußstücke, die an ausdem Gußstück entnommenen Probestücken ermittelt werden.

Magnésium et alliages de magnésium - Lingots et pièces moulées en alliages de magnésium

La présente norme européenne spécifie la composition chimique des alliages de m magnésium pour les lingots. Elle spécifie également la composition chimique des alliages de magnésium pour les pièces moulées. Elle spécifie également les caractéristiques mécaniques d'échantillons coulés à part de ces alliages (voir article 6). Sur accord, elle spécifie également les caractéristiques mécaniques des alliages de magnésium pour des pièces moulées, déterminées à partir d'échantillons découpés dans une pièce moulée.

Magnezij in magnezijeve zlitine - Ingoti in ulitki iz magnezijevih zlitin

General Information

Status
Withdrawn
Publication Date
17-Jun-1997
Withdrawal Date
24-Sep-2019
ICS
77.150.20 - Magnesium products
Technical Committee
CEN/TC 190 - Foundry technology
Drafting Committee
CEN/TC 190/WG 9 - Cast magnesium
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
25-Sep-2019
Ref Project
SIST EN 1753:1998 - Magnesium and magnesium alloys - Magnesium alloy ingots and castings

Relations

Replaced By
EN 1753:2019 - Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Effective Date
20-Sep-2017
Corrected By
EN 1753:1997/AC:1997 - Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Effective Date
08-Jun-2022
Child
EN 1754:1997 - Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system
Effective Date
22-Dec-2008

Buy Standard

EN 1753:1998EN 1753:1998
PreviousNext
Standard
EN 1753:1998
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Magnezij in magnezijeve zlitine - Ingoti in ulitki iz magnezijevih zlitinMagnesium und Magnesiumlegierungen - Blockmetalle und Gußstücke aus MagnesiumlegierungenMagnésium et alliages de magnésium - Lingots et pieces moulées en alliages de magnésiumMagnesium and magnesium alloys - Magnesium alloy ingots and castings77.150.20Magnezijevi izdelkiM
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1753:2019(Main)
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
SIST EN 1753:2019

This document defines the grades and the corresponding requirements for cast alloyed magnesium materials.
This document specifies 2 groups of magnesium alloy grades by a classification based on the chemical composition. The first group deals with grades for magnesium alloy ingots. The second group deals with grades for magnesium alloy castings.
This document also specifies mechanical properties measured on test pieces machined from cast samples.
This document does not cover technical delivery conditions for magnesium alloy castings (see EN 1559-1 [7] and EN 1559-5 [8]).

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12438:2017(Main)
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
SIST EN 12438:2017

This European Standard specifies the grades and the corresponding requirements for magnesium alloys for cast anodes.
This European Standard specifies 2 groups of cast magnesium alloy grades by a classification based on chemical composition. The first group deals with magnesium alloy ingots for anodes. The second group deals with magnesium alloy anode castings.
This European Standard specifies chemical composition, designation, testing and inspection documentation.
This European Standard does not cover technical delivery conditions for magnesium alloy anode castings (see EN 1559-1 [3] and EN 1559-5 [4]).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1559-5:2017(Main)
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
SIST EN 1559-5:2017

This part of EN 1559 specifies the additional technical delivery conditions for castings, see EN 1753 and cast anodes, see EN 12438 made from magnesium alloys.
This part of EN 1559 applies to magnesium alloy castings produced in sand or permanent moulds or by pressure die casting, centrifugal casting, continuous casting or investment casting.
This part of EN 1559 does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as re-melting or extrusion.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1754:2015(Main)
Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers
SIST EN 1754:2015

This European Standard specifies a material designation system for magnesium and magnesium alloys either by numbers or by symbols for castings including anodes and ingots intended for remelting.
The designation system by numbers is only applicable to standardized magnesium and magnesium alloys (see 2.1).
The designation system by symbols is applicable to
a)   standardized magnesium and magnesium alloys (see 2.1);
b)   non-standardized magnesium and magnesium alloys (see 2.2).
NOTE 1   The standardized designation by symbols does not necessarily imply that the material is standardized.
NOTE 2   Magnesium and magnesium alloys for aerospace applications referred to in European standards prepared by AECMA (fr: Association Européenne des Constructeurs de Matériel Aérospatial) have different designations.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1753:2019(Main)
Magnesium and magnesium alloys - Magnesium alloy ingots and castings
SIST EN 1753:2019

This document defines the grades and the corresponding requirements for cast alloyed magnesium materials.
This document specifies 2 groups of magnesium alloy grades by a classification based on the chemical composition. The first group deals with grades for magnesium alloy ingots. The second group deals with grades for magnesium alloy castings.
This document also specifies mechanical properties measured on test pieces machined from cast samples.
This document does not cover technical delivery conditions for magnesium alloy castings (see EN 1559-1 [7] and EN 1559-5 [8]).

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12438:2017(Main)
Magnesium and magnesium alloys - Magnesium alloys for cast anodes
SIST EN 12438:2017

This European Standard specifies the grades and the corresponding requirements for magnesium alloys for cast anodes.
This European Standard specifies 2 groups of cast magnesium alloy grades by a classification based on chemical composition. The first group deals with magnesium alloy ingots for anodes. The second group deals with magnesium alloy anode castings.
This European Standard specifies chemical composition, designation, testing and inspection documentation.
This European Standard does not cover technical delivery conditions for magnesium alloy anode castings (see EN 1559-1 [3] and EN 1559-5 [4]).

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1559-5:2017(Main)
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
SIST EN 1559-5:2017

This part of EN 1559 specifies the additional technical delivery conditions for castings, see EN 1753 and cast anodes, see EN 12438 made from magnesium alloys.
This part of EN 1559 applies to magnesium alloy castings produced in sand or permanent moulds or by pressure die casting, centrifugal casting, continuous casting or investment casting.
This part of EN 1559 does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as re-melting or extrusion.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 755-9:2016(Main)
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
SIST EN 755-9:2016

This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded profile with a cross section contained within a circumscribing circle not greater than 800 mm (see Figure 1).
The temper designations used in this part are according to EN 515.
This European Standard applies to extruded profiles for general engineering applications only.
(...)

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1754:2015(Main)
Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers
SIST EN 1754:2015

This European Standard specifies a material designation system for magnesium and magnesium alloys either by numbers or by symbols for castings including anodes and ingots intended for remelting.
The designation system by numbers is only applicable to standardized magnesium and magnesium alloys (see 2.1).
The designation system by symbols is applicable to
a)   standardized magnesium and magnesium alloys (see 2.1);
b)   non-standardized magnesium and magnesium alloys (see 2.2).
NOTE 1   The standardized designation by symbols does not necessarily imply that the material is standardized.
NOTE 2   Magnesium and magnesium alloys for aerospace applications referred to in European standards prepared by AECMA (fr: Association Européenne des Constructeurs de Matériel Aérospatial) have different designations.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day