Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods

This Technical Specification defines general specifications and performance criteria of other solid and liquid de-icing agents than chlorides of sodium, calcium and magnesium, hereinafter referred to products, for the use in winter service on roads and on roads for specific uses, with the exception of runways and parking areas of aircrafts. It establishes the test methods to control them. The products include inorganic and organic de-icing agents, and mixtures of chlorides of sodium, calcium, magnesium and potassium with organic and inorganic components which are intended for special properties like inhibition of corrosion, enhanced melting capacity or improved spreading pattern.
NOTE   This Technical Specification defines specifications and performance criteria and offers for each a variation in the form of classes of requirements. This does not mean that there are products likely to respond to all the classes and criteria of the standard. Therefore, when defining the demand the user needs to make sure prior the appropriateness of his choice and the availability of suitable products.

Winterdienstausrüstung - Enteisungsmittel - Teil 3: Andere feste und flüssige Enteisungsmittel - Anforderungen und Prüfverfahren

Diese Technische Spezifikation legt allgemeine Spezifikationen und Leistungskriterien für andere feste und flüssige Enteisungsmittel als Natrium-, Calcium- und Magnesiumchlorid fest, nachfolgend bezeichnet als Produkte, die aufgrund ihrer besonderen Eigenschaften für einen speziellen Zweck im Winterdienst auf Straßen zum Einsatz kommen, mit Ausnahme von Start- und Landebahnen sowie Abstellplätzen für Flugzeuge. Sie legt die Prüf¬verfahren zur Kontrolle dieser Leistungskriterien fest. Zu den Produkten gehören Enteisungsmittel und Gemische aus Natrium-, Calcium-, Magnesium- und Kaliumchlorid mit organischen und an¬organischen Bestandteilen, die für besondere Eigenschaften vorgesehen sind, z. B. Korrosionsschutz, ge¬steigerte Tauleistung oder verbessertes Streubild.
ANMERKUNG   Diese Technische Spezifikation definiert Spezifikationen und Leistungskriterien und bietet für jedes Kriterium eine Variation in Form von Anforderungsklassen. Das bedeutet nicht, dass es Produkte gibt, die auf alle Klassen und Kriterien der Norm zutreffen. Daher muss der Anwender bei der Festlegung der Anforderungen im Voraus die Angemessenheit seiner Auswahl und die Verfügbarkeit geeigneter Produkte sicherstellen.

Équipements de viabilité hivernale - Fondants routiers - Partie 3 : Autres fondants routiers solides et liquides - Exigences et méthodes d'essai

Oprema in proizvodi za zimska vzdrževalna dela - Sredstva za odtajanje - 3. del: Druga trdna in tekoča sredstva za odtajanje - Zahteve in preskusne metode

Ta tehnična specifikacija določa splošne specifikacije in merila učinkovitosti drugih trdnih in tekočih sredstev za odtajanje, ki niso kloridi natrija, kalcija in magnezija (v nadaljnjem besedilu: izdelki), ki se uporabljajo za zimska vzdrževalna dela na cestah in na cestah za posebno uporabo, razen vzletno-pristajalnih stez in parkirišč za letala. Določa preskusne metode za njihov nadzor. Izdelki vključujejo anorganska in organska sredstva za odtajanje ter mešanice kloridov natrija, kalcija, magnezija in kalija z organskimi in anorganskimi sestavinami, ki imajo posebne lastnosti, kot je zaviranje korozije, večja zmogljivost taljenja ali boljši vzorec širjenja.
OPOMBA: Ta tehnična specifikacija določa specifikacije in merila učinkovitosti ter za posamezne izdelke vsebuje različice v obliki razredov zahtev. To ne pomeni, da izdelki ustrezajo vsem razredom in merilom v standardu. Zato mora uporabnik pri opredelitvi povpraševanja najprej preveriti, ali je njegova izbira primerna in ali so na voljo primerni izdelki.

General Information

Status
Published
Publication Date
27-Oct-2015
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jan-2024
Completion Date
15-Jan-2024

Buy Standard

Technical specification
TS CEN/TS 16811-3:2016
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 16811-3:2015
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16811-3:2016
01-januar-2016
2SUHPDLQSURL]YRGL]D]LPVNDY]GUåHYDOQDGHOD6UHGVWYD]DRGWDMDQMHGHO
'UXJDWUGQDLQWHNRþDVUHGVWYD]DRGWDMDQMH=DKWHYHLQSUHVNXVQHPHWRGH
Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid
de-icing agents - Requirements and test methods
Winterdienstausrüstung und Produkte - Enteisungsmittel - Teil 3: Andere feste und
flüssige Enteisungsmittel - Anforderungen und Prüfverfahren
Équipements de viabilité hivernale - Agents de dégivrage - Partie 3: Autres agents de
dégivrage solides et liquides - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: CEN/TS 16811-3:2015
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
71.100.45 Hladiva in antifrizi Refrigerants and antifreezes
SIST-TS CEN/TS 16811-3:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16811-3:2016

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16811-3:2016


CEN/TS 16811-3
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

October 2015
TECHNISCHE SPEZIFIKATION
ICS 71.100.45; 13.030.40
English Version

Winter maintenance equipment - De-icing agents - Part 3:
Other solid and liquid de-icing agents - Requirements and
test methods
Équipements de viabilité hivernale - Agents de Winterdienstausrüstung - Enteisungsmittel - Teil 3:
dégivrage - Partie 3: Autres agents de dégivrage solides Andere feste und flüssige Enteisungsmittel -
et liquides - Exigences et méthodes d'essai Anforderungen und Prüfmethoden
This Technical Specification (CEN/TS) was approved by CEN on 5 April 2015 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16811-3:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Requirements and test methods . 7
4.1 General . 7
4.2 De-icing performance . 7
4.2.1 General . 7
4.2.2 Nancy-Test .
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 16811-3:2015
01-februar-2015
2SUHPD]D]LPVNDY]GUåHYDOQDGHOD6UHGVWYD]DRGWDMDQMHGHO'UXJDWUGQDLQ
WHNRþDVUHGVWYD]DRGWDMDQMH=DKWHYHLQSUHVNXVQHPHWRGH
Winter maintenance equipment - De-icing agents - Part 3: Other solid and liquid de-icing
agents - Requirements and test methods
Winterdienstausrüstung - Enteisungsmittel - Teil 3: Andere feste und flüssige
Enteisungsmittel - Anforderungen und Prüfmethoden
Équipements de viabilité hivernale - Agents de dégivrage - Partie 3: Autres agents de
dégivrage solides et liquides - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: FprCEN/TS 16811-3
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
71.100.45 Hladiva in antifrizi Refrigerants and antifreezes
kSIST-TS FprCEN/TS 16811-3:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 16811-3:2015

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 16811-3:2015

TECHNICAL SPECIFICATION
FINAL DRAFT
FprCEN/TS 16811-3
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

December 2014
ICS
English Version
Winter maintenance equipment - De-icing agents - Part 3: Other
solid and liquid de-icing agents - Requirements and test methods
Équipements de viabilité hivernale - Agents de dégivrage - Winterdienstausrüstung - Enteisungsmittel - Teil 3: Andere
Partie 3: Autres agents de dégivrage solides et liquides - feste und flüssige Enteisungsmittel - Anforderungen und
Exigences et méthodes d'essai Prüfmethoden


This draft Technical Specification is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
337.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change without notice
and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 16811-3:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 16811-3:2015
FprCEN/TS 16811-3:2014 (E)
Contents Page
Foreword .5
Introduction .6
1 Scope .7
2 Normative references .7
3 Terms and definitions .8
4 Requirements and test methods .8
4.1 De-icing performance .9
4.1.1 Nancy-Test .9
4.1.2 Inzell-Test .9
4.1.3 Freezing curve .9
4.2 Slip resistance .9
4.3 Heavy metals and hydrocarbons .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.