Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures

In accordance to the general delivery condiions of EN 10213-1 this standard specifies the chemcal and mechanical requirements to be met under specific inspection of steel grades for use at low temperatures.

Technische Lieferbedingungen für Stahlguß für Druckbehälter - Teil 3: Stahlsorten für die Verwendung bei tiefen Temperaturen

Entsprechend den allgemeinen technischen Lieferbedingungen nach EN 10213-1 legt diese Norm die bei spezifischer Prüfung einzuhaltenden chemischen und mechanischen Anforderungen der Stahlsorten für die Verwendung bei tiefen Temperaturen fest.

Conditions techniques de livraison des pièces moulées en acier pour service sous pression - Partie 3: Nuances d'acier pour utilisation à basses températures

En accord avec les conditions générales de livraison de l'EN 10213-1, cette norme précise les caractéristiques chimiques et mécaniques requises qui doivent être satisfaites lors d'un contrôle spécifique des nuances d'acier destinées à être utilisées à basses tempéraures.

Tehnični dobavni pogoji za jeklene ulitke za tlačne posode - 3. del: Vrste jekel za uporabo pri nizkih temperaturah

General Information

Status

Withdrawn

Publication Date

12-Dec-1995

Withdrawal Date

06-Nov-2007

ICS

77.140.30 - Steels for pressure purposes

Technical Committee

ECISS/TC 111 - Steel castings and forgings

Drafting Committee

ECISS/TC 31 - Steel castings

Current Stage

9960 - Withdrawal effective - Withdrawal

Start Date

07-Nov-2007

Completion Date

07-Nov-2007

Directive

97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment

Mandate

M/071 - Mandate to CEN for standardization in the field of Pressure equipment

Ref Project

SIST EN 10213-3:1997 - Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures

Relations

Replaced By

EN 10213:2007 - Steel castings for pressure purposes

Effective Date

22-Dec-2008

Buy Standard

Standard

EN 10213-3:1997

English language

5 pages

sale 10% off

Preview

sale 10% off

Preview

e-Library read for

1 day

Standards Content (Sample)

EN 10213-3:1997

SLOVENSKI STANDARD
SIST EN 10213-3:1997
01-december-1997
7HKQLþQLGREDYQLSRJRML]DMHNOHQHXOLWNH]DWODþQHSRVRGHGHO9UVWHMHNHO]D
XSRUDERSULQL]NLKWHPSHUDWXUDK
Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel
grades for use at low temperatures
Technische Lieferbedingungen für Stahlguß für Druckbehälter - Teil 3: Stahlsorten für die
Verwendung bei tiefen Temperaturen
Conditions techniques de livraison des pieces moulées
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN

EN 10222-4:2017+A1:2021(Main + Amendment)

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength

SIST EN 10222-4:2017+A1:2021

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of weldable fine grain steels with high proof strength.
NOTE Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

Standard
15 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 10222-2:2017+A1:2021(Main + Amendment)

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties

SIST EN 10222-2:2017+A1:2021

This part of this European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of ferritic and martensitic steels with specified elevated temperature properties. Chemical composition and mechanical properties are specified.
NOTE Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery condition is given in EN 10021.

Standard
27 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 10222-5:2017(Main)

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels

SIST EN 10222-5:2017

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of stainless steels, including creep resisting steels. Chemical composition and mechanical properties are specified.
NOTE Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222−5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

Standard
29 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 10222-3:2017(Main)

Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties

SIST EN 10222-3:2017

This European Standard specifies the technical delivery conditions of forgings for pressure purposes, made of nickel steels, for use at low temperatures.
NOTE Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

Standard
15 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 10222-1:2017(Main)

Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

SIST EN 10222-1:2017

This Part of this European Standard specifies the general technical delivery conditions for open die steel forgings, ring rolled products and forged bars for pressure purposes.
NOTE Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222−5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

Standard
24 pages
English language
sale 10% off
e-Library read for
1 day

CEN

EN 10213:2007+A1:2016(Main + Amendment)

Steel castings for pressure purposes

SIST EN 10213:2008+A1:2016

This European Standard applies to steel castings for pressure containing parts. It includes materials which are used for the manufacture of components, for pressure equipment.
This European Standard relates to castings characterised by their chemical composition (see Table 2) and mechanical properties (see Tables 3 to 6).
In cases where castings are joined by welding by the founder, this European Standard applies.
In cases where castings are welded:
-   to wrought products (plates, tubes, forgings), or
-   by non founders,
this European Standard does not apply.
NOTE   For this harmonised supporting standard for materials, presumption of conformity to the Essential Requirements of the Directive is limited to technical data of the material in the standard and does not presume adequacy of the material to specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the Essential Requirements of the Pressure Equipment Directive (PED) are satisfied.