EN 17443:2021
(Main)Winter service equipment - Brine production systems - Requirements and test methods
Winter service equipment - Brine production systems - Requirements and test methods
This document specifies the essential requirements of stationary systems for production of brines for winter road maintenance and includes tests of these requirements. Installation boundary: chloride and water inlet to the saturator, brine outlet to the spreading machine. Within the scope are materials, brine storage and brine loading/unloading equipment also. Mobile systems for production of brines in situ are not content of this document.
The following points are not covered by this document:
- System and construction requirements;
- Requirements according to national and European legislations.
Winterdienstausrüstung - Soleerzeuger - Anforderungen und Prüfverfahren
Dieses Dokument legt die grundlegenden Anforderungen an stationäre Soleerzeuger für den Winterdienst fest und enthält Prüfverfahren zu diesen Anforderungen. Anlagengrenzen: Chlorid- und Wasser¬einlass in den Soleerzeuger, Soleauslass in die Streumaschine. In den Anwendungsbereich fallen auch die Ausgangsstoffe, die Solelagerung und die Solebe- und entladeausrüstung. Mobile Anlagen für die Soleerzeugung an Ort und Stelle sind nicht Inhalt dieses Dokuments.
Die folgenden Punkte werden in diesem Dokument nicht behandelt:
- System- und Konstruktionsanforderungen;
- Anforderungen nach nationaler und europäischer Gesetzgebung.
Matériels de viabilité hivernale - Unités de production de saumure - Exigences et méthodes d’essai
Le présent document spécifie les exigences essentielles pour les centrales fixes de production de saumures pour l’entretien hivernal des routes et inclut les essais relatifs à ces exigences. Limites de l’installation : entrée de chlorure et d’eau vers le saturateur, sortie de saumure vers le matériel d’épandage. Les matériaux, le stockage de la saumure et l’équipement de chargement/déchargement de la saumure sont également inclus dans le domaine d’application. Les systèmes mobiles pour la production de saumures in situ ne sont pas couverts par le présent document.
Les points suivants ne sont pas couverts par le présent document :
- Exigences relatives au système et à la construction ;
- Exigences selon les législations nationales et européennes.
Oprema za zimska vzdrževalna dela - Sistemi za proizvodnjo slanice - Zahteve in preskusne metode
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17443:2021
01-oktober-2021
Oprema za zimska vzdrževalna dela - Sistemi za proizvodnjo slanice - Zahteve in
preskusne metode
Winter service equipment - Brine production systems - Requirements and test methods
Winterdienstausrüstung - Soleerzeugungsanlagen - Anforderungen und Prüfmethoden
Matériels de viabilité hivernal - Unités de production de saumure - Exigences et
méthodes d'essais
Ta slovenski standard je istoveten z: EN 17443:2021
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 17443:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17443:2021
---------------------- Page: 2 ----------------------
SIST EN 17443:2021
EN 17443
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2021
EUROPÄISCHE NORM
ICS 13.030.40
English Version
Winter service equipment - Brine production systems -
Requirements and test methods
Matériels de viabilité hivernale - Unités de production Winterdienstausrüstung - Soleerzeuger -
de saumure - Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 28 June 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17443:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17443:2021
EN 17443:2021 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Materials . 7
4.1 Chlorides . 7
4.2 Water . 7
5 Requirements . 8
5.1 Brine production capacity . 8
5.2 Brine concentration . 8
5.3 Brine purity . 8
5.3.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.