EN ISO 3691-6:2015

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)

ISO 3691-6:2013 gives safety requirements and the means for their verification for self-propelled carriers designed for carrying burdens without lifting, as defined in ISO 5053, and/or personnel carriers, having three or more wheels, a maximum speed not exceeding 56 km/h and a load capacity not exceeding 5 000 kg.
It is applicable to trucks equipped with a platform (which can be tilting) for the purpose of carrying materials or with a number of seats for the purpose of transporting passengers.
It is not applicable to vehicles intended primarily for earth-moving or over-the-road hauling, driverless trucks, golf cars, or tractors with a drawbar pull up to and including 20 000 N equipped with a platform for the purpose of carrying materials.

Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 6: Lasten- und Personentransportfahrzeuge (ISO 3691-6:2013)

Chariots de manutention - Exigences de sécurité et vérification - Partie 6: Transporteurs de charges et de personnel (ISO 3691-6:2013)

L'ISO 3691-6:2013 donne des spécifications de sécurité et les moyens de les vérifier pour des chariots automoteurs sans levage conçus pour le transport de charges tels que définis dans l'ISO 5053 et/ou des transporteurs de personnel, équipés au minimum de trois roues, et dont la vitesse maximale est limitée à 56 km/h et dont la capacité de charge ne dépasse pas 5 000 kg.
Elle s'applique aux chariots équipés d'une plate-forme (qui peut être inclinable) destinée au transport de matériaux ou comportant des sièges et destinée au transport de passagers.
L'ISO 3691-6:2013 ne s'applique pas aux véhicules destinés principalement aux opérations de terrassement ou de traction sur route, chariots sans conducteur, voiturettes de golf et tracteurs ayant une barre de traction tractant jusqu'à 20 000 N, équipés d'une plate-forme pour le transport des matériaux.

Vozila za talni transport - Varnostne zahteve in preverjanje - 6. del: Tovorni in osebni vozički (ISO 3691-6:2013)

Ta del standarda ISO 3691 določa varnostne zahteve in način za njihovo preverjanje za samognana vozila za talni transport, kot je določeno v standardu ISO 5053 in/ali osebne vozičke s tremi ali več kolesi, katerih najvišja hitrost ne presega 56 km/h, z maksimalno nosilnostjo 5000 kg (v nadaljnjem besedilu vozički ali vozila).
Ta del standarda ISO 3691 velja za vozila z dvižno ploščadjo (lahko z možnostjo naklona) za prenašanje materialov ali vozila z več sedeži za prevoz potnikov. Standard se ne uporablja za:
– vozila, namenjena predvsem za zemeljska dela ali vleko po cesti,
– vozila brez voznika,
– vozila za golf,
– vlačilce z vlečno silo do vključno 20.000 N, opremljene s ploščadjo za prevoz materiala.
Ta del standarda ISO 3691 opisuje vsa večja tveganja, nevarne situacije in nevarne dogodke, kot je navedeno v dodatku A, v zvezi z ustreznimi stroji, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec.
Ne postavlja zahtev za nevarnosti, ki so mogoče pri uporabi vozil na javnih cestah ali pri upravljanju vozil v potencialno eksplozivnih atmosferah.
Regijske zahteve, dodatne k zahtevam v tem delu standarda ISO 3691, so obravnavane v
standardu ISO/TS 3691-7 in ISO/TS 3691-8.

General Information

• Status: Withdrawn
• Publication Date: 27-Oct-2015
• Withdrawal Date: 26-Oct-2021
• ICS: 53.060 - Industrial trucks
• Technical Committee: CEN/TC 150 - Industrial trucks - Safety
• Drafting Committee: CEN/TC 150 - Industrial trucks - Safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Oct-2021
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 3691-6:2016 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)

Relations

• Replaces: EN ISO 3691-6:2013/AC:2014 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)
• Effective Date: 28-Oct-2015
• Replaces: EN ISO 3691-6:2013 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)
• Effective Date: 28-Oct-2015
• Replaced By: EN ISO 3691-6:2021 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2021)
• Effective Date: 03-Nov-2021
• Amended By: EN ISO 3691-6:2015/prA1 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers - Amendment 1
• Effective Date: 08-Jun-2022
• Corrected By: EN ISO 3691-6:2015/AC:2016 - Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2016
1DGRPHãþD
SIST EN ISO 3691-6:2014
SIST EN ISO 3691-6:2014/AC:2014
9R]LOD]DWDOQLWUDQVSRUW9DUQRVWQH]DKWHYHLQSUHYHUMDQMHGHO7RYRUQLLQ
RVHEQLYR]LþNL,62
Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel
carriers (ISO 3691-6:2013)
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 6: Lasten
- und Personentransportfahrzeuge (ISO 3691-6:2013)
Chariots de manutention - Exigences de sécurité et vérification - Partie 6: Transporteurs
de charges et de personnel (ISO 3691-6:2013)
Ta slovenski standard je istoveten z: EN ISO 3691-6:2015
ICS:
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 3691-6
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2015
EUROPÄISCHE NORM
ICS 53.060 Supersedes EN ISO 3691-6:2013
English Version
Industrial trucks - Safety requirements and verification -
Part 6: Burden and personnel carriers (ISO 3691-6:2013)
Chariots de manutention - Exigences de sécurité et Flurförderzeuge - Sicherheitstechnische
vérification - Partie 6: Transporteurs de charges et de Anforderungen und Verifizierung - Teil 6: Lasten- und
personnel (ISO 3691-6:2013) Personentransportfahrzeuge (ISO 3691-6:2013)
This European Standard was approved by CEN on 7 October 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3691-6:2015 E
worldwide for CEN national Members.

Contents Page
Eurpean foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 4

European foreword
The text of ISO 3691-6:2013 has been prepared by Technical Committee ISO/TC 110 “Industrial trucks”
of the International Organization for Standardization (ISO) and has been taken over as EN
ISO 3691-6:2015 by Technical Committee CEN/TC 150 “Industrial Trucks - Safety” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2016, and conflicting national standards shall be
withdrawn at the latest by April 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 3691-6:2013.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3691-6:2013 has been approved by CEN as EN ISO 3691-6:2015 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to Essential
Requirements of the New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the clauses of
this standard, except clause 6.2.5 and with the exclusion of all references to ISO/TS 3691-8 confers,
within the limits of the scope of this standard, a presumption of conformity with the Essential
Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the products falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 3691-6
First edition
2013-09-01
Industrial trucks — Safety
requirements and verification —
Part 6:
Burden and personnel carriers
Chariots de manutention — Exigences de sécurité et vérification —
Partie 6: Transporteurs de charges et de personnel
Reference number
ISO 3691-6:2013(E)
©
ISO 2013
ISO 3691-6:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO 3691-6:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective measures . 3
4.1 General . 3
4.2 Starting/moving. 3
4.3 Brakes . 4
4.4 Manual control actuators . 4
4.5 Power systems and accessories. 7
4.6 Operator and passenger positions .10
4.7 Stability .12
4.8 Protective devices .12
4.9 Visibility/lighting .13
4.10 Environmental conditions .14
4.11 Transport .15
5 Verification of safety requirements and/or protective measures .15
5.1 General .15
5.2 Functional verification .15
6 Information for use .16
6.1 General .16
6.2 Instruction handbook(s) .16
6.3 Marking .19
Annex A (informative) List of significant hazards.21
Bibliography .26
ISO 3691-6:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in
...