EN ISO 7380-2:2011

Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)

ISO 7380-2:2011 specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduced loadability.

Schrauben mit abgeflachtem Halbrundkopf - Teil 2: Schrauben mit abgeflachtem Halbrundkopf mit Innensechskant und Bund (ISO 7380-2:2011)

Diese Internationale Norm legt die Eigenschaften von Schrauben mit abgeflachtem Halbrundkopf mit Bund und Innensechskant sowie Gewinden von M3 bis einschließlich M16 in Produktklasse A sowie eingeschränkter Belastbarkeit nach Tabelle 3 fest.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so können diese den bestehenden Internationalen Normen entnommen, z. B. ISO 261, ISO 888, ISO 898-1, ISO 965-2 und ISO 4759-1.

Vis à tête cylindrique bombée plate - Partie 2: Vis à tête cylindrique bombée plate à six pans creux à embase plate (ISO 7380-2:2011)

L'ISO 7380-2:2011 spécifie les caractéristiques des vis à tête cylindrique bombée plate à six pans creux à embase plate, à capacité de charge réduite, de diamètres de filetage M3 à M16 inclus, et de grade A.

Vijaki s sploščeno polkrožno glavo - 2. del: Sploščena polkrožna glava z robom in notranjim šestkotnikom (ISO 7380-2:2011)

Ta mednarodni standard določa značilnosti vijakov s sploščeno polkrožno glavo z robom in notranjim šestkotnikom z navoji od M3 do vključno M16 razreda izdelave A in z znižano nosilnostjo skladno z preglednico 3. Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, tj. ISO 261, ISO 888, ISO 898-1, ISO 965-2 in ISO 4759-1.

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-2011
• Withdrawal Date: 10-Jan-2023
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Jan-2023
• Ref Project: SIST EN ISO 7380-2:2011 - Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)

Relations

• Replaced By: EN ISO 7380-2:2023 - Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
• Effective Date: 16-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7380-2:2011
01-oktober-2011
1DGRPHãþD
SIST EN ISO 7380:2004
9LMDNLVVSORãþHQRSRONURåQRJODYRGHO6SORãþHQDSRONURåQDJODYD]URERPLQ
QRWUDQMLPãHVWNRWQLNRP,62
Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-
2:2011)
Halbrundkopfschrauben (abgeflacht) - Teil 2: Abgeflachter Halbrundkopf mit Bund und
Innensechskant (ISO 7380-2:2011)
Vis à tête cylindrique bombée plate - Partie 2: Vis à tête cylindrique bombée plate à six
pans creux à embase plate (ISO 7380-2:2011)
Ta slovenski standard je istoveten z: EN ISO 7380-2:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 7380-2:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7380-2:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 7380-2:2011


EUROPEAN STANDARD
EN ISO 7380-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2011
ICS 21.060.10
English Version
Button head screws - Part 2: Hexagon socket button head
screws with collar (ISO 7380-2:2011)
Vis à tête cylindrique bombée plate - Partie 2: Vis à tête Halbrundkopfschrauben (abgeflacht) - Teil 2: Abgeflachter
cylindrique bombée plate à six pans creux à embase plate Halbrundkopf mit Bund und Innensechskant (ISO 7380-
(ISO 7380-2:2011) 2:2011)
This European Standard was approved by CEN on 22 July 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7380-2:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7380-2:2011
EN ISO 7380-2:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7380-2:2011
EN ISO 7380-2:2011 (E)
Foreword
This document (EN ISO 7380-2:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn
at the latest by February 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 7380-2:2011 has been approved by CEN as a EN ISO 7380-2:2011 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 7380-2:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 7380-2:2011

INTERNATIONAL ISO
STANDARD 7380-2
First edition
2011-08-01

Button head screws —
Part 2:
Hexagon socket button head screws with
collar
Vis à tête cylindrique bombée plate —
Partie 2: Vis à tête cylindrique bombée plate à six pans creux à embas
...